metal inspector.
$23 per hourRandstad
Great opportunity in Surrey BC, we are currently looking for a Ground Inspector/ Metal Inspector to work in a busy automotive yard.
The Grounds Inspector plays a key role in daily yard operations by inspecting incoming customer loads, directing them to the appropriate unloading areas, and maintaining clear communication across the facility via radio. This position helps ensure safe, efficient, and organized material handling throughout the yard. This position is best suited if you enjoy a shipping and receiving area, understands metals, mechanics and takes pride in quality control than this is the perfect fit.The ideal candidate for this position is someone who enjoys hands-on, physical work in a fast-paced outdoor environment and takes pride in maintaining quality and operational efficiency. What We’re Looking For:
A strong work ethic with the ability to focus and complete tasks independently
Comfortable performing physically demanding work in varying weather conditions
Excellent attention to detail with a commitment to safety and quality
Ability to communicate effectively with team members and customers
Previous experience in scrap metal, construction, or industrial yard work is an asset but not required
Location: Surrey, BC -Location is a 20-minute walk from Scott Road Station. A vehicle is preferred for this positionSchedule: Monday-Friday + Saturday (as needed)
Shift Time: 6:30AM - 4:30PM (Monday to Friday) + 7:30 AM - 2:00 PM (Saturday if needed)
Wage: $23.00/H You can meet the shift and schedule requirements
You are comfortable working in a physically demanding and outdoor environment
Equipment On-Site: Shredder, forklifts, skid steers, loaders, scrap handlers, mobile and stationary shears, car crusher, rock trucks, vacuum truck
You have CSA approved Steel Toe Boots
This is a full-time position, the ideal candidate will need to be available to start immediately.
You are legally permitted to work full-time in British Columbia Advantages
* Pay Rate: $23/H
* Located in Surrey (Close to Scott Road Station)
* Weekly Pay (Direct Deposits)
* Minimum 40 hours a week and opportunities for overtime
* 4% Vacation Pay added to every pay
* Extensive training
* Opportunities for growth
* Team working environment
* Free Parking on site Responsibilities
* Report problems and communicate throughout the facility via radio
* General yard clean up and repairs
* Greet customers
* Inspect customer loads and directing them to the proper location in the yard to unload
* Basic sorting of scrap material and quality inspection
* Grading of material and deductions
* Doing basic quality assurance of materials
* Accurately recording of production data
* Climbing up truck ladders to inspect load
* Participating in safety, quality and environmental inspections
* Located in Surrey, B.C. Qualifications
* You can meet the schedule and shift time: Monday to Saturday
* High School diploma, GED Certification, or equivalent experience in a similar role preferred
* Min of 1+ years of experience working in a yard or automotive garage environment
* Mechanically inclined/experience using hand/power tools
* Attention to detail and ability to follow instructions
* You are comfortable working in a covered outdoor environment in all types of weather
* No physical limitations and ability to lift up to 55 lbs, and stand/walk for 8 hour shift
* Good attitude and can work well with no supervision and with the team
* You have High Ankle Steel Toe Boots with Toe Cover (metatarsal protector)
* Located in Surrey, BC
* Vehicle is preferred for this role -Location is a 20-minute walk from Scott Road Station. Summary
If you have the skills/qualifications detailed above we would love to connect further.
Send your updated resume directly to View email address on randstad.com
Please ensure to state the job role in the email subject line. While all applications are appreciated, only qualified candidates already in the British Columbia area will be considered and contacted. For more opportunities with us, please visit the link below Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community. Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to View email address on randstad.com to ensure their ability to fully participate in the interview process. show more
Vacancy posted a month ago
Similar jobs that could be interesting for youBased on the metal inspector. in Surrey, BC vacancy
- “TWG” is the group name we use to refer to the industry’s foremost producers of quality winches, hoists, gear drives and electronic monitoring systems for global industrial applications. The seven brands comprising TWG include Tulsa Winch, Rufnek, Greer, dp Winch, Gear Products...SuggestedLong term contractTemporary workFlexible hours
$37 per hour
Overview Languages English Education ~ Secondary (high) school graduation certificate Experience 1 to less than 7 months On site Work must be completed at the physical location. There is no option to work remotely. Responsibilities Tasks...SuggestedPermanent employmentFull timeRemote work$24 per hour
...Friday Weekend Day and Night Shifts 4 10 hour days IEM Canada is seeking experienced and hard-working individuals to join our team as Metal Fabricator. Responsibilities: Read, interpret and follow basic diagrams, engineering drawings, specifications, bills of...SuggestedHourly payPermanent employmentFull timeMonday to fridayShift workNight shiftDay shift$25 per hour
...in North America for over half a century. The Quality Control Inspector is responsible for implementing quality control systems designed... ...Capacity · Strong Mechanical and Electrical Aptitude · Metal Fabrication Knowledge · Problem Solving/Analytical ability ·...SuggestedHourly payPermanent employmentFull timeInternshipImmediate startShift work$30 - $38 per hour
We’re hiring two Senior Metal Polishers for a well-established precision fabrication facility with over 50 years in operation. This is a fast-paced, high-output environment known for consistent work, quality standards, and long-term stability. This role is ideal for skilled...SuggestedHourly payLong term contractExtra incomePermanent employmentFull timeImmediate startMonday to fridayShift work$61k - $75k per year
...mentorship and professional development that ensures a rewarding career within our organization. The Opportunity The Civil Field Inspector will perform field inspections and prepare field review reports and help resolve issues in the field. As a Civil Field Inspector,...Full timeContract workFor contractorsWork at officeLocal areaFlexible hours$35 - $50 per hour
...on mentorship and professional development that ensures a rewarding career within our organization. The Opportunity The Field Inspector position is a contracted role of approximately 18 months, and will be based out of Lytton, British Columbia, where the successful...Hourly payContract workFor contractorsWork at officeLocal area$48.08 - $57.69 per hour
...Lead daily activities of Inspection Technicians across assigned metal fab, bus fab and product lines within the site. Align inspection... ..., and attendance compliance. SUPERVISION OF PERSONNEL ~ QC Inspectors. Note: This job description is not intended to be all-...Hourly payLong term contractFull time$37.5 per hour
...meet standards and/or specifications Operate manual or semi-automatic flame-cutting equipment Operate brakes, shears and other metal shaping, straightening and bending machines Fit, braze and torch-straighten metal Determine weldability of materials Operate...Permanent employmentFull timeRemote work$37.5 per hour
...buildings Read blueprints, drawings and specifications to determine work requirements Repair roofing systems Install and repair metal roofs using hand and power tools Additional information Work conditions and physical capabilities Physically demanding...Permanent employmentFull timeRemote work$37 per hour
...and shakes on sloped roofs of buildings Repair or replace single-ply roofing systems Instruct apprentices Install and repair metal roofs using hand and power tools Install sheet metal flashings Estimate costs and materials Erect and install scaffolding, falsework...ApprenticeshipRemote work- ...specifications, manuals and processes Operate manual or semi-automatic flame-cutting equipment Operate brakes, shears and other metal shaping, straightening and bending machines Operate previously set-up brazing or soldering machines to bond metal or to fill holes,...Full time
$36.8 per hour
...specifications, manuals and processes Operate manual or semi-automatic flame-cutting equipment Operate brakes, shears and other metal shaping, straightening and bending machines Operate previously set-up brazing or soldering machines to bond metal or to fill holes,...Permanent employmentFull timeRemote work- ...welds and ensure that they meet standards and/or specifications Operate previously set-up welding machines to fabricate or repair metal parts and products Operate previously set-up brazing or soldering machines to bond metal or to fill holes, indentations and seams of...
$28.1 per hour
...At heights Outdoors Responsibilities Tasks Apply successive coats of compound and sand seams and joints Cut and install metal corner beads to protect exterior corners Fabricate and install suspended metal ceiling grids and place in panels to form acoustical...Permanent employmentFull timeInternshipRemote work$28.07 per hour
...option to work remotely. Responsibilities Tasks Apply successive coats of compound and sand seams and joints Cut and install metal corner beads to protect exterior corners Fabricate and install suspended metal ceiling grids and place in panels to form acoustical...Permanent employmentFull timeRemote work$45 per hour
...Perform repair work on heavy trucks Service attachments and working tools Assist process and machine operators in mineral ore and metal processing Perform other routine maintenance Additional information Work conditions and physical capabilities Physically...Remote work- ...using micrometers, callipers or other devices Clean and maintain equipment Operate and control: electroplating equipment to coat metal, hot-dip metal plating equipment to galvanize metal and/or spray equipment to build up worn or damaged parts Paint small items and...
$36.7 - $39.5 per hour
...Responsibilities Tasks Apply successive coats of compound and sand seams and joints Clean and prepare surfaces Cut and install metal corner beads to protect exterior corners Fill joints, nail indentations, holes and cracks with joint compound using trowel and...Remote workRelocation$37 per hour
...surfaces Measure, cut, fit and install drywall sheets Mix plaster ingredients to desired consistency Position and secure sheets to metal or wooden studs or joists Spray acoustic or texture materials over walls and ceilings Install exterior and interior steel studs...Permanent employmentFull timeRemote workRelocation$37 per hour
...meet standards and/or specifications Operate manual or semi-automatic flame-cutting equipment Operate brakes, shears and other metal shaping, straightening and bending machines Operate previously set-up welding machines to fabricate or repair metal parts and products...Permanent employmentFull timeDay shiftEarly shift$34 - $38 per hour
...equipment Read and interpret welding blueprints, drawings specifications, manuals and processes Operate brakes, shears and other metal shaping, straightening and bending machines Fit, braze and torch-straighten metal Determine weldability of materials Operate...Permanent employmentFull timeRemote work$37 per hour
...Utiliser des appareils coupe-flamme manuels ou semi-automatiques Utiliser des presseuses, des cisailles et d'autres machines à former les métaux et des machines à redresser et à cintrer les métaux Utiliser des machines à souder à commandes réglables, afin de fabriquer ou...Permanent employmentFull timeDay shift- ...to join our team as a Manufacturing Engineering Technician. Position Summary : This role is responsible for the assembly of metal-based modular work bench/material storage systems for use on the manufacturing floor work centers. This position shall work closely...Long term contractFull timeWork at office
- ...determine work requirements Apply successive coats of compound and sand seams and joints Clean and prepare surfaces Cut and install metal corner beads to protect exterior corners Fill joints, nail indentations, holes and cracks with joint compound using trowel and...Full time
$32 per hour
...Instruct apprentices Supervise other workers Apply, level and smooth coats of plaster Clean and prepare surfaces Cut and install metal corner beads to protect exterior corners Fill joints, nail indentations, holes and cracks with joint compound using trowel and...Remote work$70k - $90k per year
...identifying potential issues and proposing innovative solutions WHAT YOU BRING TO THE TABLE: ~Your experience in SolidWorks design (sheet metal, plastic, or similar materials) will directly impact client satisfaction ~Use your engineering mindset and creativity to solve...Long term contractPermanent employmentManual laborFlexible hours$80k - $100k per year
...Mangers in detailed turnover sheets Assist Project Coordinators with change orders Piping take off ability is mandatory with sheet metal take off desirable but not mandatory Experience, Education & Qualifications: Minimum 4 years of experience in mechanical...Full timeFor contractorsWork at office$78k - $84k per year
...related machine shop instrumentation and equipment and apply accepted testing standards. Good working knowledge of the properties of metals and plastics. Basic technical report writing skills. Ability to assess the quality of fabrication work done by others. Good...RemplacementFull time$28 - $40 per hour
Ironworker to Metal Building Systems Erector PMC Builders and Developers Ltd. Location Surrey, BC Salary 28.00 to 40.00 hourly (To be negotiated) / 40 to 50 hours per week Full time Day, Overtime available Starts as soon as possible Benefits: Health benefits, Long term...Hourly payLong term contractFull timeImmediate startRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to metal inspector.. Be the first to apply!

