Flight Controls Engineer
Dominion Dynamics
Reports to:
Director, Aircraft SystemsType:
Full-TimeThe Role
Dominion Scout is Canada’s first autonomous collaborative platform (ACP) — a clean-sheet, sovereign aircraft designed autonomy-first, built to fly alongside fighter jets and operate in Arctic conditions no allied program is designing for. There is no pilot onboard to catch what the control system misses, so the control laws have to hold across the full envelope, through component failures, and in weather a simulator only approximates.You design and tune Scout’s flight control laws, from the dynamic model through to flight test. You turn mission requirements into GNC requirements, prove the design in simulation and on the rig, and close the loop with telemetry from real flights — working alongside the autonomy, simulation, test, and manufacturing teams taking the aircraft from design to first metal to flight.What You’ll Do
Design, model, and tune inner- and outer-loop control logic for fly-by-wire flight control systems across standard and dynamic flight regimes.
Build high-fidelity dynamic aircraft models in MATLAB/Simulink for control synthesis, performance evaluation, and handling qualities analysis.
Derive guidance, navigation, and control requirements from mission parameters, write the software and system requirements that follow, and drive the sizing and selection of actuators, sensors, and flight control hardware.
Lead the mechanical sizing, installation, monitoring & maintenance integration onto the airplane
Lead flight control testing across software-in-the-loop, hardware-in-the-loop, and real-time simulator testbeds, including fault injection and degraded-mode performance.
Write flight test plans, support real-time monitoring during test, analyze telemetry, and recalibrate control parameters between flights.
What You Bring
Experience designing and tuning flight control laws for fixed-wing or rotary-wing aircraft that flew — crewed or uncrewed, not only in simulation.
Strong grounding in classical and modern control theory, flight dynamics, and handling qualities.
Fluency in MATLAB/Simulink for aircraft modeling, control design, and analysis.
Hands-on SIL/HIL testing of flight control software, and comfort tracing a problem from telemetry back to the control law.
Experience deriving and writing GNC requirements and working inside a systems engineering process.
Working knowledge of safety analysis for flight-critical systems — FMEA, reliability, redundancy management.
Nice to Have
Flight test experience: test cards, on-console monitoring, and post-flight parameter identification.
Fly-by-wire redundancy architectures and fault-tolerant control.
Control law work for high-performance or highly agile aircraft.
Auto-code generation from Simulink to embedded flight software.
Flight controls for uncrewed aircraft, or for cold-weather and icing conditions.
Clean-sheet or demonstrator aircraft programs, or defence and dual-use air programs.
No defence background required.We’ve hired people who didn’t tick every box. If this is the work you want to do, please apply anyway.Why Join Us
Building something meaningful starts with the right people.At Dominion Dynamics, you’ll:Shape Canada’s future by building real defence capability for the CAF and our allies.
Make decisions that ship in a high-trust environment with short feedback loops and rapid iteration.
Move fast, field faster, and work directly with the operator — our systems are in the field with the CAF now.
Have an impact from day one with equity, responsibility, and direct access to leadership.
If you’re curious, hands-on, and driven by the opportunity to make a difference, this is where you belong!Compensation & Benefits
Competitive base salary and company equity*
Comprehensive health benefits
Additional equity granted based on impact*
We use AI tools to support parts of the hiring process, including screening and reviewing responses. Final hiring decisions are always made by people and follow all applicable privacy and employment laws in Canada.*Equity awarded to full time employees only.
#J-18808-Ljbffr
Director, Aircraft SystemsType:
Full-TimeThe Role
Dominion Scout is Canada’s first autonomous collaborative platform (ACP) — a clean-sheet, sovereign aircraft designed autonomy-first, built to fly alongside fighter jets and operate in Arctic conditions no allied program is designing for. There is no pilot onboard to catch what the control system misses, so the control laws have to hold across the full envelope, through component failures, and in weather a simulator only approximates.You design and tune Scout’s flight control laws, from the dynamic model through to flight test. You turn mission requirements into GNC requirements, prove the design in simulation and on the rig, and close the loop with telemetry from real flights — working alongside the autonomy, simulation, test, and manufacturing teams taking the aircraft from design to first metal to flight.What You’ll Do
Design, model, and tune inner- and outer-loop control logic for fly-by-wire flight control systems across standard and dynamic flight regimes.
Build high-fidelity dynamic aircraft models in MATLAB/Simulink for control synthesis, performance evaluation, and handling qualities analysis.
Derive guidance, navigation, and control requirements from mission parameters, write the software and system requirements that follow, and drive the sizing and selection of actuators, sensors, and flight control hardware.
Lead the mechanical sizing, installation, monitoring & maintenance integration onto the airplane
Lead flight control testing across software-in-the-loop, hardware-in-the-loop, and real-time simulator testbeds, including fault injection and degraded-mode performance.
Write flight test plans, support real-time monitoring during test, analyze telemetry, and recalibrate control parameters between flights.
What You Bring
Experience designing and tuning flight control laws for fixed-wing or rotary-wing aircraft that flew — crewed or uncrewed, not only in simulation.
Strong grounding in classical and modern control theory, flight dynamics, and handling qualities.
Fluency in MATLAB/Simulink for aircraft modeling, control design, and analysis.
Hands-on SIL/HIL testing of flight control software, and comfort tracing a problem from telemetry back to the control law.
Experience deriving and writing GNC requirements and working inside a systems engineering process.
Working knowledge of safety analysis for flight-critical systems — FMEA, reliability, redundancy management.
Nice to Have
Flight test experience: test cards, on-console monitoring, and post-flight parameter identification.
Fly-by-wire redundancy architectures and fault-tolerant control.
Control law work for high-performance or highly agile aircraft.
Auto-code generation from Simulink to embedded flight software.
Flight controls for uncrewed aircraft, or for cold-weather and icing conditions.
Clean-sheet or demonstrator aircraft programs, or defence and dual-use air programs.
No defence background required.We’ve hired people who didn’t tick every box. If this is the work you want to do, please apply anyway.Why Join Us
Building something meaningful starts with the right people.At Dominion Dynamics, you’ll:Shape Canada’s future by building real defence capability for the CAF and our allies.
Make decisions that ship in a high-trust environment with short feedback loops and rapid iteration.
Move fast, field faster, and work directly with the operator — our systems are in the field with the CAF now.
Have an impact from day one with equity, responsibility, and direct access to leadership.
If you’re curious, hands-on, and driven by the opportunity to make a difference, this is where you belong!Compensation & Benefits
Competitive base salary and company equity*
Comprehensive health benefits
Additional equity granted based on impact*
We use AI tools to support parts of the hiring process, including screening and reviewing responses. Final hiring decisions are always made by people and follow all applicable privacy and employment laws in Canada.*Equity awarded to full time employees only.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Flight Controls Engineer in Winnipeg, MB vacancy
$153.92k - $168.48k per year
Senior Flight Controls Engineerhybrid full-time. October 20, 2026 5296 Bell School Line, Burlington... ...OverviewAs a Senior Flight Controls Engineer, you will collaborate with peers to:... ...aircraft, including propeller and piston-engine propulsion A pilot licence, or experience...SuggestedPermanent employmentFull timeContract workImmediate startRemote workRelocation- Airbus recherche un ingénieur spécialisé en développement et intégration des composants hydro-mécaniques pour le programme A220, basé à Mirabel (Québec). Vous travaillerez en étroite collaboration avec les équipes à Mirabel, Toulouse et Bremen. Vous participerez à toutes les...Suggested
- ...systems, software, hardware and certification engineering services to the aerospace, defense, space... ..., Unmanned Aerial Vehicle and autonomous flight. The MANNARINO culture is focused on... ...development of safety-critical flight control and embedded control systems. Participate...SuggestedLong term contractWork at officeRemote work1 day per week
- Shape the future of aviation as a Senior Flight Control Laws Engineer in Montreal, Canada. This position focuses on advanced design and analysis of flight control laws using Matlab and C++. You will be instrumental in developing and validating control laws, benefiting from...Suggested
- Embedded Software andFlight Controls EngineerCareers // Position 01 UAV Design and Development Discipline Software / Flight Controls Status Open Skymark Aerospace develops... ...onboard sensing technologies. Our engineering work brings mechanical, electrical,and software...Suggested
- Develop aerospace flight controls at Bombardier’s Administrative Centre in Dorval, supporting testing, modeling, certification, and aircraft performance analysis.This professional engineering assignment focuses on the design, development, and analysis of Fly-by-Wire control...
- Use MATLAB simulation and servo-loop expertise to evaluate flight control systems for MTLS Aerostructure’s aerospace engineering services. French and English communication are required.This aerospace engineering role focuses on flight control system modeling, simulation, testing...
- Flight Control Laws Design, Development, and Analysis EngineerLocation: Montreal, Canada (Onsite) Visa: Canadian citizen /PR Position... ...Requirements Hold a bachelor’s or master’s degree in Aerospace Engineering; a PhD degree is preferred Have a minimum of 10 years of...
- Cyient Limited in Montreal, Canada, seeks an aerospace engineer to develop Flight Control Laws for fly-by-wire systems, using Matlab and C++ to enhance CLaws design and tooling. You will support CLaws, autopilot, and navigation design for R&D projects, write system requirements...
- ThoughtStorm Inc. seeks a Senior Aerospace Engineer with expertise in Fly-By-Wire (FBW) and Secondary Flight Control Systems to support integration, development, and certification of aircraft systems. You will lead FBW/secondary flight control integration, develop design philosophy...
- Bombardier Aerospace in Dorval, QC, seeks a Senior Professional Engineer to lead Fly By Wire and Secondary Flight Control System activities. You will integrate FBW/Secondary Flight Controls on the aircraft, coordinate with suppliers, and develop and verify system requirements...
- Axius Group, LLC is seeking a Technical Expert to contribute to Flight Control Laws Design & Development. This mid-senior level role supports the Airlines and Aviation sector with advanced design work in a full-time capacity. The position is based in the United States, with...Full time
- Volatus Aerospace in Vaughan, Canada, is seeking a Controls & Dynamics Engineer to advance UAV flight behaviour across configurations and operating conditions. You will work with avionics, software, and test teams to improve stability, control response, and mission performance...
- Senior Flight Controls Systems Engineer - Fly-by-Wire Employment Options: Contract, Contract-to-Hire, or Direct Hire Contract Duration: 6-12 months, where applicable Work Arrangement: Hybrid, typically 2-3 days per week onsite; subject to change Locations...Contract workDirect hireWork at office2 days per week3 days per week
- ...aircraft systems integration experience, have you worked in Flight Controls domain and would you like to progress and develop new skills?... ...Aircraft Flight Controls Systems Lead to join our Chief Engineering team based in Mirabel (Québec, Canada). You will be part of...WorldwideOverseas
- Elevate your career at Bombardier as a Technical Expert in Engineering focusing on Flight Control Laws Design. This role supports hybrid work and entails Matlab and C++ programming to develop innovative solutions. In this pivotal role, you will apply your 10+ years of experience...
- ...is for you! The A220 commercial aircraft program is seeking a Flight Control Systems Certification Specialist to join the Aircraft Controls... ...structures design groups, certification authorities, and various engineering disciplines to deliver reliable and safe systems for the A220....Worldwide
- Overview Title: Senior Fly-By-Wire & Secondary Flight Control Systems EngineerLocation: Montreal, QuebecPosition type: FTEResponsibilities... ...You hold a bachelor’s degree in mechanical or aerospace engineering and have a minimum of 7 years experience in aerospace related...
- We are looking for a Senior Aerospace Engineer with expertise in Fly-By-Wire (FBW) and Secondary Flight Control Systems to support aircraft system integration, development, and certification. Lead the integration of FBW and Secondary Flight Control Systems into...
- Technical Skills Secondary Flight ControlsRig and Aircraft TestingExperience Requirements 7+ years of experience in aerospace engineering, preferably with flight control systems.Flight Controls & Aircraft Systems Experience with Fly-By-Wire (FBW) and/or Secondary Flight...
- ...Competitive base salary Retirement savings plan Employee Assistance Program Tele Health Program FBW & Secondary Flight Controls System – Engineering ProfessionalAt Bombardier Aerospace, our employees work together to evolve mobility worldwide - one good idea at a time...Worldwide
- ...revoir l'analyse pour évaluer la faisabilité des concepts. Développer, valider et vérifier les exigences techniques du système de contrôle de vol. Examiner / préparer les exigences techniques. Examiner / préparer les procédures de test. Exécuter des essais sur bon...Temporary work
- IVVQ Manager - Flight Control Application/ Solution Applicative Commande de VolMontréal, QC (Hybride) Temps plein Résumé du posteDans le cadre du développement d’une solution applicative critique dans le domaine des commandes de vol, l’IVVQ Manager est responsable de dénir...Full time
$112k - $140k per year
Senior Flight Software Engineer/MTSAversan Inc. ( is a trusted multi-service engineering and electronics manufacturing company. Aversan delivers... ...maintain Reliability Status security clearance and meet Controlled Goods Program (CGP) security assessment requirements, with...- Bombardier Transportation GmbH is seeking a Technical Expert for Flight Control Laws Design in Dorval, Quebec. This role involves developing... ...Matlab and C++. Candidates should hold a degree in Aerospace Engineering and have at least 10 years of experience with FBW aircraft. Proficiency...Flexible hours
- Lead the Flight Control Systems (FCS) IPT and ensure alignment with aircraft program milestones. Own scope, schedule, cost, quality, and technical... ...Qualifications Bachelor's or Master's degree in Aerospace Engineering, Control Systems Engineering, Mechanical Engineering, or...
- Airbus in Mirabel, Québec seeks an Aircraft Flight Controls Systems Lead to drive the end-to-end development of flight control systems within the Chief Engineering team. You will own the architecture, validation strategies and work with cross-functional teams to ensure airworthiness...
- ...les conceptions et collaborerez avec des équipes en Europe et au Canada pour assurer la conformité et l’intégration des solutions de contrôle de vol sur l’A220. Le poste exige une expérience significative, des connaissances réglementaires (TCCA/FAA/EASA) et une maîtrise du MBSE...
- Senior Engineering Professional - Flight Control Law Design and Analysis - FBW When applicable, Bombardier promotes flexible and hybrid work policies. Why join us?At Bombardier, we design, build and maintain the world’s peak-performing aircraft for the world’s most discerning...WorldwideFlexible hoursShift work
- Technical Expert, Engineering, Fly-By-Wire and Secondary Flight Control System When applicable, Bombardier promotes flexible and hybrid work policies.Why join us? At Bombardier, we design, build and maintain the world’s peak-performing aircraft for the world’s most discerning...WorldwideFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Flight Controls Engineer. Be the first to apply!
Related searches
- process controls engineer Winnipeg, MB
- instrumentation and controls engineer Winnipeg, MB
- electrical controls engineer Winnipeg, MB
- controls engineer Winnipeg, MB
- industrial automation process control engineer Winnipeg, MB
- technicien instrumentation et contrôle Winnipeg, MB
- project control remote Winnipeg, MB
- automation engineer - process controls systems Winnipeg, MB
- control and automation engineer Winnipeg, MB
- project control analyst Winnipeg, MB

