C-Commissioning Process Lead
$65 - $72 per hourGrizzlyTrek Group
C-Commissioning Process Lead
$65.00 to $72.00 per hour | Sherwood Park, AB | 12 Month ContractCommissioning and Startup / Power Generation | 4th Class Power Engineer | 40 Hours per WeekGrizzlyTrek is hiring a Commissioning Operator for the power block on our valued client's major capital energy project in Sherwood Park, Alberta. You will help take three gas turbine generators and a steam turbine generator from construction walkdowns through first roll, synchronization and full load. This is a 12 month contract starting October 19, 2026, at 40 hours per week.A Power Engineer certificate, 4th Class or higher, is required.At a Glance
Pay:
$65.00 to $72.00 per hourType:
Contract, October 19, 2026 to October 18, 2027Hours:
40 hours per weekLocation:
Sherwood Park, Alberta. Project field based.Per Diem:
None. This is a local role.Reports To:
Power Block Commissioning CoordinatorEquipment:
Three gas turbine generators (GTGs), HRSGs, and one steam turbine generator (STG)Ticket:
Power Engineer certificate, 4th Class or higher (required)The Site
This is a new-build power block: three gas turbine generators, heat recovery steam generators (HRSGs), and a steam turbine generator with its condenser and cooling water systems. The job is to get all of it safely energized, tested and brought to full production capacity. Expect significant hands-on field work alongside vendors, subcontractors and the project engineering team: walkdowns, isolations, troubleshooting, and verifying system performance against design specifications.Your First 3 Months
Get up to speed on the power block commissioning and startup plans with your Commissioning Coordinator, including the System Commissioning Packages and proceduresComplete the CSU Operator Training Material and Competency Validation for the power blockComplete the site Safety Work Permit (SWP) training. It is extensive, but the principles line up with other Alberta industrial sitesWhat You'll Do
Support Construction Complete (CC) and Mechanically Complete (MC) walkdownsInstall energy isolations and issue Safety Work Permits (SWPs) as requiredOversee chemical cleaning and flushing of the HRSGs and lube oil systemsPerform cold and hot commissioning, functional testing and trial runs of the GTGsCommission the STG condenser and cooling water systems, and support STG steam line blowing, initial roll and heat up, overspeed testing, synchronization and load progressionSupport GTG and STG reliability testing, plus electrical testing of the excitation systems, static frequency converters and generatorsWork with vendors, subcontractors and project engineering under your CSU Coordinator's direction to execute commissioning and startup procedures, and provide daily progress reportsRedline site operating procedures, mentor less experienced team members, and help train Operations personnelWhat You Bring
Power Engineer certificate, 4th Class or higherStrong understanding of GTG and/or STG operationReady for significant hands-on field work: troubleshooting equipment and verifying system performance against design specificationsNice to Have
3 to 5 years of hands-on operator experience with gas turbine generators and/or steam turbine generatorsCommissioning and startup experience on GTGs or STGs (highly preferred)Why Power Engineers Take This Job
Few operators get to take a power block from walkdown to full load. This seat puts you on three gas turbine generators and a steam turbine generator through cleaning and flushing, first roll, overspeed testing, synchronization and reliability testing: the commissioning line that sets a resume apart. It pays $65.00 to $72.00 per hour for a full 12 month contract, and it is local work in Sherwood Park.Benefits
A full 12 month contract at 40 hours per weekLife insurance plus AD&D with critical illness and cancer coverageExtended health: drugs, hospital, hearing, orthotics, vision, and paramedical including mental healthDental coverage, including orthodontic coverage for childrenTravel insurance up to $5,000,000 per incidentOngoing training and career development supportAbout GrizzlyTrek
GrizzlyTrek Group is a Technical Workforce and Indigenous Employment Partner. We recruit skilled trades and technical professionals across Canada's industrial sector and place them with reputable employers offering long term work, fair pay, and room to advance. We welcome applications from all qualified candidates and proudly support Indigenous employment.
#J-18808-Ljbffr
$65.00 to $72.00 per hour | Sherwood Park, AB | 12 Month ContractCommissioning and Startup / Power Generation | 4th Class Power Engineer | 40 Hours per WeekGrizzlyTrek is hiring a Commissioning Operator for the power block on our valued client's major capital energy project in Sherwood Park, Alberta. You will help take three gas turbine generators and a steam turbine generator from construction walkdowns through first roll, synchronization and full load. This is a 12 month contract starting October 19, 2026, at 40 hours per week.A Power Engineer certificate, 4th Class or higher, is required.At a Glance
Pay:
$65.00 to $72.00 per hourType:
Contract, October 19, 2026 to October 18, 2027Hours:
40 hours per weekLocation:
Sherwood Park, Alberta. Project field based.Per Diem:
None. This is a local role.Reports To:
Power Block Commissioning CoordinatorEquipment:
Three gas turbine generators (GTGs), HRSGs, and one steam turbine generator (STG)Ticket:
Power Engineer certificate, 4th Class or higher (required)The Site
This is a new-build power block: three gas turbine generators, heat recovery steam generators (HRSGs), and a steam turbine generator with its condenser and cooling water systems. The job is to get all of it safely energized, tested and brought to full production capacity. Expect significant hands-on field work alongside vendors, subcontractors and the project engineering team: walkdowns, isolations, troubleshooting, and verifying system performance against design specifications.Your First 3 Months
Get up to speed on the power block commissioning and startup plans with your Commissioning Coordinator, including the System Commissioning Packages and proceduresComplete the CSU Operator Training Material and Competency Validation for the power blockComplete the site Safety Work Permit (SWP) training. It is extensive, but the principles line up with other Alberta industrial sitesWhat You'll Do
Support Construction Complete (CC) and Mechanically Complete (MC) walkdownsInstall energy isolations and issue Safety Work Permits (SWPs) as requiredOversee chemical cleaning and flushing of the HRSGs and lube oil systemsPerform cold and hot commissioning, functional testing and trial runs of the GTGsCommission the STG condenser and cooling water systems, and support STG steam line blowing, initial roll and heat up, overspeed testing, synchronization and load progressionSupport GTG and STG reliability testing, plus electrical testing of the excitation systems, static frequency converters and generatorsWork with vendors, subcontractors and project engineering under your CSU Coordinator's direction to execute commissioning and startup procedures, and provide daily progress reportsRedline site operating procedures, mentor less experienced team members, and help train Operations personnelWhat You Bring
Power Engineer certificate, 4th Class or higherStrong understanding of GTG and/or STG operationReady for significant hands-on field work: troubleshooting equipment and verifying system performance against design specificationsNice to Have
3 to 5 years of hands-on operator experience with gas turbine generators and/or steam turbine generatorsCommissioning and startup experience on GTGs or STGs (highly preferred)Why Power Engineers Take This Job
Few operators get to take a power block from walkdown to full load. This seat puts you on three gas turbine generators and a steam turbine generator through cleaning and flushing, first roll, overspeed testing, synchronization and reliability testing: the commissioning line that sets a resume apart. It pays $65.00 to $72.00 per hour for a full 12 month contract, and it is local work in Sherwood Park.Benefits
A full 12 month contract at 40 hours per weekLife insurance plus AD&D with critical illness and cancer coverageExtended health: drugs, hospital, hearing, orthotics, vision, and paramedical including mental healthDental coverage, including orthodontic coverage for childrenTravel insurance up to $5,000,000 per incidentOngoing training and career development supportAbout GrizzlyTrek
GrizzlyTrek Group is a Technical Workforce and Indigenous Employment Partner. We recruit skilled trades and technical professionals across Canada's industrial sector and place them with reputable employers offering long term work, fair pay, and room to advance. We welcome applications from all qualified candidates and proudly support Indigenous employment.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the C-Commissioning Process Lead in Winnipeg, MB vacancy
$80 per hour
...interviewed this week.GrizzlyTrek is hiring a Commissioning Electrical Lead for our valued client's commissioning... ...is resolved, within the Completions process, the Punchlist and Mitigation Plan and... ..., complete check sheets (A, B and C checks), write detailed technical reports...SuggestedHourly payLong term contractFor contractors$80 per hour
...are being interviewed this week.GrizzlyTrek is hiring a Commissioning Electrical Heat Trace (EHT) Lead for our valued client's commissioning and startup (CSU)... ...for the CSU CoordinatorUnderstand the Completions process, identify system scoping requirements and priorities, take...SuggestedHourly payLong term contractFor contractors- Job Title: C-Commissioning Operator – HPU Primary ResponsibilitiesReporting to the Commissioning Coordinator for the HPU, the HPU Commissioning... ...to permitting work, energy isolation (LOTO) and Basic Safety Process (BSP) requirements. Act as a Safety Ambassador, planning...SuggestedLong term contractFor contractorsFor subcontractorWork at officeShift work
- Job Title: C-Commissioning Operator (Power Block) Primary Responsibilities Under the direction... ...(CMS) tool, including the Punch List process and the CSU System Handover Management... ...Operations and the Craft Discipline Leads. Help resolve issues in the field, such...SuggestedLong term contractTemporary workFor contractorsNight shift
- Job Title: C-Commissioning Permitting & LOTO OperatorPrimary Responsibilities Responsible... ...issued SWPs. Complete the “Basic Safety Process” (BSP) forms as audits are conducted.SIMOPS... ...Operations work experience; 5 years leading commissioning and start-up activities....SuggestedOngoing contractLong term contractWork at office
- Victoria, CanadaTechnical Lead - Commissioning (Permanent)Your RoleWhat You Do Here MattersIn a complex world marked by the threat of war, natural... ...Science Technologist (AScT), Certified Engineering Technologist (C.E.T) or Professional Engineer (PEng) with the applicable...Permanent employment
- ...generations to come! The Testing and Commissioning - SCADA Lead will be a key member of the Rail and Systems... ..., testing, commissioning (T&C), and post-construction activities until... ...documents, administer the Aconex review process, and package documents for submission to...For subcontractorWorldwide
- ...are currently seeking a Construction & Commissioning Lead to join our Project Execution Team in Voisey... ...Harbour, we operate a state‑of‑the‑art processing plant, which refines nickel concentrate... ...available throughout our recruitment process for applicants with disabilities....Permanent employmentFor contractorsRemote workRelocationLong distance
- ...recruiting on behalf of our client for an experienced Commissioning Instrumentation Lead to support a major industrial project in Edmonton, Alberta... ...use AI tools to assist in a fair and efficient matching process, helping our recruiters connect the right people with the...Contract work
- ...is supporting our client in finding an experienced Electrical Commissioning Lead to support a major industrial project in Edmonton, AB.This is... ...activities.System Completion & DocumentationUnderstand the completions process, identify system scoping requirements and establish...For contractorsInternship
$110k - $140k per year
...Interactive, a Keywords Studio, is an industry-leading game development studio founded in 2007 by... ...players every day. Job OverviewAs a Lead Programmer at Smoking Gun Interactive (SGI... ...computer-based systems; Develop data, process and network models to optimize...Long term contractCasual workRemote workWorldwide- ...energy, chemicals and resources needed now. PURPOSE The Lead Process Engineer provides technical leadership and project delivery... ..., FEED, detailed design, procurement, construction, and commissioning.Ensure project scope is clearly defined and manage changes in...Local area
- ...resources needed now. PurposeWe are currently recruiting for a Lead Process Engineer (SAGD) to join our team of world-class experts and... ...early studies through detailed engineering, construction, commissioning, and start-up. The Lead Process Engineer will be responsible...Full time
$160k - $200k per year
..., and industrial sectors. We're looking for an experienced Lead Process Engineer to join our Toronto office, bringing strong technical... ...METSIM, SysCAD or Aspen Plus. Field experience in construction, commissioning or plant operations would be an asset, along with a...InternshipWork at officeWorldwide$121k - $148.3k per year
...Mining and Geology team is seeking a Lead Mineral Processing Engineer to contribute to every mining... ...phase, from prefeasibility studies to commissioning. Members of our multidisciplinary team... ...their expertise, carry out high-tech process simulations and determine the equipment...Work at officeLocal areaWork from homeFlexible hours- Ready to Take the Lead?Lead Process Engineer – CANUSA EPC CanadaLocation: Calgary, Alberta | Full-Time CANUSA EPC is looking for an experienced... .... Conduct site visits and field walkdowns. Support commissioning, startup, troubleshooting, and operational improvement...Full timeWork at office
$150k - $180k per year
Sedgman is seeking an experienced and motivated Lead Process Engineer, Mining & Minerals to join our growing team in Vancouver, BC. As... ...from early-stage development studies through detailed design, commissioning, and operational support. You will serve as a key technical authority...InternshipWork at office- Lead Commissioning Engineer / Commissioning ManagerPHASOR Engineering Inc. is a dynamic Alberta based company specializing in engineering, design... ...challenged in all aspects of the testing and commissioning process. Responsibilities Leading a team in the testing and commissioning...Full timeWork at officeFlexible hoursShift work
- ...capability for Canada. We're looking for a Manufacturing and Process Lead to champion the fit out, deployment, qualification, control, and... ...demanding environments. Experience establishing and commissioning tooling and advanced manufacturing capability. Deep working...Long term contractInternship
- Overview Lead, Process Safety role at NexGen Energy Ltd. The Process Safety Lead is accountable for establishing and sustaining Process... ...ROOK I project through engineering excellence, construction, commissioning, and operational readiness. This position reports directly to...Work at office
$175k - $245k per year
...specializing in engineering, design, and testing / commissioning of medium to high voltage electrical... ...a highly motivated Commissioning Lead join our field services team on a full... ...aspects of the testing and commissioning process. As a condition of employment, successful...Full timeWork at officeFlexible hoursShift work- ...for generations to come!The Testing and Commissioning Lead - Traction Power will be a key member of... ...construction, testing, commissioning (T&C), and post-construction activities until... ...Interfaces Strong understanding of V&V processes, systems assurance, safety assurance,...For contractorsFor subcontractorWorldwide
$88.8k - $118.4k per year
...Workplace Type: Onsite Ingredion is seeking a results-driven Process Lead, Wet Mill to support and oversee Wet Mill and Starch House... ...for the Ingredion Annual Incentive Plan or a role-specific commission/bonus. Benefits: Full-time roles are eligible for our...Long term contractFull timeWorldwideRelocationFlexible hours- Shape Canada’s defense capabilities as the Lead Commissioning Manager at Babcock in Victoria, BC. Utilize your engineering expertise to oversee complex submarine systems testing. This permanent role involves managing a team of engineers and technologists focused on testing...Permanent employment
- Lead instrumentation commissioning in Edmonton, Alberta, using field leadership and testing expertise on a major industrial project.Aplin is recruiting an experienced Commissioning Instrumentation Lead for a contract assignment in Edmonton. This Level IV position supports an...Contract work
$95k - $110k per year
...Aircraft Mechanic AME M2 (C-17) Company: Boeing Canada Operations Ltd Boeing Canada Operations... ...work directly under the guidance of the Lead Technician and report directly to the... ...Company’s Conflict of Interest (COI) assessment process. Additional Information: This...RemplacementFull timeContract workRelocationRelocation packageShift work- Overview AtkinsRéalis is seeking a Process Team Lead to join our Industrial and Process Engineering practice in Toronto, Ontario. In this... ..., concept development, detailed design, implementation, commissioning support, and operational improvement. Lead or review process...Contract workInternshipFlexible hours
$95k - $110k per year
...Aircraft Structures Technician (C-17) Company: Boeing Canada Operations Ltd Boeing Canada... ...work directly under the guidance of the Lead Structure Technician and report directly to... ...Company’s Conflict of Interest (COI) assessment process. Additional Information: This requisition...Contract workWork at officeRemote workRelocationRelocation packageShift work- About the Role We're looking for a Quality & Process Lead to own quality strategy and engineering process across our teams. You'll bring in the tooling (like SonarQube), set the standards, and track the metrics that tell us whether we're actually improving — while working...
- Dilawri Group of Companies is seeking a Finance & Insurance Manager for Thorncrest Ford in Toronto. The role focuses on selling after-sales products such as extended warranties and insurance, while coordinating deliveries and document preparation for final customer handover...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to C-Commissioning Process Lead. Be the first to apply!

