Turbomachinery Designer - Draftsperson
Canada Rocket Company
About this positionAbout Canada Rocket Company
Canada Rocket Company is developing Canada’s first medium-lift launch vehicle.
We are a team of veterans from SpaceX, Blue Origin, Rocket Lab, ArianeGroup, Pangea Propulsion, Tesla, MDA, and more, bringing over a century of combined launch and space systems experience back to Canada.
Our mission is to provide reliable, independent access to space for Canada and its allies in a rapidly expanding global market.
Our approach is defined by pragmatic engineering: We utilize a single 725kN engine that scales from light to medium-lift via engine clustering. We lean on simple, proven technologies to reach orbit faster, avoiding the pitfalls of complex or novel designs. We test early and often, catching problems on the bench instead of at the pad.
About Canada Rocket Company
Canada Rocket Company is developing Canada’s first medium-lift launch vehicle.
We are a team of veterans from SpaceX, Blue Origin, Rocket Lab, ArianeGroup, Pangea Propulsion, Tesla, MDA, and more, bringing over a century of combined launch and space systems experience back to Canada.
Our mission is to provide reliable, independent access to space for Canada and its allies in a rapidly expanding global market.
Our approach is defined by pragmatic engineering: We utilize a single 725kN engine that scales from light to medium-lift via engine clustering. We lean on simple, proven technologies to reach orbit faster, avoiding the pitfalls of complex or novel designs. We test early and often, catching problems on the bench instead of at the pad.
Backed by $20M in funding secured within our first four months, including the largest all‑Canadian seed round in the sector and an $8.3M Department of National Defence grant, we are moving with the speed and institutional backing required to meet Canada’s orbital launch needs.
About the role
Canada Rocket Company is building the turbomachinery that drives our 725kN engine. We’re looking for a Turbomachinery Designer - Draftsman to take preliminary designs from our mechanical engineers and turn them into release‑ready hardware definition. You’ll own the 3D models, 2D drawings, GD&T schemes, and stack‑ups for pumps, turbines, and the rotating assemblies that operate at the limit of what materials and manufacturing can deliver.
This is a hands‑on, high‑ownership seat.You’llsit between design, analysis, manufacturing, quality, and our supply base deciding what the drawingactually says, what getstolerancedwhere, and how the part will be inspected when it lands at the dock. At most companies, drafting is a downstream function. Here, your drawings are the contract between design intent and the hardware that ends up on the test stand.
What you’ll do
Build and maintain detailed 3D CAD models and full assemblies for turbopump hardware: pumps, turbines, housings, impellers, shafts, seals, bearings, manifolds, and the volutes and ducting that tie them together.
Author and release production 2D drawings end‑to‑end datums, GD&T per ISO GPS, surface finish, heat treatment, coatings, and inspection callouts at a level that lets a machine shop quote and cut without a back‑and‑forth.
Run tolerance stack‑ups and define the fits, clearances, and interface controls that keep rotating assemblies functional through cryogenic startup, hot‑side operation, and thermal transients.
Push back on design intent where it makes sense: flag features that are expensive, slow, or risky to manufacture, and propose CAD changes that pull cost and lead time out of the part.
Cover the full process spread CNC, additive, EDM, grinding, balancing, brazing/welding.
Drive parts through the PLM release cycle (Teamcenter or equivalent): part numbering, revisions, EBOM structure, and ECO documentation, so configuration is never in doubt.
Work directly with suppliers and our internal shop on RFIs, first‑article inspection, CMM and metrology plans, and nonconformity dispositioning. The drawing must be inspectable, not just drawable.
Own the drafting standard: templates, checking routines, title blocks, and review practice. Be the GD&T focal in design reviews and hold the line on drawing quality across the program.
QualificationsRequired
Technical degree in mechanical design, product design, industrial drafting, or equivalent practical background.
A formal engineering degree is not required, demonstrated drafting depth is. 9+ years releasing detailed drawings for precision mechanical hardware in aerospace, turbomachinery, motorsport, energy, or another high‑performance or regulated industry.
Direct hands‑on experience manufacturing and testing turbopump hardware time on the shop floor during builds and on the stand during cold‑flow, spin, or hot‑fire campaigns.
You’veseen how your drawings hold up when the parts come back from the vendor and when the assembly gets torn down post‑test.
Advanced CAD proficiency, ideally Siemens NX, with real fluency in detail design, large assemblies, and drawing generation.
Deep working knowledge of ISO GPS / GD&T and datum strategy, with a track record of producing drawings that inspectors and machinists don’t need to interpret.
Comfort running tolerance stack‑ups, defining fits and clearances, and managing the interfaces that determine whether an assembly works.
Ability to ingest analysis outputs FEA on rotor and stator assemblies, rotordynamic results, manufacturing tolerance studies and translate them into concrete drawing requirements: datum strategy, GD&T callouts, fits, run‑out and concentricity targets, and inspection criteria.
Practical understanding of how parts get made CNC turning and milling, additive, EDM, grinding and how DfM/DfA decisions ripple through cost, schedule, and yield.
Working command of PLM/PDM (Teamcenter preferred): revision control, release workflows, and engineering change.
Comfortable building process where it doesn’t exist yet.
Preferred
Formal GD&T / ISO GPS, metrology, or drafting certification.
Hands‑on experience detailing rotating equipment or high‑precision hardware and embedded with machine shops and inspectors during the build.
Direct experience with CMM and metrology workflows: GD&T verification, first‑article inspection, and nonconformity review.
Working knowledge of bearing and seal fits, runout and concentricity targets, and balance‑driven drawing requirements.
Familiarity with the materials, heat treatments, coatings, and surface finishes used on cryogenic and hot‑section turbomachinery.
Prior exposure to aerospace configuration control and traceability for flight or test hardware.
Experience producing assembly drawings, exploded views, and integration/test work instructions used on the floor.
#J-18808-Ljbffr
Canada Rocket Company is developing Canada’s first medium-lift launch vehicle.
We are a team of veterans from SpaceX, Blue Origin, Rocket Lab, ArianeGroup, Pangea Propulsion, Tesla, MDA, and more, bringing over a century of combined launch and space systems experience back to Canada.
Our mission is to provide reliable, independent access to space for Canada and its allies in a rapidly expanding global market.
Our approach is defined by pragmatic engineering: We utilize a single 725kN engine that scales from light to medium-lift via engine clustering. We lean on simple, proven technologies to reach orbit faster, avoiding the pitfalls of complex or novel designs. We test early and often, catching problems on the bench instead of at the pad.
About Canada Rocket Company
Canada Rocket Company is developing Canada’s first medium-lift launch vehicle.
We are a team of veterans from SpaceX, Blue Origin, Rocket Lab, ArianeGroup, Pangea Propulsion, Tesla, MDA, and more, bringing over a century of combined launch and space systems experience back to Canada.
Our mission is to provide reliable, independent access to space for Canada and its allies in a rapidly expanding global market.
Our approach is defined by pragmatic engineering: We utilize a single 725kN engine that scales from light to medium-lift via engine clustering. We lean on simple, proven technologies to reach orbit faster, avoiding the pitfalls of complex or novel designs. We test early and often, catching problems on the bench instead of at the pad.
Backed by $20M in funding secured within our first four months, including the largest all‑Canadian seed round in the sector and an $8.3M Department of National Defence grant, we are moving with the speed and institutional backing required to meet Canada’s orbital launch needs.
About the role
Canada Rocket Company is building the turbomachinery that drives our 725kN engine. We’re looking for a Turbomachinery Designer - Draftsman to take preliminary designs from our mechanical engineers and turn them into release‑ready hardware definition. You’ll own the 3D models, 2D drawings, GD&T schemes, and stack‑ups for pumps, turbines, and the rotating assemblies that operate at the limit of what materials and manufacturing can deliver.
This is a hands‑on, high‑ownership seat.You’llsit between design, analysis, manufacturing, quality, and our supply base deciding what the drawingactually says, what getstolerancedwhere, and how the part will be inspected when it lands at the dock. At most companies, drafting is a downstream function. Here, your drawings are the contract between design intent and the hardware that ends up on the test stand.
What you’ll do
Build and maintain detailed 3D CAD models and full assemblies for turbopump hardware: pumps, turbines, housings, impellers, shafts, seals, bearings, manifolds, and the volutes and ducting that tie them together.
Author and release production 2D drawings end‑to‑end datums, GD&T per ISO GPS, surface finish, heat treatment, coatings, and inspection callouts at a level that lets a machine shop quote and cut without a back‑and‑forth.
Run tolerance stack‑ups and define the fits, clearances, and interface controls that keep rotating assemblies functional through cryogenic startup, hot‑side operation, and thermal transients.
Push back on design intent where it makes sense: flag features that are expensive, slow, or risky to manufacture, and propose CAD changes that pull cost and lead time out of the part.
Cover the full process spread CNC, additive, EDM, grinding, balancing, brazing/welding.
Drive parts through the PLM release cycle (Teamcenter or equivalent): part numbering, revisions, EBOM structure, and ECO documentation, so configuration is never in doubt.
Work directly with suppliers and our internal shop on RFIs, first‑article inspection, CMM and metrology plans, and nonconformity dispositioning. The drawing must be inspectable, not just drawable.
Own the drafting standard: templates, checking routines, title blocks, and review practice. Be the GD&T focal in design reviews and hold the line on drawing quality across the program.
QualificationsRequired
Technical degree in mechanical design, product design, industrial drafting, or equivalent practical background.
A formal engineering degree is not required, demonstrated drafting depth is. 9+ years releasing detailed drawings for precision mechanical hardware in aerospace, turbomachinery, motorsport, energy, or another high‑performance or regulated industry.
Direct hands‑on experience manufacturing and testing turbopump hardware time on the shop floor during builds and on the stand during cold‑flow, spin, or hot‑fire campaigns.
You’veseen how your drawings hold up when the parts come back from the vendor and when the assembly gets torn down post‑test.
Advanced CAD proficiency, ideally Siemens NX, with real fluency in detail design, large assemblies, and drawing generation.
Deep working knowledge of ISO GPS / GD&T and datum strategy, with a track record of producing drawings that inspectors and machinists don’t need to interpret.
Comfort running tolerance stack‑ups, defining fits and clearances, and managing the interfaces that determine whether an assembly works.
Ability to ingest analysis outputs FEA on rotor and stator assemblies, rotordynamic results, manufacturing tolerance studies and translate them into concrete drawing requirements: datum strategy, GD&T callouts, fits, run‑out and concentricity targets, and inspection criteria.
Practical understanding of how parts get made CNC turning and milling, additive, EDM, grinding and how DfM/DfA decisions ripple through cost, schedule, and yield.
Working command of PLM/PDM (Teamcenter preferred): revision control, release workflows, and engineering change.
Comfortable building process where it doesn’t exist yet.
Preferred
Formal GD&T / ISO GPS, metrology, or drafting certification.
Hands‑on experience detailing rotating equipment or high‑precision hardware and embedded with machine shops and inspectors during the build.
Direct experience with CMM and metrology workflows: GD&T verification, first‑article inspection, and nonconformity review.
Working knowledge of bearing and seal fits, runout and concentricity targets, and balance‑driven drawing requirements.
Familiarity with the materials, heat treatments, coatings, and surface finishes used on cryogenic and hot‑section turbomachinery.
Prior exposure to aerospace configuration control and traceability for flight or test hardware.
Experience producing assembly drawings, exploded views, and integration/test work instructions used on the floor.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Turbomachinery Designer - Draftsperson in Winnipeg, MB vacancy
- ...structural interface drawings, and mechanical details for maintenance and capital projects. Interpreting engineering calculations, design specifications, sketches, and technical documentation to develop accurate designs and drawings. Collaborating with engineers, maintenance...SuggestedFull timeFor contractorsWork at office
- ...90 worked days of probation) Your roleWould you like to contribute to the reliability and safety of our infrastructure? As a Design Draftsperson, Inspection – Electrical, you will actively participate in the planning, design, and inspection of electrical projects that are...SuggestedPermanent employmentFor contractorsTrial period
- Canada Rocket Company is seeking a Turbomachinery Designer – Draftsman to lead drafting for our turbopump hardware. You will own 3D models, 2D drawings, GD&T schemes, and stack‑ups, coordinating with design, analysis, manufacturing, and suppliers. You will shape the drafting...Suggested
- ...the SGT-A35 gas turbine as a central member of the mechanical design team delivering to both R&D project, cost reduction projects and... ...Requirements if based out of Canada About The Team Our SGT-A35 Turbomachinery team consists of a 20-person team consisting of Team Leads,...SuggestedDaily paidRemote workFlexible hours
$75k - $95k per year
...NordSpaceis driven to bring space closer to Earth and inspire generations of space explorers. Role purpose: As a Turbomachinery Engineer you will design, analyze, and develop turbopumps and related rotating machinery for liquid rocket engines. You'll work on components...SuggestedFull timeInternship$70k - $90k per year
...Glazing and Quest Windows have helped shape North America’s most iconic skylines. From Toronto to Texas, we are vertically integrated to design, engineer, manufacture and install the complete building envelope with today’s most ambitious developers. Serving both residential and...Work at officeWork from home- ...at ENMAX, we're lighting the way together. As a Computer Draftsperson you'll play a key part in supporting Distribution projects through... ...collaborate across disciplines to support a variety of utility design initiatives. This is a great opportunity to contribute to...Work at officeWork from homeMonday to fridayFlexible hours
- ...private jets and residences. From sales and project planning to the design and manufacture of high-end interiors, our focus is always on... ...re a good fit if you.... have a technical education, senior draftsperson, and possess experience as a woodworker or have a master...WorldwideFlexible hours
- ...your career with Worley as a Specialist Mechanical Engineer in Turbomachinery, based in Edmonton, Alberta. You will provide expert technical... ...and SME for turbomachinery • Provide technical governance for design, procurement, and troubleshooting • Lead approval of engineering...
- ...Are you a skilled CAD Draftsperson with proven expertise in both AutoCAD 2D and 3D modeling? Do you excel at converting design specifications into precise manufacturing documents with efficiency? Join Teknion Custom Solutions, a leading wood office furniture manufacturer in...Work at office
- Job Description - Specialist Mechanical Engineer - Turbomachinery (CAL01QU) Specialist Mechanical Engineer - Turbomachinery - CAL01QU Company... ...lines. Provide technical governance and assurance for the design, specification, procurement, installation, commissioning, and...RemplacementLong term contractImmediate start
- ...role focuses on AutoCAD and Solidworks for creating detailed manufacturing documents. As a CAD Draftsperson, you will collaborate with the Engineering team to translate design specifications into precise production drawings. Your expertise in 2D and 3D modeling will ensure...
- Elevate your career as an AutoCAD Mechanical Draftsperson at Millar Western in Whitecourt, Alberta. This position involves creating precise... ...and technical documentation will be key to delivering accurate designs. Your experience in the industrial sector will enhance project...
- ...documentation. Liaise across engineering, production, and management to ensure estimates reflect real costs and achievable timelines. Maintain drawing and document control standards. Have Any Questions on Estimator Draftsperson Positions Or the Hiring Process? #J-18808-Ljbffr
- Explore a unique role at NordSpace as a Turbomachinery Engineer based in Markham, ON. Focus on designing sophisticated turbopumps for state-of-the-art liquid rocket... ...full-time position involves detailed analysis and design of turbopumps while engaging in all project phases...Full time
- ...reliability, affordability and sustainability.Join us. Connect to what matters.The Opportunity Reporting to the Manager of the Turbomachinery Category Team, the Category Specialist will manage an original equipment manufacturer (OEM) portfolio and related repair and overhaul...RemplacementLong term contractContract work
- Craft exceptional residential interior designs at F/LIST CANADA, a leader in high-quality interiors for jets and residences. This role... ...construction and Autocad expertise. F/LIST CANADA is seeking a skilled Draftsperson with a passion for craftsmanship and innovation. You will...
- Job Description The Senior Account Manager for Turbomachinery control (CCC) will exhibit genuine interest in solving work problems through proactively asking questions, clearly communicating and collaborating both internally and externally to grow the business. In addition...Contract workInternshipWork at office
- Turbomachinery procurement specialists manage OEM sourcing, supplier relationships, and commercial strategies across Canada, the United States, and Mexico. This role combines analysis with hands-on fleet support.At TC Energy, the Category Specialist manages gas turbine, power...Contract work
- ...firm is seeking a Hydro Mechanical Engineer to join their team in Calgary, Alberta. This position involves responsibility for mechanical design and commissioning of hydro turbines and associated systems. The ideal candidate will have strong design expertise, experience with...Remote work
- Turbomachinery controls expertise leads this Senior Account Manager role at Honeywell Technologies, serving customers across the Canadian territory. Travel 50% nationally, occasionally reaching the USA.Reporting to the Sales Manager – Americas, you will manage strategic accounts...
- ...drafting in Niagara Falls, Ontario, producing detailed drawings, take-offs, and fabrication documents. Work with BVGlazing Systems.As a Draftsperson, you will support commercial curtain wall and fenestration projects for BV Glazing and Quest Windows. Your work includes system...Work at office
- Worley is seeking a Specialist Mechanical Engineer - Turbomachinery to lead technical governance across capital projects. Candidates should have extensive experience in high-speed rotating equipment and be recognized as a technical authority in turbomachinery. The role includes...Full time
$70k - $90k per year
# Mechanical Draftsperson Temiskaming Shores, Canada · Full-time · MidApply on Dayforce Boart Longyear is a global leader in drilling services... ...and geometric dimensioning and tolerancing.* Complete detailed designs and specifications, including 3D modeling, drawing creation and...Long term contractPermanent employmentFull timeContract workWork at officeWorldwide$57.06k - $68.47k per year
...diversity, both within the organization and in its work with the community. We are currently recruiting for the role of Graphic Designer (1 Position - Permanent & Full-Time) Our Values Trust Generosity Equity Transformation Responsiveness Our Core...Permanent employmentFull timeFreelanceInternshipWork at office- ...Must have/use own personal private computer Job Title: Design Architect Summary of Scope of Work and ResponsibilitiesGeneral... ...involves: Directing and checking the work of Technologist, Design Draftspersons, and any other support staff assigned; Gathering information...Contract workWork at office
- ...opportunities is our passion, and you’re invited to be a part of that. • Our convenient Price Café offers free Tea and Coffee. Electrical Designer Reports To: Engineering Manager – Fan Coils Position Summary The Electrical Designer is responsible for the design,...
$90k - $110k per year
...We're looking for a Product Designer to take on the digital work at the core of ONBOX. Someone who can move fluidly between designing apps, crafting standout websites, and thinking in systems. You'll bring strong creative craft to ambitious digital projects, with the ability...Contract workMonday to friday- ...opportunities is our passion, and you’re invited to be a part of that. • Our convenient Price Café offers free Tea and Coffee. Mechanical Designer Reports To: Engineering Manager – Fan Coils Position Summary The Mechanical Product Designer is responsible for the design,...Work at office
- ...supporting health, charities, youth, and education opportunities is our passion, and you’re invited to be a part of that. Embedded Systems Designer – Antec Controls We are looking for an embedded systems designer who is technically inclined, who thrives on new challenges, and...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Turbomachinery Designer - Draftsperson. Be the first to apply!
Related searches

