Manufacturing And Process Lead
Canada Rocket Company
About this positionAbout Canada Rocket Company
About Canada Rocket Company
Canada Rocket Company is developing Canada's first medium-lift launch vehicle.
We are a team of veterans from SpaceX, Blue Origin, Rocket Lab, ArianeGroup, Pangea Propulsion, Tesla, MDA, and more, bringing over a century of combined launch and space systems experience back to Canada.
Our mission is to provide reliable, independent access to space for Canada and its allies in a rapidly expanding global market.
Our approach is defined by pragmatic engineering:
We utilize a 725 kN engine that scales medium-lift via engine clustering.
We lean on simple, proven technologies to reach orbit faster, avoiding the pitfalls of complex or novel designs.
We test early and often, catching problems on the bench instead of at the pad.
Backed by over $20M in funding secured within our first four months, including the largest all-Canadian seed round in the sector and an $8.3M Department of National Defence grant, we are moving with the speed and institutional backing required to meet Canada’s orbital launch needs.
About the role
Canada Rocket Company is building a sovereign launch capability for Canada. We're looking for a Manufacturing and Process Lead to champion the fit out, deployment, qualification, control, and industrialization fabrication processes that turn our vehicle designs into reliable, flight-ready hardware.
Alongside growing the manufacturing and process teams, you will work across structures, propulsion, fluids, integration teams, and executive teams to define and deploy CRC’s manufacturing approach. You will drive the development of the machine that builds the machine, further solidifying supply base partnerships and deploying in-house capability that allows us to build our vehicles at rate. You will additionally guide the selection and qualification of materials, fabrication methods, and process controls, leading the resolution of real-world manufacturing challenge s.
What you'll do
Define and own CRC's overall manufacturing and process strategy spanning material selection philosophy, fabrication method selection, in-house vs. outsourced capability, and industrialization roadmap
Decide where CRC builds in-house capability versus deploys and manages supply-base partnerships, and drive the capital and hiring plans needed to support that
Set the standards and gates for material and process qualification, and hold the team and suppliers accountable to them
Own the make-vs-buy and supplier strategy for critical raw materials, forgings, and fabricated components;
guide supplier selection, qualification, and long-term relationship management in partnership with supply chain and operations
Set direction for manufacturing documentation systems (specs, travelers, work instructions, build sequences) and ensure the team builds and maintains them to a consistent, auditable standard
Establish CRC's approach to non-conformances, rework, process escapes, and failure analysis;
building the investigation process and escalation structure, and personally leading resolution of the highest-severity issues
Represent manufacturing and materials in technical reviews, trade studies, program planning, and executive-level discussions on hardware risk, schedule, and production scaling
Work with structural and mechanical engineers to define and execute the material and manufacturing engineering approach for launch-vehicle hardware, spanning material selection, process development, fabrication planning, producibility, industrialization, and build support
Define, develop, optimize, and control fabrication processes for hardware
Drive design-for-manufacture and design-for-assembly reviews with engineering teams
Partner closely with design, structures, propulsion, fluids, and integration teams to ensure hardware concepts are aligned with real process capability, source availability, and production constraints. Ensure Production capability remains ahead of design need.
Contribute to technical reviews, trade studies, and development planning related to materials, manufacturing methods, production scaling, and hardware risk reduction
Qualifications
Required
Experience in leading or building manufacturing engineering, materials engineering, or process engineering function for aerospace hardware or similarly demanding environments.
Experience establishing and commissioning tooling and advanced manufacturing capability.
Deep working knowledge of metallic material systems and fabrication processes. (machining, welding, forming, joining, heat treatment), and experience utilizing that knowledge to make decisions impacting performance, manufacturability, durability, and cost.
Experience developing, utilizing, supporting, or optimizing fabrication processes for hardware
Strong understanding of the interaction between materials and manufacturing methods, especially where fabrication route directly affects strength, fatigue performance, distortion, residual stress, crack initiation, dimensional control, or inspectability.
Experience creating and managing manufacturing documentation, process flows, work instructions, build plans, or fabrication sequences.
Strong engineering fundamentals related to material behavior, manufacturing process capability, producibility, and practical hardware realization.
Strong cross-functional leadership;
able to align design engineering, production, operations, suppliers, and executive stakeholders being a manufacturing strategy.
Comfort operating with significant ambiguity and limited infrastructure
Strong communication and technical judgment, with the ability to make sound decisions that balance performance, manufacturability, schedule, scalability, and cost
Preferred
Direct experience with launch vehicle, spacecraft, propulsion, pressure vessel, tank, thrust structure, manifold, or other high-performance aerospace hardware.
Experience standing up or scaling a manufacturing/materials organization from early stage through rate production
Experience with both additive manufacturing processes and traditional machining and joining methods
Experience with source qualification and supplier development for metallic raw material and fabrication processes.
Familiarity with NDT/NDE methods relevant to metallic and composite hardware
Familiarity with AS9100, NASA, ECSS, or similar aerospace process and manufacturing environments.
Bachelor's or advanced degree in materials engineering, mechanical engineering, manufacturing engineering, aerospace engineering, or a related field.
#J-18808-Ljbffr
About Canada Rocket Company
Canada Rocket Company is developing Canada's first medium-lift launch vehicle.
We are a team of veterans from SpaceX, Blue Origin, Rocket Lab, ArianeGroup, Pangea Propulsion, Tesla, MDA, and more, bringing over a century of combined launch and space systems experience back to Canada.
Our mission is to provide reliable, independent access to space for Canada and its allies in a rapidly expanding global market.
Our approach is defined by pragmatic engineering:
We utilize a 725 kN engine that scales medium-lift via engine clustering.
We lean on simple, proven technologies to reach orbit faster, avoiding the pitfalls of complex or novel designs.
We test early and often, catching problems on the bench instead of at the pad.
Backed by over $20M in funding secured within our first four months, including the largest all-Canadian seed round in the sector and an $8.3M Department of National Defence grant, we are moving with the speed and institutional backing required to meet Canada’s orbital launch needs.
About the role
Canada Rocket Company is building a sovereign launch capability for Canada. We're looking for a Manufacturing and Process Lead to champion the fit out, deployment, qualification, control, and industrialization fabrication processes that turn our vehicle designs into reliable, flight-ready hardware.
Alongside growing the manufacturing and process teams, you will work across structures, propulsion, fluids, integration teams, and executive teams to define and deploy CRC’s manufacturing approach. You will drive the development of the machine that builds the machine, further solidifying supply base partnerships and deploying in-house capability that allows us to build our vehicles at rate. You will additionally guide the selection and qualification of materials, fabrication methods, and process controls, leading the resolution of real-world manufacturing challenge s.
What you'll do
Define and own CRC's overall manufacturing and process strategy spanning material selection philosophy, fabrication method selection, in-house vs. outsourced capability, and industrialization roadmap
Decide where CRC builds in-house capability versus deploys and manages supply-base partnerships, and drive the capital and hiring plans needed to support that
Set the standards and gates for material and process qualification, and hold the team and suppliers accountable to them
Own the make-vs-buy and supplier strategy for critical raw materials, forgings, and fabricated components;
guide supplier selection, qualification, and long-term relationship management in partnership with supply chain and operations
Set direction for manufacturing documentation systems (specs, travelers, work instructions, build sequences) and ensure the team builds and maintains them to a consistent, auditable standard
Establish CRC's approach to non-conformances, rework, process escapes, and failure analysis;
building the investigation process and escalation structure, and personally leading resolution of the highest-severity issues
Represent manufacturing and materials in technical reviews, trade studies, program planning, and executive-level discussions on hardware risk, schedule, and production scaling
Work with structural and mechanical engineers to define and execute the material and manufacturing engineering approach for launch-vehicle hardware, spanning material selection, process development, fabrication planning, producibility, industrialization, and build support
Define, develop, optimize, and control fabrication processes for hardware
Drive design-for-manufacture and design-for-assembly reviews with engineering teams
Partner closely with design, structures, propulsion, fluids, and integration teams to ensure hardware concepts are aligned with real process capability, source availability, and production constraints. Ensure Production capability remains ahead of design need.
Contribute to technical reviews, trade studies, and development planning related to materials, manufacturing methods, production scaling, and hardware risk reduction
Qualifications
Required
Experience in leading or building manufacturing engineering, materials engineering, or process engineering function for aerospace hardware or similarly demanding environments.
Experience establishing and commissioning tooling and advanced manufacturing capability.
Deep working knowledge of metallic material systems and fabrication processes. (machining, welding, forming, joining, heat treatment), and experience utilizing that knowledge to make decisions impacting performance, manufacturability, durability, and cost.
Experience developing, utilizing, supporting, or optimizing fabrication processes for hardware
Strong understanding of the interaction between materials and manufacturing methods, especially where fabrication route directly affects strength, fatigue performance, distortion, residual stress, crack initiation, dimensional control, or inspectability.
Experience creating and managing manufacturing documentation, process flows, work instructions, build plans, or fabrication sequences.
Strong engineering fundamentals related to material behavior, manufacturing process capability, producibility, and practical hardware realization.
Strong cross-functional leadership;
able to align design engineering, production, operations, suppliers, and executive stakeholders being a manufacturing strategy.
Comfort operating with significant ambiguity and limited infrastructure
Strong communication and technical judgment, with the ability to make sound decisions that balance performance, manufacturability, schedule, scalability, and cost
Preferred
Direct experience with launch vehicle, spacecraft, propulsion, pressure vessel, tank, thrust structure, manifold, or other high-performance aerospace hardware.
Experience standing up or scaling a manufacturing/materials organization from early stage through rate production
Experience with both additive manufacturing processes and traditional machining and joining methods
Experience with source qualification and supplier development for metallic raw material and fabrication processes.
Familiarity with NDT/NDE methods relevant to metallic and composite hardware
Familiarity with AS9100, NASA, ECSS, or similar aerospace process and manufacturing environments.
Bachelor's or advanced degree in materials engineering, mechanical engineering, manufacturing engineering, aerospace engineering, or a related field.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Manufacturing And Process Lead in Winnipeg, MB vacancy
- ...Team is seeking a highly technical and process-oriented Manufacturing Process Engineer to manage the full... ...responsible for two primary pillars: leading the successful launch of New Product Introductions... ...and Responsibilities Lead the industrialization strategy for new...Suggested
- Lead electronics manufacturing process engineering in Markham, focusing on NPI launches, process optimization, and scalable assembly systems. Drive production readiness through technical leadership.GE Vernova seeks a highly technical Manufacturing Process Engineer for its Markham...Suggested
- Manufacturing process planning and PLM knowledge anchor this Technical Lead assignment, including MBOM, BOP, and work instruction flows.The consultant reviews functional behavior across an existing Teamcenter Easy Plan implementation. Responsibilities include validating manufacturing...Suggested
- Price Industries Limited, a leader in air distribution products, seeks a Quality/Process Improvement professional for its Winnipeg facility. You will analyze quality... ..., and data visualization with Excel and Power BI, supporting sustained manufacturing excellence. #J-18808-LjbffrSuggested
- Lead New Product Introduction industrialization in Markham, applying assembly process engineering and Lean expertise across manufacturing operations.This Manufacturing Process Engineer leads NPI launches and continuous improvement for existing production lines. The work covers...Suggested
- Lead factory quality at Mondelēz International through food safety, process capability, and problem-solving expertise. Work onsite Monday to Friday.As Process Quality Lead... ...activitiesCoordinate quality workloads across manufacturing floor specialistsExecute root-cause analysis...Monday to friday
- ...Price Industries Limited, North America’s leading manufacturer and distributor of air distribution... ...follow-up service have made Price a market leader in supplying air distribution, critical... ...solutions, and strategic-level process improvements • Coordinate and manage...For contractorsWork at office
- ...Cosma International in Mississauga is seeking an engineering leader to drive cross‑functional projects for body, chassis and engineering solutions. You will lead initiatives from concept to rollout, coordinating design, tooling, budgeting and capital approvals while collaborating...
- Lead manufacturing process optimization at IPEX’s Scarborough, Ontario plant using production analysis, lean manufacturing, and root cause analysis expertise.The Process Manager ensures safe, efficient, and cost-effective production processes. Reporting to the Plant Manager,...
$75k - $85k per year
..., Triple-Bottom Line company, we proudly manufacture nutritious, 'better-for-you' snacks such... ...Position Summary/Objective The Manufacturing Process Engineering Specialist will be... ...requirements related to production processes.Lead and coach supervisors, technicians, and operators...Long term contractWork at officeShift work$80k - $95k per year
Join Our Team as a Manufacturing Process Specialist at Johnson Electric!Location: Mississauga, ON (onsite)Salary Range: $ 80,000-95,000 annuallyVacancy... ...requiredAs our next Manufacturing Process Specialist, you’ll lead the development and continuous improvement of assembly...InternshipFlexible hoursShift workWeekend work$85k - $110k per year
...packaged. The Role We are seeking a Manufacturing Process Engineer to join our Manufacturing... ...turns a great design into a reliably manufacturable product. You are a detailed and hands... ...the Hardware Engineering team and lead the transition from prototype to first...Full timeFor contractorsCasual workWork at officeFlexible hoursShift workAfternoon shiftEarly shift- Lean manufacturing and process optimization define this Process Engineer role at Sigma-Omega Corporation in Toronto. Improve flow, quality, safety... ...develops, implements, and optimizes production processes. The role leads continuous improvement, material flow, pull systems,...
- The Corporate Manufacturing/Process Engineer will support manufacturing operations across multiple facilities, focusing on equipment improvement,... ...process consistency, cycle time, quality, and throughput. Lead structured root-cause analysis and implement sustainable corrective...
- Manufacturing process optimization leads this Process Manager role at IPEX’s Scarborough, Ontario plant, with responsibility for safe, efficient operations. Analyze production data and improve performance across manufacturing processes.The Process Manager reports to the Plant...
- Design manufacturing processes and tooling with AVIRE in Sussex, Wisconsin, applying validation, troubleshooting, and continuous improvement expertise... ..., and optimized manufacturing flow.Key Responsibilities: Lead manufacturing input for prototype-to-production product...
- ...disabilities are available at all stages of the recruitment process upon request. Broccolini is a family-owned, single-source... ...Process & ManufacturingAt Broccolini, the Director of Process & Manufacturing will lead the full lifecycle of complex industrial, manufacturing, and...Contract workFor subcontractorInternship
- ...quality systems and technical problem-solving define this onsite Manufacturing Process Specialist opportunity at Johnson Electric in Mississauga, Ontario.As a Manufacturing Process Specialist, you will lead cross-functional implementation of new processes and improvements...
- Improve manufacturing performance through plant troubleshooting, equipment renewal, and capital project support as a Senior Plant Process Engineer. Collaborate directly with production and maintenance teams.This experienced engineer addresses process upsets and develops improvements...Remplacement
- Industrial Manufacturing Process Engineer focused on lean methodologies and process improvement across machine, fabrication, weld, assembly, paint, material handling, and automation operations.This engineer participates in developing and continuously improving manufacturing...
- Design automotive manufacturing processes using CAD/CAM, process analysis, and quality methods to support efficient production of high-quality components. Improve production systems through structured engineering and continuous improvement initiatives.The Manufacturing Engineer...
- Polymer manufacturing expertise meets process optimization in this on-site Chemical Process Engineer position in Kimberley, Northern Cape. Apply polymer chemistry and troubleshooting skills directly within plant operations.This Chemical Process Engineer role supports efficient...
- Manufacturing Engineer/Specialist supporting production through process improvement, technical documentation, and root-cause problem solving for large industrial equipment... ...teams.Kadant Carmanah Design designs and manufactures equipment for Engineered Wood products, including...
- Join Cosma International as a Manufacturing Process Engineer, focusing on the optimization of assembly processes and quality standards. Utilize your experience in advanced joining technologies and GD&T. As a Manufacturing Process Engineer, you will engage actively in analyzing...
- Automotive manufacturing process engineering combines equipment integration, data analysis, and continuous improvement across assigned work centers and programs. Travel may be required locally and internationally.This Process Engineer supports Multimatic teams through equipment...Permanent employmentWork at office
$70.75k - $165.98k per year
...Join us and help the world’s leading organizations unlock the value... ...PMO / Change & Transformation Lead to support the deployment of the... ...within a major aerospace manufacturing environment.The program aims to... ...accommodation during our recruitment process. If you need assistance or...Full timeLocal areaFlexible hours- Improve food manufacturing processes through GMP expertise and root cause analysis at Canada Royal Milk’s infant formula facility. Flexible hours may support continuous operations.This Operation and Process Engineer collaborates with production, engineering, maintenance, and...Flexible hours
- Drive lean manufacturing, 5S, and process performance at IPEX’s Scarborough, Ontario manufacturing plant. This full-time Process Manager role reports to the Plant Manager.You will evaluate current procedures and implement sustainable improvements across manufacturing operations...Full time
- MiTek seeks a Manufacturing Engineer II to improve production processes, quality, and machine-building support in Calgary. The role is fully on-site.Working within MiTek’s Manufacturing Engineering and Operations team, you will guide design and production personnel while maintaining...
- Shape mill performance through process studies, chemical trials, and operational leadership at Marcal Paper in St. Catharines, Ontario.This Process Engineer role provides direct leadership across hourly operations and supports improvement efforts involving multiple disciplines...Hourly pay
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Manufacturing And Process Lead. Be the first to apply!
Related searches
- manufacturing and production Winnipeg, MB
- welding fabrication Winnipeg, MB
- steel fabrication Winnipeg, MB
- fabrication supervisor Winnipeg, MB
- manufacturing work from home Winnipeg, MB
- industrial and manufacturing engineer Winnipeg, MB
- manufacturing night shift Winnipeg, MB
- fabrication mecanique Winnipeg, MB
- manufacturing and production
- apprenticeship fabrication

