Intermediate Protection & Controls Engineer
®
We rise to the biggest challenges because we demand excellence. Our teams are always learning and challenging the status quo because we know if we are going to succeed in creating a cleaner future, we must think differently.
Our Integrated Design team collaborates across our Energy & Resources markets, including renewables, power delivery, oil and gas, mining, and more. We work on projects that are as challenging as they are impactful.
We combine the strength of a large company with the agility of specialized teams, allowing us to be our best as we deliver projects that are transforming our communities.
Join an Integrated Design team that is working to deliver innovative solutions on projects around the world.
OpportunityOur Power Delivery team has an exciting opportunity for an Intermediate Protection & Control (P&C) Engineer to join the team. This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design of high voltage substation and power projects.
The successful candidate will be working in the areas of substations, renewable energy, air & gas insulated substation engineering equipment at different voltage levels. The candidate should understand substation and power system protection schemes as they relate to the design of protection and control systems.
Key ResponsibilitiesYou will work within a multidisciplinary team of design and engineering professionals to deliver substation protection and control projects. As an intermediate engineer, you will be responsible for supporting and executing the complete assigned P&C design tasks from planning through post-construction, with guidance and technical review from senior engineers.
You will apply your engineering knowledge and judgment to develop protection and control designs for substations and transmission facilities. Your work will include preparing drawings, calculations, relay settings, technical specifications, and construction packages, and supporting field investigations, testing, and commissioning. You will coordinate assigned work with other disciplines and clients, manage your deliverables against project schedules and budgets, and seek senior engineering guidance for complex protection applications and technical decisions.
Key responsibilities include:
Prepare P&C engineering drawings and calculations for substation and power system applications in accordance with client standards and applicable codes, standards, and regulatory requirementsPrepare technical reports that clearly communicate engineering concepts and meet client requirementsCoordinate with multidisciplinary teams, clients, vendors for project execution and resolution of technical issuesProvide regular progress updates on assigned deliverables and project milestonesInterface with team members and provide support and coordination to facilitate effective project executionPerform self-checks and assigned peer checks within your areas of competence, address review comments, and support senior engineers in completing project QA/QC reviews
Capabilities and CredentialsExperience preparing protection and control designs for substations, with senior engineering review, including:- One-line and three-line diagramsAC & DC schematicsWiring and interconnection diagramsCable schedule and sizingStation service drawings and schematicsControl house layoutBills of MaterialWorking knowledge of protection applications for transmission lines, transformers, buses, and breakers, including instrument transformer selection, breaker failure protection, and trip and close circuits. Ability to assist with protection philosophies, short-circuit and coordination studies, relay settings, and control logic under senior engineering guidance.Preparation of P&C engineering design documentation, including technical specifications, equipment datasheets, basis of design and bills of materialComplete conceptual protection and control designs and layouts for new and existing substation facilities.Identify technical issues, develop practical solutions, and escalat??Assist with proposal inputs, level-of-effort estimates, construction bid documents, technical bid evaluations, and equipment specifications for assigned P&C scope.Provide construction and commissioning support, including coordination with clients, contractors, utilities, and equipment vendorsExperience with microprocessor-based protective relays and associated configuration software;
familiarity with short-circuit and relay coordination software and CAD-based drawing workflows. Familiarity with SCADA interfaces, protection communications, and IEC 61850 applications is an asset.
Education and ExperienceBachelor’s degree in electrical engineering.Engineer-in-Training (EIT) certification or progress toward Professional Engineer (PE) licensure is preferred;
PE licensure in a U.S or Peng in Canada jurisdiction is an asset.5-8 years of relevant substation protection and control engineering experience.
Office Location and ScheduleTypical office environment, working with computers and drawings for long periods of time. Field work may include exposure to hazards including construction, weather, and industrial operations that may be experienced at the infrastructure facilities.Stantec offers flexible work environment. While our preference is for the successful candidate to work from the office at least two days per week, we are open to discussing other work arrangements.Field work may include exposure to elements including inclement weather.Location – Burnaby, Calgary, Toronto, Fredericton, St. Johns
#J-18808-Ljbffr
Our Integrated Design team collaborates across our Energy & Resources markets, including renewables, power delivery, oil and gas, mining, and more. We work on projects that are as challenging as they are impactful.
We combine the strength of a large company with the agility of specialized teams, allowing us to be our best as we deliver projects that are transforming our communities.
Join an Integrated Design team that is working to deliver innovative solutions on projects around the world.
OpportunityOur Power Delivery team has an exciting opportunity for an Intermediate Protection & Control (P&C) Engineer to join the team. This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design of high voltage substation and power projects.
The successful candidate will be working in the areas of substations, renewable energy, air & gas insulated substation engineering equipment at different voltage levels. The candidate should understand substation and power system protection schemes as they relate to the design of protection and control systems.
Key ResponsibilitiesYou will work within a multidisciplinary team of design and engineering professionals to deliver substation protection and control projects. As an intermediate engineer, you will be responsible for supporting and executing the complete assigned P&C design tasks from planning through post-construction, with guidance and technical review from senior engineers.
You will apply your engineering knowledge and judgment to develop protection and control designs for substations and transmission facilities. Your work will include preparing drawings, calculations, relay settings, technical specifications, and construction packages, and supporting field investigations, testing, and commissioning. You will coordinate assigned work with other disciplines and clients, manage your deliverables against project schedules and budgets, and seek senior engineering guidance for complex protection applications and technical decisions.
Key responsibilities include:
Prepare P&C engineering drawings and calculations for substation and power system applications in accordance with client standards and applicable codes, standards, and regulatory requirementsPrepare technical reports that clearly communicate engineering concepts and meet client requirementsCoordinate with multidisciplinary teams, clients, vendors for project execution and resolution of technical issuesProvide regular progress updates on assigned deliverables and project milestonesInterface with team members and provide support and coordination to facilitate effective project executionPerform self-checks and assigned peer checks within your areas of competence, address review comments, and support senior engineers in completing project QA/QC reviews
Capabilities and CredentialsExperience preparing protection and control designs for substations, with senior engineering review, including:- One-line and three-line diagramsAC & DC schematicsWiring and interconnection diagramsCable schedule and sizingStation service drawings and schematicsControl house layoutBills of MaterialWorking knowledge of protection applications for transmission lines, transformers, buses, and breakers, including instrument transformer selection, breaker failure protection, and trip and close circuits. Ability to assist with protection philosophies, short-circuit and coordination studies, relay settings, and control logic under senior engineering guidance.Preparation of P&C engineering design documentation, including technical specifications, equipment datasheets, basis of design and bills of materialComplete conceptual protection and control designs and layouts for new and existing substation facilities.Identify technical issues, develop practical solutions, and escalat??Assist with proposal inputs, level-of-effort estimates, construction bid documents, technical bid evaluations, and equipment specifications for assigned P&C scope.Provide construction and commissioning support, including coordination with clients, contractors, utilities, and equipment vendorsExperience with microprocessor-based protective relays and associated configuration software;
familiarity with short-circuit and relay coordination software and CAD-based drawing workflows. Familiarity with SCADA interfaces, protection communications, and IEC 61850 applications is an asset.
Education and ExperienceBachelor’s degree in electrical engineering.Engineer-in-Training (EIT) certification or progress toward Professional Engineer (PE) licensure is preferred;
PE licensure in a U.S or Peng in Canada jurisdiction is an asset.5-8 years of relevant substation protection and control engineering experience.
Office Location and ScheduleTypical office environment, working with computers and drawings for long periods of time. Field work may include exposure to hazards including construction, weather, and industrial operations that may be experienced at the infrastructure facilities.Stantec offers flexible work environment. While our preference is for the successful candidate to work from the office at least two days per week, we are open to discussing other work arrangements.Field work may include exposure to elements including inclement weather.Location – Burnaby, Calgary, Toronto, Fredericton, St. Johns
#J-18808-Ljbffr
Vacancy posted 23 minutes ago
Similar jobs that could be interesting for youBased on the Intermediate Protection & Controls Engineer in Winnipeg, MB vacancy
$81.9k - $118.8k per year
...solutions on projects around the world. Opportunity Our Power Delivery team has an exciting opportunity for an Intermediate Protection & Control (P&C) Engineer to join the team. This position offers you the opportunity to work in a project team environment with other...SuggestedLong term contractFull timeTemporary workPart timeFor contractorsCasual workWork at officeFlexible hours2 days per week- Advance your career at CIMA+ as an Intermediate Protection and Control Engineer, where you'll design and review electrical systems for renewable energy projects. Enjoy a flexible, innovative work environment in Western Canada. CIMA+ is seeking an experienced engineer with...SuggestedFlexible hours
- ...high-voltage substations with Stantec using protection systems, relay settings, and detailed electrical engineering expertise. Flexible arrangements are available across Canadian offices.As an Intermediate Protection and Control Engineer, you will support multidisciplinary...SuggestedFlexible hours
- Design high-voltage substation protection systems with Stantec using relay settings, engineering calculations, and flexible office arrangements. Work from... ...Toronto, Fredericton, or St. John’s.As an Intermediate Protection and Control Engineer, you will support detailed...SuggestedFor contractorsWork at officeFlexible hours
- Design high-voltage substation protection systems with Stantec’s Power Delivery team in... ...flexible work environment across Canada.This intermediate engineering role supports detailed electrical... .... You will prepare protection and control documentation while collaborating with...SuggestedFlexible hours
$78.45 per hour
Project Engineer – Protection & Control (P&C) Centric Projects Pay Rate: $78.45/hour, depending on experience Contract: Start Date 2026-12-01End... ..., and industry-standard design and analysis software. Intermediate proficiency in Microsoft Office applications, including...Contract workFor contractorsWork at officeMonday to friday- At Hitachi Energy, we are driving the future of power systems through innovation and sustainability. As a Protection & Control Engineer, you will design and implement advanced protection and control systems that keep the grid safe, reliable, and ready for the energy transition...
- ...Description Overview Our Engineering Services team in Winnipeg is... ...marketplace, we are looking for an Intermediate Electrical Engineer to join... ..., security, and control/signal systems. Review, understand... ...”) are committed to protecting your privacy. Please consult...Full timeFor contractorsInternshipWork at officeLocal areaFlexible hours
- ...AtkinsRéalis. AtkinsRéalis is dedicated in engineering a better future for our planet and its... ..., project turn over, quality control and reporting. Understanding of stakeholder... ...throughout as “AtkinsRéalis”) are committed to protecting your privacy. Please consult our Privacy...For contractorsInternshipWork at officeFlexible hours
- ...Management Systems (PMS) and Power Plant Controllers (PPC) for data centers, power plants,... ..., enabling clients to validate control strategies, de-risk integration, and... ...RoleEdgeTunePower is seeking an experienced Senior Protection & Control Engineer to support the design, analysis,...
- Shape the future of energy with CIMA+ as a Senior Protection and Control Engineer. Focus on innovative solutions for large-scale electrical projects in a collaborative environment. CIMA+ is expanding, seeking a Senior Protection and Control Engineer to join our Energy & Resources...
- Power your future with Qualus as a Principal Protection and Control Engineer, to join our well-established Protection & Control team of engineers and designers in Canada, in our Transmission & Distribution Canada business. This role offers long-term workload stability, exposure...Long term contractTemporary workFlexible hours
- Drive your career forward with Qualus as a Principal Protection & Control Engineer in Canada. Lead complex high-voltage substation projects while mentoring engineers and maintaining technical excellence. This principal role in the Protection & Control team offers you the...
- Take the next step in your career as a Protection & Control Engineer with EdgeTunePower. This senior role emphasizes protecting modern power systems across diverse applications. At EdgeTunePower, the Protection & Control Engineer will play a critical role in the design and...
$68.2k - $98.9k per year
...Regardless of the energy sector, our multidisciplinary detailed engineering teams possess the expertise and experience required to... ...develop the most effective and cost-efficient solutions.As a Protection and Control Engineer, you will have the opportunity to contribute to the...Long term contractFull timeTemporary workPart timeCasual work- Electrical Protection and Controls EngineerSt. John's, NL, Canada Type of position: Regular Yourfuture role within our teamJoin BBA and... ...various project phases as a Protection and Controls (P&C) Design Engineer. You will be involved in the design of protection and...Long term contractTemporary workWork at officeLocal area
- Become an integral part of CIMA+ as a Protection and Control Engineer, focusing on innovative energy projects. Utilize your expertise in electrical systems within a collaborative and sustainable environment. Working with CIMA+, you will be involved in multidisciplinary teams...
- ...programming and commissioning of industrial control and HMI systems (DCS/PLC/SCADA/RTU).... ...asset. Understanding and development of engineering deliverables: P&IDs, Shutdown Keys,... ...sustainable future 35 years dedicated to protecting the environment: Steve Chevarie's story...Flexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Intermediate Protection & Controls Engineer. Be the first to apply!
Related searches
- process controls engineer Winnipeg, MB
- instrumentation and controls engineer Winnipeg, MB
- electrical controls engineer Winnipeg, MB
- controls engineer Winnipeg, MB
- industrial automation process control engineer Winnipeg, MB
- technicien instrumentation et contrôle Winnipeg, MB
- project control remote Winnipeg, MB
- automation engineer - process controls systems Winnipeg, MB
- control and automation engineer Winnipeg, MB
- project control analyst Winnipeg, MB

