Program Manager, Manufacturing & Npi
North Vector Dynamics Inc.
Who We AreNorth Vector Dynamics is a Canadian-owned and controlled defence technology company specializing in precision interception, autonomy, and advanced propulsion. NVD is building a full-spectrum missile capability, from counter-UAS solutions to hypersonics, designed to serve and defend NATO member states and their allies and partners.
About the RoleNorth Vector Dynamics is building next-generation defence systems, and the CM70 is moving from prototype builds to a controlled, repeatable production line in a new Calgary manufacturing facility. We’re looking for a Program Manager, Manufacturing & NPI to own the plan that gets our products from released design to delivered hardware, on time, at cost, and ready for rate.
What You’ll DoProgram & Schedule Management
Own the integrated manufacturing schedule for the CM70 and future products: build cycles, material readiness, test and demo articles, kinetic test units, and customer and government deliverables.
Translate customer commitments and engineering milestones into build plans with clear gates, owners, and dates, and keep them current as priorities shift.
Run the risk, issue, and hard-stops registers for manufacturing: surface the gating constraints across method, machine, material, and manpower early, and drive closure plans weekly.
Track program cost: unit build cost, bill-of-materials costing, budget versus actuals for manufacturing projects and capital, and the cost impact of design and supplier changes.
Set and run the manufacturing operating cadence: weekly build reviews, schedule and risk reporting to senior leadership, and clear status on what is on track, at risk, or blocked.
New Product Introduction (NPI)
Build and own a stage-gate NPI process that carries each product from prototype through pilot builds, low-rate initial production, and rate production, with defined entry and exit criteria at every gate.
Lead manufacturing readiness reviews against Manufacturing Readiness Levels (MRL), ensuring tooling, fixtures, work instructions, supply, quality plans, and training are ready before each gate.
Drive design-for-manufacturability (DFM) and design-for-test input into engineering reviews, and coordinate design freezes and baselines so production builds to a controlled configuration.
Coordinate engineering changes from design to the floor: impact assessment on schedule, cost, inventory, tooling, and work instructions, and orderly cut-in through the change control board.
Plan first article inspections and pilot builds with Quality and Manufacturing Engineering, and capture lessons learned into the next product’s NPI plan.
Support the planning for production transfer and expansion with allied partners, including future manufacturing in the EU.
Manufacturing Projects & Systems Deployments
Project-manage the stand-up of our new manufacturing facility: fit-out, equipment moves, commissioning, and the re-validation needed to restart production with minimal downtime.
Lead the project plan for our MES (Eyelit), ERP, and PLM/PDM rollouts with the Head of Manufacturing and IT: scope, vendor coordination, integration milestones, data migration, training, and go-live.
Coordinate the manufacturing workstreams of our AS9100 certification plan with the Quality lead, so compliance milestones are scheduled alongside production rather than competing with it.
Partner with Supply Chain on long-lead and critical parts, rolling purchase orders, second-source qualification, and shortage recovery plans that protect the build schedule.
Own manufacturing capital and equipment projects from business case through installation, including printer, automation, and test equipment decisions.
Stakeholders & Tools
Serve as the single point of coordination between Manufacturing, Systems Engineering, Supply Chain, Quality, Security, and the company-wide Project Manager, and keep everyone working from one plan.
Own our manufacturing planning and tracking tools, today in monday.Com and evolving into the ERP and MES, and build dashboards that make status obvious at a glance.
Prepare program updates and briefing material for senior leadership, customers, and government stakeholders.
Step into whatever the mission demands: this is a startup, no two weeks will look the same!
What You BringRequired
A bachelor’s degree (minimum) in engineering (manufacturing, mechanical, industrial, aerospace, or similar), or an equivalent technical discipline from an accredited program and institution.
5+ years of program or project management in a hardware manufacturing environment, with direct ownership of NPI, production ramps, or production programs from plan to delivery.
A track record building and running integrated schedules with real dependencies across engineering, supply chain, and production, and getting hardware out the door on time.
Experience running stage-gate or phase-gate product development or NPI processes, including readiness reviews and design-freeze discipline.
Working knowledge of engineering change control, bills of materials, and configuration management, and how changes ripple through cost, inventory, and the shop floor.
Strong command of planning tools (MS Project, Smartsheet, monday.Com, or similar) and of data: building and presenting schedule, cost, and risk metrics in Excel, Power BI, or similar tools to make an ambiguous problem clear.
Experience managing budgets and cost tracking for programs or capital projects.
Ability to read engineering drawings and bills of materials, and enough technical depth to challenge a plan with engineers and technicians.
Clear, direct communication with technicians, engineers, executives, suppliers, and customers, and the judgment to escalte early with options, not just problems.
Eligibility for a Government of Canada security clearance and registration under the Controlled Goods Program;
active clearance is a significant asset.
A builder’s mindset: you take ownership of the outcome, not just the schedule, and you’re as comfortable on the floor with a technician as you are in a leadership review.
Preferred
PMP, PgMP, or equivalent program management certification.
Experience in a UAS, aerospace, munitions, or defence manufacturing environment, ideally at a startup or scale-up moving from prototype to rate production.
Familiarity with Manufacturing Readiness Levels (MRL), APQP (AS9145), and AS9100 requirements for production planning, first article inspection, and configuration management.
Experience leading an ERP, MES, or PLM implementation, or a facility stand-up, relocation, or production line transfer.
Exposure to earned value management (EVM) and government or defence contract deliverables, including DND or allied program reporting.
Lean manufacturing or Six Sigma experience (Green Belt or higher), applied to production flow and line balancing.
Exposure to electromechanical assembly, additive manufacturing, PCBA, or energetics production.
P.Eng. or EIT designation, or eligibility for registration in Alberta or conversion from an eligible province.
Why North Vector Dynamics
Real ownership from day one: the systems and processes you help build will be foundational to how this company operates for years to come.
We’re working on technology that matters at a national and global level, and every person on the team feels that weight and that purpose.
A tight-knit, high-calibre team that moves fast, holds each other to a high standard, and doesn’t waste time on bureaucracy for its own sake.
Competitive compensation and meaningful upside from joining an early-stage company at the forefront of the defence technology sector.
On-site in Calgary, AB, a growing hub for tech and defence, with a culture built around resilience and getting things done.
#J-18808-Ljbffr
About the RoleNorth Vector Dynamics is building next-generation defence systems, and the CM70 is moving from prototype builds to a controlled, repeatable production line in a new Calgary manufacturing facility. We’re looking for a Program Manager, Manufacturing & NPI to own the plan that gets our products from released design to delivered hardware, on time, at cost, and ready for rate.
What You’ll DoProgram & Schedule Management
Own the integrated manufacturing schedule for the CM70 and future products: build cycles, material readiness, test and demo articles, kinetic test units, and customer and government deliverables.
Translate customer commitments and engineering milestones into build plans with clear gates, owners, and dates, and keep them current as priorities shift.
Run the risk, issue, and hard-stops registers for manufacturing: surface the gating constraints across method, machine, material, and manpower early, and drive closure plans weekly.
Track program cost: unit build cost, bill-of-materials costing, budget versus actuals for manufacturing projects and capital, and the cost impact of design and supplier changes.
Set and run the manufacturing operating cadence: weekly build reviews, schedule and risk reporting to senior leadership, and clear status on what is on track, at risk, or blocked.
New Product Introduction (NPI)
Build and own a stage-gate NPI process that carries each product from prototype through pilot builds, low-rate initial production, and rate production, with defined entry and exit criteria at every gate.
Lead manufacturing readiness reviews against Manufacturing Readiness Levels (MRL), ensuring tooling, fixtures, work instructions, supply, quality plans, and training are ready before each gate.
Drive design-for-manufacturability (DFM) and design-for-test input into engineering reviews, and coordinate design freezes and baselines so production builds to a controlled configuration.
Coordinate engineering changes from design to the floor: impact assessment on schedule, cost, inventory, tooling, and work instructions, and orderly cut-in through the change control board.
Plan first article inspections and pilot builds with Quality and Manufacturing Engineering, and capture lessons learned into the next product’s NPI plan.
Support the planning for production transfer and expansion with allied partners, including future manufacturing in the EU.
Manufacturing Projects & Systems Deployments
Project-manage the stand-up of our new manufacturing facility: fit-out, equipment moves, commissioning, and the re-validation needed to restart production with minimal downtime.
Lead the project plan for our MES (Eyelit), ERP, and PLM/PDM rollouts with the Head of Manufacturing and IT: scope, vendor coordination, integration milestones, data migration, training, and go-live.
Coordinate the manufacturing workstreams of our AS9100 certification plan with the Quality lead, so compliance milestones are scheduled alongside production rather than competing with it.
Partner with Supply Chain on long-lead and critical parts, rolling purchase orders, second-source qualification, and shortage recovery plans that protect the build schedule.
Own manufacturing capital and equipment projects from business case through installation, including printer, automation, and test equipment decisions.
Stakeholders & Tools
Serve as the single point of coordination between Manufacturing, Systems Engineering, Supply Chain, Quality, Security, and the company-wide Project Manager, and keep everyone working from one plan.
Own our manufacturing planning and tracking tools, today in monday.Com and evolving into the ERP and MES, and build dashboards that make status obvious at a glance.
Prepare program updates and briefing material for senior leadership, customers, and government stakeholders.
Step into whatever the mission demands: this is a startup, no two weeks will look the same!
What You BringRequired
A bachelor’s degree (minimum) in engineering (manufacturing, mechanical, industrial, aerospace, or similar), or an equivalent technical discipline from an accredited program and institution.
5+ years of program or project management in a hardware manufacturing environment, with direct ownership of NPI, production ramps, or production programs from plan to delivery.
A track record building and running integrated schedules with real dependencies across engineering, supply chain, and production, and getting hardware out the door on time.
Experience running stage-gate or phase-gate product development or NPI processes, including readiness reviews and design-freeze discipline.
Working knowledge of engineering change control, bills of materials, and configuration management, and how changes ripple through cost, inventory, and the shop floor.
Strong command of planning tools (MS Project, Smartsheet, monday.Com, or similar) and of data: building and presenting schedule, cost, and risk metrics in Excel, Power BI, or similar tools to make an ambiguous problem clear.
Experience managing budgets and cost tracking for programs or capital projects.
Ability to read engineering drawings and bills of materials, and enough technical depth to challenge a plan with engineers and technicians.
Clear, direct communication with technicians, engineers, executives, suppliers, and customers, and the judgment to escalte early with options, not just problems.
Eligibility for a Government of Canada security clearance and registration under the Controlled Goods Program;
active clearance is a significant asset.
A builder’s mindset: you take ownership of the outcome, not just the schedule, and you’re as comfortable on the floor with a technician as you are in a leadership review.
Preferred
PMP, PgMP, or equivalent program management certification.
Experience in a UAS, aerospace, munitions, or defence manufacturing environment, ideally at a startup or scale-up moving from prototype to rate production.
Familiarity with Manufacturing Readiness Levels (MRL), APQP (AS9145), and AS9100 requirements for production planning, first article inspection, and configuration management.
Experience leading an ERP, MES, or PLM implementation, or a facility stand-up, relocation, or production line transfer.
Exposure to earned value management (EVM) and government or defence contract deliverables, including DND or allied program reporting.
Lean manufacturing or Six Sigma experience (Green Belt or higher), applied to production flow and line balancing.
Exposure to electromechanical assembly, additive manufacturing, PCBA, or energetics production.
P.Eng. or EIT designation, or eligibility for registration in Alberta or conversion from an eligible province.
Why North Vector Dynamics
Real ownership from day one: the systems and processes you help build will be foundational to how this company operates for years to come.
We’re working on technology that matters at a national and global level, and every person on the team feels that weight and that purpose.
A tight-knit, high-calibre team that moves fast, holds each other to a high standard, and doesn’t waste time on bureaucracy for its own sake.
Competitive compensation and meaningful upside from joining an early-stage company at the forefront of the defence technology sector.
On-site in Calgary, AB, a growing hub for tech and defence, with a culture built around resilience and getting things done.
#J-18808-Ljbffr
Vacancy posted 47 minutes ago
Similar jobs that could be interesting for youBased on the Program Manager, Manufacturing & Npi in Winnipeg, MB vacancy
- North Vector Dynamics Inc. in Calgary, AB is seeking a Program Manager, Manufacturing & NPI to own the plan from released design to delivered hardware on time and at cost. You will lead integrated schedules across engineering, supply chain, and production, drive stage-gate NPI...Suggested
- Senex Recruitment Ltd is seeking an experienced Project Manager to own and steer complex new product development projects from development through to manufacture and launch. You will coordinate internal engineering teams and external partners, ensuring schedules, costs and...Suggested
- DarkVision in Vancouver is seeking a Manufacturing Manager to lead and scale the production of advanced ILI and downhole imaging technologies. You will own end-to-end manufacturing and repair scope, directing a team of technicians and collaborating with Field Ops, Supply Chain...Suggested
- Current Lighting Employee Co Llc, basé à Montréal, Québec, recherche un gestionnaire de programme pour piloter l’introduction de nouveaux luminaires LED et des contrôles intelligents à l’échelle Nord-Américaine. Vous dirigerez des équipes transversales, assurerez le respect ...Suggested
- ...DART Aerospace, we design, manufacture, and certify mission-critical... ...Senior New Product Introduction (NPI) Engineer to lead the... ...Contribute to certification programs involving TCCA, FAA, EASA,... ...Chain, Procurement, and Program Management. Provide hands-on engineering...SuggestedPermanent employmentFull time
- Lead hardware manufacturing readiness at Tenstorrent in a hybrid Toronto role, using NPI, failure analysis, and process engineering expertise.As a Staff Manufacturing Engineer, you will build in-house capabilities for prototype, EVT, DVT, and volume production. You will translate...Contract work
- ...assembly process engineering and Lean expertise across manufacturing operations.This Manufacturing Process Engineer leads NPI launches and continuous improvement for existing... ...assembly preferredComplex product structure management experience in SAP and MESIPC-A-610/620 standards...
- GCR Professional Services is seeking a Manufacturing Engineer to own and optimize manufacturing processes for assigned products in the Burlington... ..., and cost while providing technical leadership for NPI programs and automation initiatives. You will collaborate closely with...
- ...scaling electric vehicle tech company in Montreal, seeks a Vehicle Program Manager to steer new vehicle development from concept to SOP,... ...teams across engineering, tooling, supplier, certification, manufacturing and commercial milestones. You will own the New Product Introduction...
- Take on the role of Manufacturing Program Manager at BRP, where you'll lead project initiatives and ensure successful deliverables that meet business goals. Your leadership will enhance program excellence and team efficiency. As a key player at BRP, you will leverage your...
- Fluxwerx Illumination Inc. seeks a Manufacturing Engineering leader to drive NPI from concept to production ramp, optimize line design, and advance continuous... ...across the plant. You will mentor engineers, manage multiple projects, and ensure scalable, cost‑effective...
$80k - $95k per year
We are seeking a Program Manager to lead automotive tooling and manufacturing programs from launch through production. This role manages cross-functional automotive projects including tooling, engineering coordination, supplier management, and customer delivery. Salary:...- ...WhiteWater West in Richmond, BC, is seeking an experienced Manufacturing Engineer to provide technical manufacturing support across our global supply base. You will ensure safe, consistent production aligned with design and quality requirements across composites, steel, theming...
- Strengthen manufacturing operations through safety management systems, audit readiness, and practical floor guidance at VoltaGrid Manufacturing in Calgary.This Health and Safety Manager leads the facility program while maintaining a visible presence across manufacturing operations...
- ...and equipment, production systems and methods of work Plan and manage the establishment of departmental budget Computer and... ...benefits Other benefits Free parking available Wellness program Work Term: Permanent Work Language: English Hours: 40 hours...RemplacementPermanent employmentRemote workWork from homeRelocationHome officeShift work
- ...complex assemblies and systems solutions to aircraft and engine manufacturers, and defence and space agencies worldwide. At Magellan we... ...Magellan, you are part of the team! Position Summary The Program Manager acts as the key contact with the customer; ensuring that...Permanent employmentInternshipWork at officeLocal areaWorldwide
- ...SUMMARY We are seeking a Customer Programs Manager who will act as the liaison for the... ...with 5+ years of work experience in a manufacturing or customer-oriented environment.... ...Group is a leading independent global bus manufacturer providing a comprehensive suite of mass...Long term contractFull timeContract workSummer holiday
- ...MANUFACTURING ENGINEERING MANAGER Winnipeg, MB Full-Time and Onsite Carfair Composites is a leader in fibre-reinforced plastic design and... ..., AL, Wausaukee, WI, and Gillett, WI. As a comprehensive manufacturer of engineered composite products, Carfair Composites supplies...Long term contractFull timeInternshipWork at officeImmediate startMonday to friday
- ...Lead avionics project portfolios as an Engineering Program Management Analyst in Dorval, with flexible and hybrid work policies when applicable. Use analytical planning and leadership skills. Bombardier’s Avionics Program Management team seeks a results-driven analyst for...Flexible hours
- ...City plans, designs, operates and renews the mobility network.Reporting to the Director, Safe Mobility, the General Supervisor, Program Management leads two critical section-wide functions: Program Management and Planning & Monitoring. Together, these teams form a vital link...Permanent employmentSeasonal work
- ...Limited, North America’s leading manufacturer and distributor of air... ...counselling, consultations, and guided programs all in one place. Life and... ...operators, supervisors, managers, and design engineers •... ...improvements • Coordinate and manage manufacturing support...Work at office
$52.5k per year
...commercial, and infrastructure projects across the country. About the Program If you’re a new grad who wants more than a desk job — someone... ...your chance to build a real career from the ground up. Our Management Development Program is a hands-on, accelerated path that teaches...Full timeTraineeshipWork at officeRelocationRelocation package- ...Industries Limited, North America’s leading manufacturer and distributor of air distribution... ...book counselling, consultations, and guided programs all in one place. Life and Disability... ...finishing requirements. • Coordinate and manage manufacturing support projects, ensuring...For contractorsWork at officeRelocation
- ...Job Description Senior Manufacturing Engineer (Silent-Aire) Build your best future with the Johnson Controls team As a global leader... ...fabrication parts, consumables, task lists, and subassemblies; manage procurement‑related documentation and change management (ECRs)....Worldwide
$85k - $95k per year
...have: ~ Bachelor's degree or diploma in Manufacturing Engineering, Industrial Engineering,... ...Administration, Information Technology, Operations Management, or a related discipline. ~ Experience... ...operations and ERP transformation programs. Certifications such as APICS/ASCM...Permanent employment- ...Industries Limited, North America’s leading manufacturer and distributor of air distribution... ...counselling, consultations, and guided programs all in one place. Life and Disability... ...Reporting To: Manufacturing Engineering Manager Position Summary The Senior Manufacturing...
- ...Industries Limited, North America’s leading manufacturer and distributor of air distribution... ...Goals, Rewards, Improvement and Teamwork program qualifying teams can enjoy a monthly reward... ...employees, supervisors, engineers, and managers • Supporting data analytics...
- ...convenient options to book counselling, consultations, and guided programs all in one place. Life and Disability - You will be provided... ...is our passion, and you’re invited to be a part of that. Manufacturing Engineering Specialist – Antec Controls The position of Manufacturing...
- .... As North America's leading motorcoach manufacturer and a proud member of NFI Group, MCI combines... ...Enjoy vacation time, paid holidays, and programs that support team member well-being and... ...cost performance and operational risk management, including labour utilization, overtime,...Long term contractPermanent employmentFull timeImmediate startMonday to friday
- ...Who We Are: Price Industries Limited, North America’s leading manufacturer and distributor of air distribution products ( The founding... ..., Mechanical, Industrial, or Electrical Engineering/Technology program. • Comfortable with Microsoft Office (Excel, Word, PowerPoint...For contractorsWork at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Program Manager, Manufacturing & Npi. Be the first to apply!
Related searches
- recreation program coordinator Winnipeg, MB
- program coordinator Winnipeg, MB
- chargé de projet automatisation Winnipeg, MB
- wellness program coordinator Winnipeg, MB
- project program manager Winnipeg, MB
- program supervisor Winnipeg, MB
- community health program coordinator Winnipeg, MB
- coordinateur de projets Winnipeg, MB
- chargé de projet estimateur Winnipeg, MB
- responsable de projets Winnipeg, MB

