Level 2/3 Control Systems Engineer - Canada
LSI - Logical Systems Inc.
Control Systems Engineers analyze user requirements and the design of process and/or mechanical equipment to design automation systems that control the process or machine in the desired manner.
The engineer uses knowledge and experience in instrumentation, control valves, Motors/VFDs, control system electrical design, and PLC/DCS programming to deliver an automation system that meets the user’s needs utilizing the minimum essential design.
Control Systems Engineers Demonstrate
High integrity
A willingness to go beyond the ordinary to meet and exceed client expectations
A desire for continual challenge and development, and excellent written and verbal communication skills
Reports To:Operations Director
Job QualificationsRoles and responsibilities for this job may include but are not limited to:
Develop control specification (control narratives) documentation based on User Requirements
Participates in initial feasibility studies for proposed projects, resulting in a feasibility-level cost estimate and supporting documentation for the project
Mark‑up Process and Instrumentation Diagrams (P&IDs) for instrumentation and controls related changes and review drawings from the drafting team
Design low‑voltage (up to 480V) electrical controls drawings, panel drawings, loop sheets, I/O drawings, and network drawings and review drawings from the drafting team
Develop programs for Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC) and/or oversee the program development done by others
Human‑Machine Interface (HMI) development and SCADA configuration
Historian configuration
Execute testing plans for DCS and PLC programs to effectively test all aspects of a new program or program changes
Simulate the DCS/PLC program and test the system using the testing plan
Oversee electrical controls construction at the client’s site and verify that the system is being installed as designed – provide technical support to the construction effort
Perform I/O checkout on the installed control system and document the checkout results
Provide post‑commissioning support to the client’s operations, engineering, and maintenance personnel
Travel to the client’s site as required
Required Experience
Degreed in Engineering (Electrical, Mechanical, Chemical, or similar), Computer Science, or similar scientific / technical field
Ideal Experience
3-5 years of experience in a similar engineering role
At least 3-5 years’ experience with one or more of the following platforms:
Allen Bradley PLC5, SLC500, MicroLogix, ControlLogix
Siemens S7, PCS7
Emerson DeltaV, Ovation, Provox
Novatech D/3
Honeywell Experion
Foxboro I/A
HMI/SCADA configuration experience with one or more of the following platforms:
Allen Bradley / Rockwell Automation
Inductive Automation
Wonderware
Siemens
iFix
Iconics
Historian and/or data analytics experience with one or more of the following platforms:
OSIsoft PI
PTC Thingworx
Inductive Automation Ignition
Aspentech
Rockwell Automation
Siemens
Wonderware
Experience in the application of instrumentation, control valves, motors, VFDs and coordinated drive systems
Current working knowledge of the National Electric Code (NEC) with the ability to locate solutions to code questions
Certified professional engineer
Some experience in electrical design of Electrical Panels, I/O systems, Motor/VFD/Motion/Robotic Controls, and Ethernet-based networks
Field experience troubleshooting electrical controls problems in an industrial environment
Industry experience in Food and Beverage, Chemical, Pharma, Semiconductor, Water & Wastewater, Refining, Pulp and Paper, Oil/Gas Pipeline, Power Generation, Electrical Transmission & Distribution, Material Handling, or Packaging
#J-18808-Ljbffr
The engineer uses knowledge and experience in instrumentation, control valves, Motors/VFDs, control system electrical design, and PLC/DCS programming to deliver an automation system that meets the user’s needs utilizing the minimum essential design.
Control Systems Engineers Demonstrate
High integrity
A willingness to go beyond the ordinary to meet and exceed client expectations
A desire for continual challenge and development, and excellent written and verbal communication skills
Reports To:Operations Director
Job QualificationsRoles and responsibilities for this job may include but are not limited to:
Develop control specification (control narratives) documentation based on User Requirements
Participates in initial feasibility studies for proposed projects, resulting in a feasibility-level cost estimate and supporting documentation for the project
Mark‑up Process and Instrumentation Diagrams (P&IDs) for instrumentation and controls related changes and review drawings from the drafting team
Design low‑voltage (up to 480V) electrical controls drawings, panel drawings, loop sheets, I/O drawings, and network drawings and review drawings from the drafting team
Develop programs for Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC) and/or oversee the program development done by others
Human‑Machine Interface (HMI) development and SCADA configuration
Historian configuration
Execute testing plans for DCS and PLC programs to effectively test all aspects of a new program or program changes
Simulate the DCS/PLC program and test the system using the testing plan
Oversee electrical controls construction at the client’s site and verify that the system is being installed as designed – provide technical support to the construction effort
Perform I/O checkout on the installed control system and document the checkout results
Provide post‑commissioning support to the client’s operations, engineering, and maintenance personnel
Travel to the client’s site as required
Required Experience
Degreed in Engineering (Electrical, Mechanical, Chemical, or similar), Computer Science, or similar scientific / technical field
Ideal Experience
3-5 years of experience in a similar engineering role
At least 3-5 years’ experience with one or more of the following platforms:
Allen Bradley PLC5, SLC500, MicroLogix, ControlLogix
Siemens S7, PCS7
Emerson DeltaV, Ovation, Provox
Novatech D/3
Honeywell Experion
Foxboro I/A
HMI/SCADA configuration experience with one or more of the following platforms:
Allen Bradley / Rockwell Automation
Inductive Automation
Wonderware
Siemens
iFix
Iconics
Historian and/or data analytics experience with one or more of the following platforms:
OSIsoft PI
PTC Thingworx
Inductive Automation Ignition
Aspentech
Rockwell Automation
Siemens
Wonderware
Experience in the application of instrumentation, control valves, motors, VFDs and coordinated drive systems
Current working knowledge of the National Electric Code (NEC) with the ability to locate solutions to code questions
Certified professional engineer
Some experience in electrical design of Electrical Panels, I/O systems, Motor/VFD/Motion/Robotic Controls, and Ethernet-based networks
Field experience troubleshooting electrical controls problems in an industrial environment
Industry experience in Food and Beverage, Chemical, Pharma, Semiconductor, Water & Wastewater, Refining, Pulp and Paper, Oil/Gas Pipeline, Power Generation, Electrical Transmission & Distribution, Material Handling, or Packaging
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Level 2/3 Control Systems Engineer - Canada in Winnipeg, MB vacancy
- ...industry. Summary: The Consultant, ICT Systems Engineering at Epic is responsible for timely and... ...Services environment Professional level certification in any of the following: VCP... ...: Regular - Full Time Job Location: Canada : Manitoba : Winnipeg Work Arrangement...Level 3Full timeWork at officeRemote workFlexible hours3 days per week
$20 per hour
Hello! We're a family in Winnipeg, Manitoba searching for a reliable and caring nanny to join our household. If you're passionate about working with children and have experience, we'd love to hear from you. We're specifically looking for a Live Out nanny for a Part-time position...SuggestedHourly payPart timeLive outDay shift$30.89 per hour
...Level 3 Plumbing Apprentice – Winnipeg, MB $30.89/hour | Full-Time | Permanent We are seeking a Level 3 Plumbing Apprentice to join... ...Assist with the installation, maintenance, and repair of plumbing systems Read and interpret blueprints and construction drawings...Level 3Permanent employmentFull timeApprenticeship- ...predictable and stable work schedule and award-winning and one of Canada’s Most Admired Corporate Cultures with a proudly diverse and... ...ambitious and want to grow with Reliance • Registered Apprentice in Level 2 or 3 • Must have a driver’s license with clean driver’s abstract...Level 3Level 2Apprenticeship
$29.79 per hour
...Level 3 HVAC/R Apprentice – Winnipeg, MB $29.79/hour | Full-Time | Permanent We are currently seeking a Level 3 HVAC/R Apprentice... ...on a variety of commercial and industrial HVAC and refrigeration systems. Responsibilities Assist with the installation, maintenance...Level 3Permanent employmentFull timeFor contractorsApprenticeship- ...Overview Languages English Education Bachelor's degree Experience 2 years to less than 3 years Tasks Develop and implement child-care programs that support and promote the physical, cognitive, emotional and social development of children Supervise staff...Level 3Full timeTraineeship
- ...Overview Languages English Education Bachelor's degree Experience 2 years to less than 3 years Tasks Bathe, diaper and feed infants and toddlers Develop and implement child-care programs that support and promote the physical, cognitive, emotional and...Level 2Full timeTraineeshipLocal area
$20 - $25 per hour
...English Education ~ Bachelor's degree Experience 2 years to less than 3 years On site Work must be completed at the physical location... ..., memberships, and courses Child development worker (ECE level 2) First Aid Certificate CPR Certificate Experience...Level 2TraineeshipLocal areaRemote work- ...energy in North America, is looking for Apprentices. Apprentices level 1 and 2 are responsible for helping Journeymen and other employees with... ...Deciding on best routing options for conduit, wires, and other systems Assisting newer/fellow Apprentices with orientation and...Level 2Full timeApprenticeshipFlexible hours
$89.91k - $113.73k per year
The Engineering Service Business Unit focuses on power system software development, power system and substation consulting studies... ...an exciting opportunity for up to 2 Study Engineers to join our team... ...be considered. * At the senior level, at least 8 years of experience...Full timeImmediate startRemote work- ...time off. Work schedule is Monday - Friday 8:00 AM - 8:30 PM, with 2.5 hour scheduled breaks. Saturday is 8:00 AM - 1:00 PM with 30... ...and hold a valid driver's license *Ability to travel to and from US/Canada THIS ONE IS A MUST - START AND END THE DAY WITH A SMILE :) She is...Live InMonday to friday
- ...Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years,... ...convenient Price Café offers free Tea and Coffee. Finishing Systems Engineering Assistant (8 Month Term – Winter 2027) The successful candidate...For contractors
- ...Lead Legal Engineering from Legora’s Toronto office, combining legal practice, product... ...enterprise change leadership. Build Canada’s commercial and delivery engine. As Director, Legal Engineering,... ...Legora’s Canadian Legal Engineering system through hiring, leadership...Work at office
- ...our open positions. What do we look for in our nannies? - At least 2 years of childcare (infant to preteen) experience - Someone... ...Part-time/Evenings, Flexible River Heights, Winnipeg 2 children- 3.5 years and 1.5 years June 29, 2026 - June 25, 2027 Summer (July &...Part timeSummer workFlexible hoursWeekend workAfternoon shift
$16.8 per hour
...attendance -Fast paced environment -Entry level role with training provided... ...include job title in the subject line 2) Apply directly to this posting 3) Apply online at We thank all... ...interviews will be contacted. Randstad Canada is committed to fostering a workforce...Permanent employmentFull timeTemporary workManual laborFlexible hoursNight shiftRotating shiftAfternoon shift- ...: 20084590 Posting End Date: November 2, 2026 City: Winnipeg Site: Concordia... ...participate on a full-time basis during Level 1, 2, and 3 training periods. Education (Degree/Diploma... ...Workplace Hazardous Material Information System (WHMIS), Principles of Routine Practices...Level 3Level 2Full timeImmediate startShift workWeekend workAfternoon shift
- ...certification preferred. E1 Certification preferred. Wound Care level 1 & 2 certification preferred. Certification/Licensure/Registration... ..., Mental Health Act, Workplace Hazardous Material Information System. Demonstrated effective oral and written communication skills...Level 2Long term contractShift workWeekend workAfternoon shift
- ...supplying air distribution, critical controls, and noise control products.... ...match your contribution (up to 3% of your salary). Wellness... ...feasibility. • Partner with system architects, developers, and... ...-departmental environments. 2. Education: ◦ Bachelor’s degree...Work at office
- ...variety of administrative duties. Demonstrated ability to independently compose basic correspondence. Ability to maintain a high level of confidentiality. Demonstrated ability to effectively contribute and lead in a team environment. Ability to work in a fast-...Work at officeShift workWeekend workAfternoon shift
- ...Unit: Medical Device Reprocessing 2 - HSC Job Stream: Clinical... ...to operate any sterilization system in use within the department including... ..., while ensuring infection control principles are followed.... ...of Indigenous People within all levels of our workforce. Indigenous applicants...Shift workNight shiftWeekend workAfternoon shift
- ...Act, Mental Health Act, Workplace Hazardous Material Information System (WHMIS), Principles of Routine Practices (Universal Precautions)... ...to increasing the representation of Indigenous People within all levels of our workforce. Indigenous applicants are encouraged to apply and...Trial periodShift workWeekend workAfternoon shift
- Job Overview: Looking for a high energy reliable part time babysitter for our super fun little girls. We have a 8 year old and a 3 year old. Looking primarily for after school/evenings and one weekend day. We live in the River Heights area. Starting date mid/end of September...Part timeLive In10 hours per weekFlexible hoursWeekend workDay shiftAfternoon shift1 day per week
$15 - $20 per hour
We are a loving family in Winnipeg, Manitoba, looking to hire a dedicated nanny to care for our young son (111 months old). We also have two corgis. We are looking for part-time positions, that are ideally 4 days a week for 4-5 hours. However, we are open to full-time or potential...Hourly payFull timePart timeLive InLive outNight shift- ...range of supports for adults, children and their families. Our over 2,000 staff follow a person-centered approach and adapt to the needs... ...that enrich our community. We stand firmly against individual and systemic discrimination and racism as per the Canadian Human Rights Act....Long term contractPart timeMonday to friday
- ...Positions Available: ~ Looking for 2-3 Casuals Schedule: ~ able to pick 2-3 shifts per week - Monday to Friday: 8:00AM - 4:15PM... ...enrich our community. We stand firmly against individual and systemic discrimination and racism as per the Canadian Human Rights Act....Long term contractCasual workLive InMonday to fridayFlexible hoursShift work
- ...of the Director, Health Services, the Nurse 2 is responsible for providing professional... ..., Workplace Hazardous Material Information System (WHMIS), Principles of Routine Practices (Universal... ...of Indigenous People within all levels of our workforce. Indigenous applicants are...Shift workNight shiftWeekend work
$23.4 per hour
...Level 1 Driver Trainer Location: Winnipeg, MB Schedule: Part-Time Hourly Premium: Home... ..., which includes: Availability of 1 to 2 hrs per day (7-10 hrs/week). Availability... ...collisions or moving violations in past three (3) years dated within the past 30 days...Hourly payLong term contractContract workPart timeLocal areaMonday to friday2 days per week- ...you. The Role The Western Canada Lottery Corporation (WCLC) is... ...looking to add a Senior Business Systems Analyst to our Application... ...regulatory requirements and/or security controls. ~ Work with vendors and... ...changes Qualifications Minimum 3+ years' experience as a Senior...Full time
- ...supplying air distribution, critical controls, and noise control products.... ...will have free access to Canada’s first Digital Pharmacy, PocketPills... ...match your contribution (up to 3% of your salary). Gym... ...invited to be a part of that. Lab Systems Software Developer We are...
- ...Antec Controls ( is a leader in environmental monitoring and control... ...match your contribution (up to 3% of your salary). Wellness... ...be a part of that. Embedded Systems Designer – Antec Controls We... ...• Maintaining engineering documentation, design records,...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Level 2/3 Control Systems Engineer - Canada. Be the first to apply!
Related searches
- level 2 dental assistant Winnipeg, MB
- ndt level 3 Winnipeg, MB
- technicien instrumentation et contrôle Winnipeg, MB
- project control remote Winnipeg, MB
- automation engineer - process controls systems Winnipeg, MB
- control and automation engineer Winnipeg, MB
- project control analyst Winnipeg, MB
- control electrician Winnipeg, MB
- johnson controls Winnipeg, MB
- contrôle de gestion Winnipeg, MB

