Intermediate Structural Engineer Rq07378
Morson Group
Role: Intermediate Structural EngineerLocation:
Burnaby, BCContract Duration:
2026-11-16 - 2027-11-26Max T4:
$68.43Max INC:
$82.80/
General DescriptionThe E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.
Experience and Role Accountabilities
A minimum four (4) years of in a relevant engineering field or equivalent.
Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.
Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
Participate in BC Hydro’s engineering practice by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that BC Hydro’s engineering standards are maintained.
Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
Engage with BC Hydro’s senior engineering team where engineering problems are difficult, complex, or unusual to support BC Hydro’s management of engineering risk.
Important Notes
Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.
BC Registrants provided to BC Hydro through this assignment shall work under BC Hydro’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.
Education and Skills
University graduate in applied science or engineering
Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction
BC Hydro uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius
Familiarity with CAD systems and drawing standards
Ability to use standard industry design/analysis software Intermediate MS Office skills (Word, Excel, and PowerPoint)
Intermediate English skills for professional environment, written and spoken
Experience / Skills
Minimum 4 years of structural engineering experience in Canada.
Collaborates well working in a multi-discipline team.
Must be independent and work effectively with general direction and seek guidance when appropriate.
A team player that is approachable, takes initiatives, and is a proven problem solver.
Strong verbal and written English communication skills, with demonstrated report writing skills.
Can engage effectively with contractors and officials in a professional manner
Demonstrated experience in structural assessment, design, rehabilitation, and construction activity support.
Demonstrated working experience in the design of reinforced concrete, structural steel, with working knowledge of applicable codes, standards, and engineering practices.
working knowledge of common industry construction practices in British Columbia.
Practical understanding of safety in the field / thorough understanding of environmental effects and impacts of existing conditions, construction activities, and permanent installations
Familiar with codes and design requirements of Authorities Having Jurisdiction and the permitting process.
Demonstrated understanding of EGBC professional practice requirements, including quality management, document control, engineering checks and reviews, records management, and retention of engineering documentation.
Ability to serve as Professional of Record (PoR) for non-standard designs including undertaking engineering tasks assigned by senior engineer for complex designs, assess field conditions and develop practical engineering solutions to support project delivery.
Experience with construction staging, temporary works, excavation support systems, and constructability reviews.
Working experience with structural analysis software such as S-Frame, SAP2000, STAAD, and common industry software.
Intermediate MS Office skills (Word, Excel, Outlook, Teams, and PowerPoint) and common office environment software.
Qualifications
Bachelor’s degree in civil/structural Engineering by recognized universities in Canada.
Registered P.Eng. (Civil/Structural) in good standing with EGBC.
Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.
The candidate shall work under BC Hydro’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.
Current confined space entry training and fall arrest training (successful candidate may acquire within 1 month of start of work for BC Hydro).
PSSP 2, 3, and DBC(can be provided by BCH).
Nice-to-have skills and qualifications
Experience working for a Canadian utility owner is an asset.
Experience performing a variety of structural non-destructive testing (NDT) for reinforced concrete structures is considered an asset.
Experience with structural concrete repair and rehabilitation is an asset.
Experience with seismic retrofit of existing structures is an asset.Knowledge and experience in design related to Distribution plant including U/G and O/H - may include feasibility studies, preliminary design, detailed design, field work, etc.
Demonstrated experience in structural assessment, design, rehabilitation, and construction activity support of reinforced concrete utility structures, including maintenance holes, vaults, duct banks, and other underground infrastructure.
Familiar with MMCD, MoTT Utilities Manual, CoV Utilities Design Manual, etc. and design and permitting requirements of Authorities Having Jurisdiction.
Bridge design knowledge is considered an asset.Experience with asset structural condition assessment, risk-based prioritization, and rehabilitation planning for aging infrastructure is an asset.
Location details
The candidate must reside in the Lower Mainland in BC.
Flexible work model based on business needs.
Must be willing to work from the BC Hydro office for 5 days a week during training and familiarization with the work and team (potentially first 6-7 months).
Role may switch to hybrid subject to the needs of the business and approval by management.
The position is based out of BC Hydro’s Edmonds office in Burnaby, BC.
Relocation assistance will not be provided by BC Hydro.
Travel requirements
Valid Class 5 BC Driver License - must be willing to travel including by plane and by boat.
Must have access to a personal vehicle and smartphone and be able to use them for business purposes as required.
Any role specializations or niche expertise needed
Requires working outdoors in all weather conditions with exposure to construction-related elements and may include walking in steep grades and long distances occasionally
Must be comfortable using ladders, fall arrest harnesses, and other PPE, during field work activities
Must be knowledgeable and comfortable using the latest remote working technologies to correspond and collaborate with project stakeholders.
May require working nights or weekends occasionally based on project needs.
#J-18808-Ljbffr
Burnaby, BCContract Duration:
2026-11-16 - 2027-11-26Max T4:
$68.43Max INC:
$82.80/
General DescriptionThe E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.
Experience and Role Accountabilities
A minimum four (4) years of in a relevant engineering field or equivalent.
Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.
Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
Participate in BC Hydro’s engineering practice by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that BC Hydro’s engineering standards are maintained.
Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
Engage with BC Hydro’s senior engineering team where engineering problems are difficult, complex, or unusual to support BC Hydro’s management of engineering risk.
Important Notes
Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.
BC Registrants provided to BC Hydro through this assignment shall work under BC Hydro’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.
Education and Skills
University graduate in applied science or engineering
Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction
BC Hydro uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius
Familiarity with CAD systems and drawing standards
Ability to use standard industry design/analysis software Intermediate MS Office skills (Word, Excel, and PowerPoint)
Intermediate English skills for professional environment, written and spoken
Experience / Skills
Minimum 4 years of structural engineering experience in Canada.
Collaborates well working in a multi-discipline team.
Must be independent and work effectively with general direction and seek guidance when appropriate.
A team player that is approachable, takes initiatives, and is a proven problem solver.
Strong verbal and written English communication skills, with demonstrated report writing skills.
Can engage effectively with contractors and officials in a professional manner
Demonstrated experience in structural assessment, design, rehabilitation, and construction activity support.
Demonstrated working experience in the design of reinforced concrete, structural steel, with working knowledge of applicable codes, standards, and engineering practices.
working knowledge of common industry construction practices in British Columbia.
Practical understanding of safety in the field / thorough understanding of environmental effects and impacts of existing conditions, construction activities, and permanent installations
Familiar with codes and design requirements of Authorities Having Jurisdiction and the permitting process.
Demonstrated understanding of EGBC professional practice requirements, including quality management, document control, engineering checks and reviews, records management, and retention of engineering documentation.
Ability to serve as Professional of Record (PoR) for non-standard designs including undertaking engineering tasks assigned by senior engineer for complex designs, assess field conditions and develop practical engineering solutions to support project delivery.
Experience with construction staging, temporary works, excavation support systems, and constructability reviews.
Working experience with structural analysis software such as S-Frame, SAP2000, STAAD, and common industry software.
Intermediate MS Office skills (Word, Excel, Outlook, Teams, and PowerPoint) and common office environment software.
Qualifications
Bachelor’s degree in civil/structural Engineering by recognized universities in Canada.
Registered P.Eng. (Civil/Structural) in good standing with EGBC.
Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.
The candidate shall work under BC Hydro’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.
Current confined space entry training and fall arrest training (successful candidate may acquire within 1 month of start of work for BC Hydro).
PSSP 2, 3, and DBC(can be provided by BCH).
Nice-to-have skills and qualifications
Experience working for a Canadian utility owner is an asset.
Experience performing a variety of structural non-destructive testing (NDT) for reinforced concrete structures is considered an asset.
Experience with structural concrete repair and rehabilitation is an asset.
Experience with seismic retrofit of existing structures is an asset.Knowledge and experience in design related to Distribution plant including U/G and O/H - may include feasibility studies, preliminary design, detailed design, field work, etc.
Demonstrated experience in structural assessment, design, rehabilitation, and construction activity support of reinforced concrete utility structures, including maintenance holes, vaults, duct banks, and other underground infrastructure.
Familiar with MMCD, MoTT Utilities Manual, CoV Utilities Design Manual, etc. and design and permitting requirements of Authorities Having Jurisdiction.
Bridge design knowledge is considered an asset.Experience with asset structural condition assessment, risk-based prioritization, and rehabilitation planning for aging infrastructure is an asset.
Location details
The candidate must reside in the Lower Mainland in BC.
Flexible work model based on business needs.
Must be willing to work from the BC Hydro office for 5 days a week during training and familiarization with the work and team (potentially first 6-7 months).
Role may switch to hybrid subject to the needs of the business and approval by management.
The position is based out of BC Hydro’s Edmonds office in Burnaby, BC.
Relocation assistance will not be provided by BC Hydro.
Travel requirements
Valid Class 5 BC Driver License - must be willing to travel including by plane and by boat.
Must have access to a personal vehicle and smartphone and be able to use them for business purposes as required.
Any role specializations or niche expertise needed
Requires working outdoors in all weather conditions with exposure to construction-related elements and may include walking in steep grades and long distances occasionally
Must be comfortable using ladders, fall arrest harnesses, and other PPE, during field work activities
Must be knowledgeable and comfortable using the latest remote working technologies to correspond and collaborate with project stakeholders.
May require working nights or weekends occasionally based on project needs.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Intermediate Structural Engineer Rq07378 in Winnipeg, MB vacancy
- Intermediate Structural EngineerDRA Global Limited is an international multi‑disciplinary engineering, project delivery and operations management group, predominantly focused on the mining, minerals and metals industry. The Group has an extensive track record spanning almost...SuggestedFull timeWork at office
- As an Intermediate Structural / Civil Engineer , you will lead and execute small to large-scale engineering projects from concept through construction... ...dams, tailings dams, river diversion works, hydraulic structures, surface drainage management facilities, irrigation...SuggestedLong term contractWork at officeWork from homeHome officeFlexible hours
$82k - $103k per year
The Opportunity WHM Structural Engineers is seeking an Intermediate Structural Engineer to contribute to the design and delivery of structural building projects... ...concrete, steel, wood-frame, mass timber, and hybrid structures, giving our engineers exposure to a wide range of...SuggestedLong term contractFull timeFor contractorsWork at office- Structural design, analysis, and construction support across PRI's... ...TYPEFull-time, permanent Intermediate level About The OpportunityPRI... ...is a multidisciplinary engineering and environmental consulting... ...renovations, and industrial structures, using CSA and National Building...SuggestedPermanent employmentContract workFor contractorsCasual workWork from home
$95k - $135k per year
Intermediate Structural Engineer Tetra Tech Canada Inc. CNU Division Discover your full potential. At Tetra Tech, we are collaborating with... ...hand-on expertise in the design of heavy industrial structures (steel, concrete, wood, masonry), preferably in the power...SuggestedFor contractorsInternshipWork at officeLocal area$70.02k - $124.41k per year
...consultants, scientists, strategists, and engineers all dedicated to solving the world’s... ...institution.5-10 years prior experience in structural engineering.Registered as a Licensed... ...and inspection experience in industrial structures including shiploader equipment, conveyors...For subcontractorLocal areaFlexible hours$90k - $120k per year
The Opportunity Associated Engineering, a proudly Canadian, Employee-owned Company is... ...seeking an experienced and dedicated Intermediate Structural Engineer to join our team in our... ...Inspection and assessment of existing bridge structures for municipal clients.Design of...Contract workInternshipWork at officeLocal areaFlexible hours$105k - $125k per year
...in Canada is growing! We are currently recruiting for an Intermediate Structural Engineer to join our Minerals and Metals Business line in the Vancouver... ...analysis and design of steel, concrete, and masonry structures and concrete foundations for mining process plants or infrastructure...InternshipWork at officeWorldwide$73k - $100k per year
...to re-imagine the future by changing the way that buildings are conceived and constructed. Entuitive is looking for an Intermediate Structural Engineer, based in our Toronto office. Take the opportunity to learn more about the structural engineering service at Entuitive....Contract workWork at officeFlexible hours- ...all share. We are a multi-disciplinary practice of architects, interior designers, urban designers and planners, structural, mechanical and electrical engineers, landscape architects and sustainability experts who design for community wellbeing and urban vibrancy. We are a...Contract workRelocation
- ...integrated design practice. Our architects, engineers, interior designers, consultants,... ...design your place with Stantec. The structures that make up the landscape of our daily... ...OpportunityThe successful candidate for this Intermediate Structural Engineer – Buildings position...Long term contractPermanent employmentFull timeTemporary workPart timeFor contractorsCasual workWork at officeFlexible hours
- ...is proud to be a leading provider of Engineering, Procurement, Construction and Construction... ...are currently seeking a qualified Intermediate Structural Engineer to join our Energy team,... ...Analyze new and existing structures using STAAD.Pro, S-Frame and Advance Design...Long term contractPermanent employmentFull timeWork at officeLocal areaImmediate startRemote workFlexible hours
- ...full potential in an environment that’s engineered for people. At CIMA+, we care about our... ...Infrastructure team in BC is looking for a Structural Engineer to join our Vancouver office.... ...infrastructure projects involving underground structures, electrical substations, retaining walls...Permanent employmentFor contractorsWork at officeLocal area
$92k - $121.9k per year
...With an unmatched breadth and depth of engineering, advisory and science-based expertise, our... ..., Marine & Coastal team and apply your structural engineering expertise to some of Canada'... ...infrastructure, industrial facilities, concrete structures, heavy civil projects, and structural...Contract workLocal areaRemote workFlexible hours- ...This OpportunityReporting to the VP, Structural Engineering, you will be an integral part of the engineering... .... EastPoint is looking for an Intermediate Structural Engineer with 5 years of... ...including, but not limited to marine structures, bridges, and buildings. Experience...For subcontractorWork at office
- ...all services offered in the field of engineering from conceptual and feasibility studies... ...challenges, WSP is currently seeking an Intermediate Structural Engineer to join our team located... ...design of Timber, Steel, and Concrete Structures; Analysis and design of foundation...For contractorsWork from homeFlexible hours
$90k - $130k per year
...the limits of what’s possible to make the world smarter, more connected and more sustainable. We are looking for an Intermediate Structural Engineer to join our Toronto, Ottawa, Burnaby or Calgary team. In this role you’ll participate in the...Contract workFor contractorsRemote work$90k - $130k per year
The OpportunityAssociated Engineering, a proudly Canadian, Employee‑owned Company is seeking an experienced and dedicated Intermediate Structural Bridge Engineer to join our team in our... ...Design and analysis of new and existing structures, condition assessments, project...InternshipWork at officeLocal areaFlexible hours- Are you passionate about Structural Engineering? Do you thrive on variety, moving between different projects and assignments? Do you enjoy... ...be the role for you! We’re currently looking for an INTERMEDIATE STRUCTURAL ENGINEER to join our Kingston team. What does...For contractorsInternshipWork at office
$90k - $167k per year
...globally as a leader in the Engineering, Procurement, Construction,... ...requirementsMinimum 5 years of structural design experience on heavy... ...materialsPractical field experience.Intermediate computer and software skills... ..., concrete, and steel structures by hand and computer...For contractorsWork at officeLocal areaFlexible hours$98.8k - $130.8k per year
...With an unmatched breadth and depth of engineering, advisory and science-based expertise,... ...will be shaping a better world.As an Intermediate Structural Engineer based in Sudbury, Ontario, you... ..., brownfield modifications, existing structure assessments, or construction administration...Long term contractInternshipLocal areaRemote workFlexible hours- ...and agile environment. Your OpportunityDillon’s Structures Transportation Discipline is seeking a Bridge Engineer to fill an existing vacancy within our... ...relevant work experience in structural design for the intermediate role Experience Experienced in the design of...Contract workFor contractorsWork at officeFlexible hours
- Your future role on our teamBy joining our Structural Engineering team, you'll be required to work with multidisciplinary teams on one or more... ...You’ll also help prepare engineering documents to design structures for projects in the heavy industry, mining and metals, energy...Work at officeLocal areaWork from homeFlexible hours
- Structural analysis and design define this Intermediate Structural Engineer position with EXP in Markham, Ontario. Support steel, concrete, masonry, and renovation projects.EXP seeks an Intermediate Structural Engineer for its Markham office. The position supports residential...Contract workWork at office
$65k - $100k per year
Intermediate Structural EngineerMarkham, ONAt EXP, we’re driven to provide innovative solutions for... ...and natural environments. As a team of engineers, architects, designers, scientists, creators... ...of steel, concrete, masonry, and structures including renovations of existing...Contract workWork at office- ...Canada's largest private sector nuclear engineering groups. We have been providing a wide range... ...technology. Your role Perform structural analysis, seismic qualification and assessment... ...design experience in steel and concrete structures in Nuclear Power Plants and/or...InternshipFlexible hours
- Structural analysis and seismic design define this Intermediate Structural Engineer position with Arcadis in Toronto West, Ontario, supporting transportation and building projects... ...and manage projects for new and modified structures. You will analyze foundations, structures,...
- ...operations. Englobe - Who we areHerold Engineering Limited is a Vancouver Island-based... ...engineering firm specializing in civil, structural, building envelope, marine, and bridge engineering... ...of 10 years of experience building structures working on a variety of projects Must...Contract workFor contractorsInternshipLocal areaFlexible hours
$73k - $100k per year
...reimagining the future of bridge engineering — from rehabilitation and... ...delivery.Entuitive is looking for an Intermediate Engineer to primarily focus on structural design and evaluation of bridges... ...the rehabilitation of existing structures.Conduct and oversee inspections...Contract workFor contractorsWork at officeLocal area- Elevate your career as an Intermediate Structural Engineer at Stantec in Calgary, Alberta. Contribute your structural design expertise while collaborating on innovative projects in various sectors. In this role, you will work within the Buildings Engineering team, engaging...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Intermediate Structural Engineer Rq07378. Be the first to apply!
Related searches
- structural engineer part time Winnipeg, MB
- lead structural engineer Winnipeg, MB
- ingénieur structure Winnipeg, MB
- structural engineer Winnipeg, MB
- junior structural engineer Winnipeg, MB
- structural engineer part time
- lead structural engineer
- entry level structural engineer
- structural steel engineer
- ingénieur structure

