High-Speed Balancing Engineer (Relocation To Saudi Arabia Is Required)
Aramco
We are seeking a High-Speed Balancing Engineer to join our Mechanical Services Shops. Mechanical Services Shops is responsible for providing rotating and static equipment repair and fabrication of components.
Your primary role is to engineer and execute rotor balancing and mechanical-run testing in a vacuum rig at operating-speed conditions. You will combine rotor dynamics, vibration measurement, balancing calculations, and machine knowledge to achieve stable, and repeatable rotor behavior.
Key Responsibilities:As the successful candidate you will be required to perform the following:
Rotor & Test Review:
Review rotor construction, mass properties, service speed, bearings, seals, coupling, critical speeds, mode shapes, repair history, and specified balance and vibration criteria. Design and fabrication of custom-made journal bearings to setup the rotor.
Balancing Procedure Development:
Define low- and high-speed balancing sequences, correction planes, trial weights, speed bands, thermal stabilization, instrumentation, safety limits, and run acceptance.
Test Execution & Analysis:
Conduct controlled runs, acquire shaft vibration, phase, speed, temperature, and orbit data, and calculate correction weights.
Diagnostics:
Differentiate unbalance from, looseness, instability, thermal effects, electrical runout, mechanical runout, or instrumentation error.
Reporting & Technical Support:
Prepare balancing and run-test reports, document residual unbalance and vibration, recommend corrective actions.
You will hold a Bachelor's degree in Mechanical Engineering from a recognized and approved program.
You will have at least 15 years of rotating-equipment or vibration experience, including a minimum of 8 years in rotor dynamics and high-speed balancing.
Strong capability in rotor-dynamic calculations, balancing procedures, vibration analysis, phase, orbits, and critical-speed behavior is required.
Hands-on experience with high-speed balancing facilities, proximity probes, key-phasors, accelerometers, data-acquisition systems, and machinery-protection interfaces is necessary.
Knowledge of rotor repairs, shaft runout, bearing and seal behavior, coupling effects, and safe high-energy test operation is required.
Mobius Institute vibration Category III or IV, or an equivalent advanced certification, is strongly preferred.
Aramco energizes the world economy.Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer.
With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society.
Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply.
We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization.
Working environment.Our high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities we offer, and are remunerated accordingly.
At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, we invest heavily in talent development.
We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.
#J-18808-Ljbffr
Your primary role is to engineer and execute rotor balancing and mechanical-run testing in a vacuum rig at operating-speed conditions. You will combine rotor dynamics, vibration measurement, balancing calculations, and machine knowledge to achieve stable, and repeatable rotor behavior.
Key Responsibilities:As the successful candidate you will be required to perform the following:
Rotor & Test Review:
Review rotor construction, mass properties, service speed, bearings, seals, coupling, critical speeds, mode shapes, repair history, and specified balance and vibration criteria. Design and fabrication of custom-made journal bearings to setup the rotor.
Balancing Procedure Development:
Define low- and high-speed balancing sequences, correction planes, trial weights, speed bands, thermal stabilization, instrumentation, safety limits, and run acceptance.
Test Execution & Analysis:
Conduct controlled runs, acquire shaft vibration, phase, speed, temperature, and orbit data, and calculate correction weights.
Diagnostics:
Differentiate unbalance from, looseness, instability, thermal effects, electrical runout, mechanical runout, or instrumentation error.
Reporting & Technical Support:
Prepare balancing and run-test reports, document residual unbalance and vibration, recommend corrective actions.
You will hold a Bachelor's degree in Mechanical Engineering from a recognized and approved program.
You will have at least 15 years of rotating-equipment or vibration experience, including a minimum of 8 years in rotor dynamics and high-speed balancing.
Strong capability in rotor-dynamic calculations, balancing procedures, vibration analysis, phase, orbits, and critical-speed behavior is required.
Hands-on experience with high-speed balancing facilities, proximity probes, key-phasors, accelerometers, data-acquisition systems, and machinery-protection interfaces is necessary.
Knowledge of rotor repairs, shaft runout, bearing and seal behavior, coupling effects, and safe high-energy test operation is required.
Mobius Institute vibration Category III or IV, or an equivalent advanced certification, is strongly preferred.
Aramco energizes the world economy.Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer.
With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society.
Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply.
We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization.
Working environment.Our high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities we offer, and are remunerated accordingly.
At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, we invest heavily in talent development.
We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.
#J-18808-Ljbffr
Vacancy posted 2 hours ago
Similar jobs that could be interesting for youBased on the High-Speed Balancing Engineer (Relocation To Saudi Arabia Is Required) in Winnipeg, MB vacancy
$400k per year
...Job Description: Position: Machine Learning Engineer Location: Remote / Hybrid Employment Type: Full-time Responsibilities... ...ML workflows, research findings, and technical guidelines. Requirements: Requirements Bachelor’s or Master’s degree in Computer Science...RelocationFull timeRemote work- We are seeking a Scheduling Engineer to join Project Control... ...successful candidate you will be required to perform the following: Develop... ...subsequent reporting in Saudi Aramco systems. Monitor project... ...Headquartered in the Kingdom of Saudi Arabia, and with offices around the...Relocation
- ...proponent technical/operational requirements in a timely and most cost-... ...provide alternatives. Implement Saudi Aramco Procurement Manual for... ...a Bachelor’s degree in in Engineering, Business/Public... ...Headquartered in the Kingdom of Saudi Arabia, and with offices around the...RelocationContract workInternshipRemote work
- Sr. Rotating Equipment Engineer (Relocation to Saudi Arabia is Required) Experienced Pump Specialist with strong technical capabilities and extensive experience with pumps, pumping systems and seals/sealing systems. The candidate should have exceptionally good communication...RelocationInternship
- ...Electrical & Instrumentation Engineer Overview: We are seeking a... ...ensure strict compliance with Saudi Aramco standards, NEC/IEC codes... ...and international regulatory requirements, while actively managing on-site... ...Headquartered in the Kingdom of Saudi Arabia, and with offices around the...RelocationFor contractors
- ...successful candidate you will be required to perform the following:... ...strategies. Collaborate with engineering and maintenance teams to develop... ...comply with relevant Saudi Aramco standards, international... ...Headquartered in the Kingdom of Saudi Arabia, and with offices around the...Relocation
- ...Lead high-voltage power-supply development at SCIEX in Concord, Ontario, using analog... ...R&D environment. As Senior Electrical Engineer/Designer, you will guide analog and high-... ...the complete lifecycle. Your work spans requirements, detailed design, qualification, manufacturing...
- Candidate must relocate to Saudi Arabia. OverviewWe are seeking a Reservoir Geologist with expertise in characterizing and advancing unconventional... ...Key ResponsibilitiesAs the successful candidate you will be required to perform the following: Integrate and interpret...RelocationInternship
- A global energy company seeks a Corrosion Engineer to relocate to Saudi Arabia. You will conduct integrity and corrosion analysis studies, develop plans, and implement technologies to prevent corrosion. With 15+ years of experience required, including senior role expertise,...RelocationFull timeRelocation package
$3000 - $5000 per month
...user operation, data and regional teams to deliver projects. Requirements: 1.2027 graduate, Master’s degree or above. Preferred majors:... ...with combined language & data analytics background are highly preferred. 2.**Must-have: Arabic proficiency** — able to read...RelocationFull timeLocal area$140k - $160k per year
...commission Company Overview: We are a high-tech enterprise focused on the R&D of... ...2022 6,193 employees, with 56% being engineers Over 8,000 authorized patents 3,000+... ...regions, with more than 500 partners Requirements: We are looking for a Sales Manager in...RelocationFull timeLocal area$2000 - $4000 per month
...training programs across international markets, monitor abnormal issues, and maintain close communication with regional teams. Requirements: 1.Graduating in 2027, Bachelor’s degree or above. Majors including Business Administration, International Business, Hotel Management...RelocationFull timeInternshipLocal areaOverseas- ...Northern Africa market, frequent travel required) · Johannesburg, South Africa (Responsible... ...solution discussions, client visits, requirement management and guidance, solution development... ...of data center technology (HVAC/low and high-voltage power distribution/intelligent systems...RelocationFull time
- Engineer high-speed rotor balancing and vacuum-rig testing at Aramco, applying rotor dynamics and vibration measurement to rotating equipment. Work within Mechanical Services Shops.This High-Speed Balancing Engineer role focuses on rotor balancing and mechanical-run testing...
- Job Description: Location: Remote / On-site (as required) Department: Global Business / International Trade Reports to: General Manager / Director of International Business Requirements: Benefits: Skills: Ad SalesRelocationFull timeRemote work
$140k - $300k per year
...vulnerabilities related to blockchain, including exchanges, wallets, and smart contracts. Requirements: Requirements: Bachelor's degree in Computer Science or Engineering. 5 years or more of experience. Proficient in at least one programming language: Golang/...RelocationFull time$4000 - $8000 per month
...Job Description: Requirements: Experience: At least 1 year of short video operations experience, familiar with short video operation strategies, skilled in TikTok creative content production, shooting, and post-editing optimization. Understanding of Overseas Users: Familiar...RelocationFull timeOverseas$22.5 per hour
...experienced, certified Forklift Operators experienced on Counter Balance & Cherry picker for immediate openings in Southwest Winnipeg.... ...D: Wed (1:00 AM – 7:00 AM) & Thurs – Sat (7:00 PM – 7:00 AM) Requirements: Valid Forklift License/Certification Prior experience operating...Weekly payLong term contractFull timeImmediate startShift workNight shiftDay shift- Crude Oil Marketing Specialist - Relocate to Saudi ArabiaAramco is seeking a Marketing Specialist... ...addresses short- and long-term needs, highly complex issues and challenges. Mentor... ...Administration, Marketing, Economics, Engineering, Environmental Science or equivalent from...RelocationLong term contractFull timeTemporary work
- This position requires full relocation to Saudi Arabia. It is a permanent full time Expat Relocation Package. Job OverviewWe are seeking an Electrical Engineer to join Saudi Aramco’s Downstream under Power Systems Planning Department located in Dhahran. Power Systems...RelocationLong term contractPermanent employmentFull timeTemporary workFor contractorsRelocation package
$4000 - $5000 per month
...Logistics Specialist Department: Supply Chain / International Logistics Location: Remote / On-site (depending on region) Reports to: Logistics Manager / International Trade Manager Requirements: Benefits: Skills: Basics of Supply Chain Management, Global LogisticsRelocationFull timeRemote work- ...cables, supervise technicians, and ensure safe, compliant operations in demanding environments. The role requires extensive hands‑on experience, relocation to Saudi Arabia, and strong English communication. Opportunities include leadership in fault location and commissioning...Relocation
- ...supervise, implement, and review them. Plan, manage, and sell online e-commerce products. Acquire online traffic for the position. Requirements: Bachelor's degree or above. More than 3 years of experience in online marketing. Experience in managing a team of no less...RelocationFull time
$70k - $120k per year
...allocation. - Collaborate with our Data Engineering team to establish real-time analytics... ...thought leadership content (blogs, CT). Requirements: Requirements: - Minimum 3 years of... ..., analytical, and proactive. - High-energy and integrity-driven. - Demonstrates...RelocationContract workRemote work- ...progress to ensure the smooth execution of sales contracts Regularly travel to visit clients and participate in sales meetings Requirements: Valid driver's license with proficient driving skills Young, energetic, and passionate Extensive experience in field sales,...RelocationLong term contractFull time
- Corrosion Engineer – Relocate to Saudi Arabia, Permanent Expat Relocation PackageJoin our team at Aramco as a Corrosion Engineer in the Southern Area Asset Integrity Division (SAAID) of SAOP Technical Support Department. The role requires full relocation to Saudi Arabia...RelocationLong term contractPermanent employmentFull timeRelocation package
- ...open to qualified individuals who are willing and able to relocate to Saudi Arabia . Aramco energizes the world economy. Aramco occupies... ...capitalization. OverviewWe are seeking a Metallurgical Engineer to join our Mechanical Services Shops. Mechanical Services...RelocationFull time
- Turnaround & Inspection Engineer – Relocate to Saudi Arabia – Permanent Expat Relocation PackageJob Overview We are seeking a Turnaround & Inspection Engineer to join the Riyas NGL Fractionation Maintenance Division (RNGLFMD) of the Riyas NGL Fractionation Department...RelocationPermanent employmentFull timeFor contractorsRelocation package
- Apply advanced metallurgy and materials engineering expertise with Aramco in Saudi Arabia, supporting component fabrication, repair, and failure prevention. Relocation is required.As a Metallurgical Engineer in Mechanical Services Shops, you will support rotating and static...Relocation
- This position requires full relocation to Saudi Arabia. It is a permanent full time Expat Relocation Package. Job Overview We are seeking an English Content Creator to join our Channel Management Division. The Channel Management Division serves as the primary internal...RelocationPermanent employmentFull timeRelocation package
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to High-Speed Balancing Engineer (Relocation To Saudi Arabia Is Required). Be the first to apply!
Related searches
- ingénieur d'usine Winnipeg, MB
- vibration engineer Winnipeg, MB
- evaluation engineer Winnipeg, MB
- architectural engineer Winnipeg, MB
- ingénieur génie rural Winnipeg, MB
- contact center engineer Winnipeg, MB
- stage ingenieur Winnipeg, MB
- antenna engineer Winnipeg, MB
- completions engineer Winnipeg, MB
- junior aws engineer Winnipeg, MB

