Principal Gnc Systems Engineer
MDA
MDA is looking for a
GNC engineer
for the design, integration, verification, and operational support of GNC subsystems intended for our current and next-generation Earth observation and telecommunication satellites. The incumbent will design the complete subsystem, from algorithm development to hardware implementation, validation, and in-orbit support. The position requires in-depth expertise in orbital dynamics, attitude determination & control, as well as the definition and integration of real-time embedded software;
the engineer will work closely with multidisciplinary teams throughout the satellite life cycle.Summary of duties:
Architecture, Concept & Requirements
Establish functional and performance requirements (pointing accuracy, guidance, orbit-keeping Delta-V, fault tolerance) based on mission requirements.Produce system requirements, Interface Control Documents (ICD), and design descriptions.Perform requirements management and ensure bidirectional traceability throughout the project.Modelling & Benchmarking
Conduct comparative studies on all sensors and actuator families.Perform high-fidelity dynamic simulations (Matlab/Simulink, STK) in order to meet pointing requirements, respect error budgets, ensure control law stability, control fuel consumption, and guarantee survivability margins.Algorithm Development
Design and implement attitude determination and orbit determination algorithms.Develop control laws for 3-axis stabilization, guidance maneuvers, and station-keeping algorithms.Validate scenarios and algorithms through Monte-Carlo analysis and SIL/HIL testing on avionics test benches.Cross-Functional Coordination, Stakeholders & Program Interaction
Translate algorithms into FSW requirements on real-time operating systems.Collaborate with C&DH and FSW teams to implement TM/TC, schedulers, and FDIR logic.Present technical status, risk analyses, and benchmark study results to program management.Negotiate and maintain ICDs with subsystems.Support B&P activities (Phase 0 & pre-phase A).Equipment Selection & Design
Specify sensors and actuators, define interfaces (electrical, mechanical, thermal) and redundancy.Work with structural and thermal engineers for vibration resistance, in compliance with payload requirements.Review harness routing and power distribution of GNC equipment.Integration & Verification (IVV)
Draft Verification Plans, test matrices, and test procedures.Lead functional tests: sensor calibration, actuator command response, closed-loop attitude control on avionics test benches, and commissioning sequences.Perform FMECA and reliability analyses.Technical Leadership & Mentoring
Supervise and guide junior engineers and interns.Act as the technical liaison with external clients, partners, and suppliers.Participate in continuous improvement initiatives.Contribute to MDA’s knowledge base, process improvements, and standard developments.Configuration Management, Documentation
Maintain GNC standards (sensor/actuator interfaces, filter design, control law documentation).Ensure all artifacts, analyses, software, deliverables, and documents are version-controlled.Support design reviews (SRR, PDR, CDR, MRR/TRR, etc.).Support the technology roadmap and innovation.In-Orbit Support & Operations
Provide technical support to SatOps teams for satellite performance monitoring.Support anomaly cause investigations;
update databases and capitalize on return of experience (REX).Analyze telemetry and generate performance reports.Required Qualifications:
B.Sc. in Electrical, Aerospace, or Physics Engineering (M.Sc. preferred), with 10+ years of experience in GNC/AOCS on LEO, MEO, or GEO platforms.Mastery of orbital dynamics, multi-axis control laws, and Kalman filters.Strong writing skills and a solid understanding of space engineering fundamentals.Hands-on profile: capable of supporting integration, testing, and troubleshooting processes.Experience with Confluence and JIRA.Ability to work independently with minimal supervision.Ability to break down complex problems into basic elements to solve them through analysis, analogy, or creativity.Excellent written and oral communication skills in English (contact with clients outside Quebec and drafting deliverables in English).
#J-18808-Ljbffr
GNC engineer
for the design, integration, verification, and operational support of GNC subsystems intended for our current and next-generation Earth observation and telecommunication satellites. The incumbent will design the complete subsystem, from algorithm development to hardware implementation, validation, and in-orbit support. The position requires in-depth expertise in orbital dynamics, attitude determination & control, as well as the definition and integration of real-time embedded software;
the engineer will work closely with multidisciplinary teams throughout the satellite life cycle.Summary of duties:
Architecture, Concept & Requirements
Establish functional and performance requirements (pointing accuracy, guidance, orbit-keeping Delta-V, fault tolerance) based on mission requirements.Produce system requirements, Interface Control Documents (ICD), and design descriptions.Perform requirements management and ensure bidirectional traceability throughout the project.Modelling & Benchmarking
Conduct comparative studies on all sensors and actuator families.Perform high-fidelity dynamic simulations (Matlab/Simulink, STK) in order to meet pointing requirements, respect error budgets, ensure control law stability, control fuel consumption, and guarantee survivability margins.Algorithm Development
Design and implement attitude determination and orbit determination algorithms.Develop control laws for 3-axis stabilization, guidance maneuvers, and station-keeping algorithms.Validate scenarios and algorithms through Monte-Carlo analysis and SIL/HIL testing on avionics test benches.Cross-Functional Coordination, Stakeholders & Program Interaction
Translate algorithms into FSW requirements on real-time operating systems.Collaborate with C&DH and FSW teams to implement TM/TC, schedulers, and FDIR logic.Present technical status, risk analyses, and benchmark study results to program management.Negotiate and maintain ICDs with subsystems.Support B&P activities (Phase 0 & pre-phase A).Equipment Selection & Design
Specify sensors and actuators, define interfaces (electrical, mechanical, thermal) and redundancy.Work with structural and thermal engineers for vibration resistance, in compliance with payload requirements.Review harness routing and power distribution of GNC equipment.Integration & Verification (IVV)
Draft Verification Plans, test matrices, and test procedures.Lead functional tests: sensor calibration, actuator command response, closed-loop attitude control on avionics test benches, and commissioning sequences.Perform FMECA and reliability analyses.Technical Leadership & Mentoring
Supervise and guide junior engineers and interns.Act as the technical liaison with external clients, partners, and suppliers.Participate in continuous improvement initiatives.Contribute to MDA’s knowledge base, process improvements, and standard developments.Configuration Management, Documentation
Maintain GNC standards (sensor/actuator interfaces, filter design, control law documentation).Ensure all artifacts, analyses, software, deliverables, and documents are version-controlled.Support design reviews (SRR, PDR, CDR, MRR/TRR, etc.).Support the technology roadmap and innovation.In-Orbit Support & Operations
Provide technical support to SatOps teams for satellite performance monitoring.Support anomaly cause investigations;
update databases and capitalize on return of experience (REX).Analyze telemetry and generate performance reports.Required Qualifications:
B.Sc. in Electrical, Aerospace, or Physics Engineering (M.Sc. preferred), with 10+ years of experience in GNC/AOCS on LEO, MEO, or GEO platforms.Mastery of orbital dynamics, multi-axis control laws, and Kalman filters.Strong writing skills and a solid understanding of space engineering fundamentals.Hands-on profile: capable of supporting integration, testing, and troubleshooting processes.Experience with Confluence and JIRA.Ability to work independently with minimal supervision.Ability to break down complex problems into basic elements to solve them through analysis, analogy, or creativity.Excellent written and oral communication skills in English (contact with clients outside Quebec and drafting deliverables in English).
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Principal Gnc Systems Engineer in Winnipeg, MB vacancy
- MDA recherche un(e) ingénieur(e) GNC pour le design, l’intégration, la vérification et le support opérationnel des sous‑systèmes GNC destinés à nos satellites de télédétection et de télécommunications actuels et de prochaines générations. Le ou la titulaire devra concevoir...PrincipalInternship
- About the Role We are seeking a seasoned, hands-on Principal System Engineer to act as a technical vanguard and drive engineering excellence across our organization. Operating in a highly regulated banking environment, you will be the driving force behind our strategic technical...PrincipalPermanent employmentShift work
- ...remote for exceptional candidates. Term Full-timeOwn the backend systems that define how AI interacts with production environments. MCP-... ...the founder on technical direction and with the rest of the engineering team on shipping. Direct access, no layers, decisions happen in...PrincipalRemote work
- ...Austin, or Secaucus, applying validation expertise to complex system failures.As a principal technical leader, you will support post-silicon validation... ..., SoC, firmware, software, manufacturing, and global engineering teams.Key Responsibilities: Debug silicon, system validation...Principal
- ...career. Job Title: Edge and Enterprise Solution Architect & Systems Engineer 1. General Description of the RoleAs an Edge & Enterprise... ...12, Vulkan, ray tracing pipelines, neural rendering, or game engine performance profiling. Advanced Systems Engineering: Experience...PrincipalLong term contractInternship
- Lead silicon and system debug for AMD EPYC Server and AMD Instinct products in Markham, Austin, or Secaucus. Apply validation expertise across global engineering teams.As a Principal Systems Validation Engineer, you will lead post-silicon validation for next-generation server...Principal
- Staff / Principal Embedded Systems EngineerThe OpportunityWe're partnering with a well-funded, high-growth technology company entering an exciting phase of expansion and investment in its engineering capabilities. The business develops proprietary hardware and software solutions...PrincipalLong term contractWork at officeRemote workFlexible hours
- ...career. THE ROLE: The technical leader will be responsible for System and Silicon debug of AMD EPYC Server & AMD Instinct products.... ...of debug and resolution for system level failures working with engineering teams across AMD. Candidate will be immersed in challenging...PrincipalInternship
- Apply turbine systems expertise as a Principal Mechanical Engineer with Fluor, leading equipment packages, supplier alignment, and technical delivery. Support projects from concept through commissioning and performance testing.This senior engineering assignment covers gas turbines...Principal
- Elevate lululemon’s retail technology as a Senior Principal Engineer, specializing in interconnected systems and AI solutions. Influence the future with your engineering expertise. As a Senior Principal Engineer, you will take the lead on major technical initiatives across...Principal
- Lead rail systems safety consulting remotely for TÜV Rheinland, applying risk assessment and safety assurance expertise across North America.As Principal Safety Engineer, you will provide senior technical authority for rail and transit projects. Your work spans railroad operations...PrincipalRemote work
- # (Canada) Principal ML System EngineerPointClickCareRemoteCanadaDevOps & InfrastructurePosted Sep 29, 2026At PointClickCare our mission is... ...capabilities within PointClickCare, working closely with other engineering teams across the organization to identify, build and support...PrincipalLong term contractWork at officeRemote workFlexible hours
- Description & Requirements Principal Engineer, Retail Systemswho we arelululemon is an innovative performance apparel company for yoga, running... ...building software.The team owns and enables critical retail systems and platforms, including retail transacting platforms,...PrincipalLong term contractPermanent employmentPart time
- Lead AI/ML systems for digital forensics, spanning model training and deployment, in a full-time Canada and USA position.As a Principal AI/ML Engineer, you will build and operate systems powering digital forensics capabilities. Your work covers model training, evaluation, retrieval...PrincipalFull time
- Lead backend game systems engineering at Kabam’s Montreal studio, applying Node.Js and cloud infrastructure expertise onsite five days weekly.As Principal Backend Programmer, you will design advanced modular gameplay systems and influence Kabam’s games. Your work spans server...PrincipalFlexible hours
- ...time Own the product surface end to end. Turn complex, stateful system behavior into interfaces a cautious enterprise user can trust... ...work closely with the founder on product direction and with the engineering team on shipping. Direct access, no layers, decisions happen in...PrincipalFull timeRemote work
- Senior Embedded Systems Electronics engineer | Ingénieur senior en systèmes embarqués et électronique Innovobot Labs est le laboratoire d'innovation... ...à lire! Nous sommes à la recherche d’un(e) ingénieur(e) principal(e) en systèmes embarqués et en génie électrique pour se...Principal
- Principal Engineer - Embedded Systems IntegrationJob Posting - Principal Engineer - Embedded Systems IntegrationAbout BalkoBalko Technologies is a Quebec-based company that designs and develops modular, interoperable data capture systems for drones, ground vehicles, and maritime...PrincipalLong term contractWork at officeFlexible hours
- ...week, at minimum.The Role General Motors is seeking a Principal/Staff Software Engineer to shape and scale the engineering platforms that build, test... ...test, and release activities into a coherent engineering system.What You'll Do (Responsibilities) Be a critical leader...PrincipalWork at officeImmediate start
- lululemon seeks a Principal Engineer, Retail Systems to define the technical vision for global store and guest experiences. You will lead architecture decisions, balance delivery needs with reliability, and apply AI-enabled development across core retail platforms. You will...Principal
- ...candidate profiles. However, we encourage candidates who may fall outside of this range to apply as well.Principal, Software Engineering – InsurTech Finance Core Systems About the role: We are looking for a Principal Engineer to provide hands‑on technical leadership across...PrincipalLong term contractFlexible hours
- Big Viking Games in Canada is seeking a Principal Engineer, Agentic Products & Workflows to lead the design and build of the AI-first studio platform. You will own the agentic platform end to end, including orchestration, memory, evaluation, and human review surfaces, ensuring...Principal
- ...projects. You will manage projects involving multiple disciplines, including requirements, high-level software development, marketing, engineering and verification and validation. You will participate at various levels of project management, up to and including Core Team...Principal
- Get notified about new Director Of Software Engineering jobs in United States . 7,000+ Director Of Software Engineering Jobs in United States Director, Software Engineering, Product Eng Director of Software Engineering – Marketplace Director, Software Engineering...PrincipalWork at officeRemote work
$110.96k - $160.96k per year
...IMPACTYou will be part of a global Corporate Technology Platform Engineering Team. This position has the responsibility for administration,... ...of being a subject matter expert in multiple platforms/systems, maintaining 24x7x365 system availability. What The Role Offers...PrincipalInternship$89.91k - $113.73k per year
The Engineering Service Business Unit focuses on power system software development, power system and substation consulting studies and compliance testing services for electric utilities and other clients in power industry. We are the vendor of the cutting-edge power system...Full timeImmediate startRemote work- ...is our passion, and you’re invited to be a part of that •Our convenient Price Café offers free Tea and Coffee. Finishing Systems Engineering Assistant (8 Month Term – Winter 2027) The successful candidate's responsibilities will include: Support machine moves, setup...For contractors
- ...'s top employers and is recognized globally as a leader in the Engineering, Procurement, Construction, Fabrication, and Maintenance industry... ...for generation interconnections, substations, transmission systems, and high-voltage balance-of-plant infrastructure. Leads system...PrincipalWork at officeFlexible hours
- ...committed to delivering safe, reliable energy while driving financial excellence and innovation. We are seeking a Principal Electrical Engineer, Battery Energy Storage Systems (BESS) to join our team! In this role, you will serve as a senior technical authority for electrical...PrincipalRemplacementFull timeFor contractorsWork at officeLocal areaWork from homeFlexible hours
$126.5k - $176.5k per year
...national security. Job Title: Lead - Systems Engineering Job Code: 46111 Job Location: Onsite... ...on Guidance, Navigation and Control (GNC), video tracking and target detection systems... ...understanding of Systems Engineering principals Strong Project and technical...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Principal Gnc Systems Engineer. Be the first to apply!
Related searches
- mechanical engineering director Winnipeg, MB
- mechanical engineering project manager Winnipeg, MB
- directeur ingénierie Winnipeg, MB
- chief power engineer Winnipeg, MB
- director software engineering Winnipeg, MB
- project engineer assistant project manager Winnipeg, MB
- engineering project manager Winnipeg, MB
- chief engineer Winnipeg, MB
- general engineer Winnipeg, MB
- conseiller principal Winnipeg, MB

