Self-Driving Systems Diagnostics & Calibration Specialist
TSMG Holding
About The Role
We are looking for aAbout The Role
We are looking for a
Self-Driving Systems Specialist (SDS Specialist)
to support the diagnostics, calibration, configuration, and technical readiness of
self-driving systems
used in
autonomous vehicles
and
robotaxi fleets
across North America.
The SDS Specialist focuses on the technology layer of autonomous mobility: sensors, compute systems, software configurations, autonomous driving hardware, system diagnostics, calibration procedures, and technical validation. This role ensures that the
self-driving system
installed in each autonomous vehicle is functioning correctly, accurately calibrated, and ready to support safe testing, commercial deployment, and
autonomous ride-hailing operations .
You will work closely with
Senior Technicians, AV Operations Leads, Safety Operators, Depot Specialists, engineering teams, and fleet operations teams
to identify technical issues, execute structured troubleshooting procedures, and support reliable operation of autonomous vehicle platforms.
This position is ideal for candidates with experience in automotive electronics, ADAS systems, embedded systems, robotics, diagnostics, calibration, or complex technical support who want to work at the center of
autonomous vehicle deployment
and
robotaxi operations .
Key Responsibilities
Self-Driving System Diagnostics
Diagnose and troubleshoot self-driving system issues affecting autonomous vehicle performance and fleet readinessInvestigate technical problems related to cameras, LiDAR, radar, GPS/GNSS, compute units, sensors, connectivity modules, wiring, and autonomous driving hardwareExecute structured diagnostic procedures to identify root causes of SDS hardware, software, and configuration issuesSupport advanced troubleshooting for autonomous vehicle faults that impact testing, commercial operations, or robotaxi fleet availabilityEscalate complex technical cases to engineering teams with clear findings and supporting documentation
Hardware Support
Inspect, repair, replace, and validate SDS hardware components installed on autonomous vehiclesSupport installation and verification of cameras, LiDAR units, radar sensors, compute hardware, sensor mounts, antennas, and related componentsConfirm that autonomous driving hardware is correctly installed, secured, clean, functional, and ready for operationCollaborate with Senior Technicians on vehicle-level issues involving both standard automotive systems and SDS componentsEnsure all hardware work is completed according to strict safety, quality, and technical procedures
Software Configuration & Updates
Perform software updates, configuration changes, and system validation checks for autonomous driving systemsExecute defined software procedures using diagnostic tools, command-line tools, configuration files, or engineering-provided workflowsVerify successful software installation and confirm that the SDS is operational before the vehicle returns to serviceSupport troubleshooting of software-related issues affecting autonomous vehicle behavior, system communication, or operational readinessMaintain accurate records of software versions, configurations, updates, and validation results
Sensor Calibration & Validation
Perform calibration and verification activities for autonomous vehicle sensors and self-driving system componentsSupport calibration workflows involving cameras, LiDAR, radar, localization systems, and other perception-related hardwareValidate that the self-driving system is functioning correctly after maintenance, software updates, hardware replacement, or vehicle serviceAssist engineering teams with data collection, calibration testing, and system performance verificationEnsure autonomous vehicles meet technical readiness requirements before returning to robotaxi operations or on-road testing
Engineering & Operations Support
Serve as the on-site subject matter expert for SDS-related technical issuesProvide structured technical findings to engineering, fleet operations, and project teamsCollaborate with AV Operations Leads to prioritize SDS-related repairs and reduce vehicle downtimeSupport incident reviews, root-cause analysis, and technical escalation processesContribute to continuous improvement of troubleshooting workflows, calibration procedures, and operational documentation
Documentation & Compliance
Maintain accurate records of diagnostics, repairs, software updates, hardware changes, and calibration activitiesFollow strict operational, safety, and technical procedures when working with autonomous driving systemsComplete all required system validation checklists and technical reportsSupport compliance with internal quality standards, safety protocols, and customer requirementsEnsure all SDS-related work is traceable, repeatable, and properly documented
Requirements
Essential
Minimum 3+ years of experience in automotive electronics, diagnostics, embedded systems, robotics, technical support, or complex technical systemsStrong troubleshooting and analytical skillsExperience working with vehicle electronics, sensors, control systems, or advanced technical hardwareComfortable following structured software procedures and technical workflowsAbility to work with diagnostic tools, logs, technical documentation, and engineering instructionsHigh attention to detail and strong procedural disciplineGood communication skills and ability to work with cross-functional technical teamsFluent English
Strongly Preferred
Experience with ADAS, autonomous vehicles, robotics, sensor systems, or advanced driver assistance technologiesFamiliarity with LiDAR, radar, camera systems, GNSS, IMU, compute units, or perception-related hardwareExperience with Linux, command-line tools, CAN bus, vehicle networks, or embedded systemsExperience performing calibration, validation, or system integration activitiesBackground in automotive testing, AV operations, robotics labs, fleet diagnostics, or technical field support
What We Are Looking For
Successful SDS Specialists are precise, structured, and technically curious. They enjoy solving complex system problems and understand that reliable
self-driving system performance
is essential for safe
autonomous vehicle operations, commercial
robotaxi services, and fleet scaling.
This role requires someone who can work carefully with advanced hardware and software, follow engineering procedures exactly, and communicate findings clearly to both technical and operational teams. You should be comfortable working in a depot or technical operations environment where autonomous vehicles must be diagnosed, validated, and returned to service quickly and safely.
What We Offer
Opportunity to work directly with self-driving systems, autonomous driving hardware, and advanced vehicle technologiesHands-on involvement in robotaxi fleet operations, autonomous vehicle testing, and autonomous ride-hailing deployment across North AmericaExposure to robotics, ADAS, sensor calibration, embedded systems, EV platforms, and next-generation mobility technologiesStructured onboarding, technical procedures, and ongoing trainingCareer development opportunities in autonomous vehicle operations, AV diagnostics, robotics, and technical fleet supportCollaboration with engineering, operations, depot, technician, and safety teamsOpportunity to support new city launches, fleet scaling, and commercial autonomous mobility programs
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
#J-18808-Ljbffr
We are looking for aAbout The Role
We are looking for a
Self-Driving Systems Specialist (SDS Specialist)
to support the diagnostics, calibration, configuration, and technical readiness of
self-driving systems
used in
autonomous vehicles
and
robotaxi fleets
across North America.
The SDS Specialist focuses on the technology layer of autonomous mobility: sensors, compute systems, software configurations, autonomous driving hardware, system diagnostics, calibration procedures, and technical validation. This role ensures that the
self-driving system
installed in each autonomous vehicle is functioning correctly, accurately calibrated, and ready to support safe testing, commercial deployment, and
autonomous ride-hailing operations .
You will work closely with
Senior Technicians, AV Operations Leads, Safety Operators, Depot Specialists, engineering teams, and fleet operations teams
to identify technical issues, execute structured troubleshooting procedures, and support reliable operation of autonomous vehicle platforms.
This position is ideal for candidates with experience in automotive electronics, ADAS systems, embedded systems, robotics, diagnostics, calibration, or complex technical support who want to work at the center of
autonomous vehicle deployment
and
robotaxi operations .
Key Responsibilities
Self-Driving System Diagnostics
Diagnose and troubleshoot self-driving system issues affecting autonomous vehicle performance and fleet readinessInvestigate technical problems related to cameras, LiDAR, radar, GPS/GNSS, compute units, sensors, connectivity modules, wiring, and autonomous driving hardwareExecute structured diagnostic procedures to identify root causes of SDS hardware, software, and configuration issuesSupport advanced troubleshooting for autonomous vehicle faults that impact testing, commercial operations, or robotaxi fleet availabilityEscalate complex technical cases to engineering teams with clear findings and supporting documentation
Hardware Support
Inspect, repair, replace, and validate SDS hardware components installed on autonomous vehiclesSupport installation and verification of cameras, LiDAR units, radar sensors, compute hardware, sensor mounts, antennas, and related componentsConfirm that autonomous driving hardware is correctly installed, secured, clean, functional, and ready for operationCollaborate with Senior Technicians on vehicle-level issues involving both standard automotive systems and SDS componentsEnsure all hardware work is completed according to strict safety, quality, and technical procedures
Software Configuration & Updates
Perform software updates, configuration changes, and system validation checks for autonomous driving systemsExecute defined software procedures using diagnostic tools, command-line tools, configuration files, or engineering-provided workflowsVerify successful software installation and confirm that the SDS is operational before the vehicle returns to serviceSupport troubleshooting of software-related issues affecting autonomous vehicle behavior, system communication, or operational readinessMaintain accurate records of software versions, configurations, updates, and validation results
Sensor Calibration & Validation
Perform calibration and verification activities for autonomous vehicle sensors and self-driving system componentsSupport calibration workflows involving cameras, LiDAR, radar, localization systems, and other perception-related hardwareValidate that the self-driving system is functioning correctly after maintenance, software updates, hardware replacement, or vehicle serviceAssist engineering teams with data collection, calibration testing, and system performance verificationEnsure autonomous vehicles meet technical readiness requirements before returning to robotaxi operations or on-road testing
Engineering & Operations Support
Serve as the on-site subject matter expert for SDS-related technical issuesProvide structured technical findings to engineering, fleet operations, and project teamsCollaborate with AV Operations Leads to prioritize SDS-related repairs and reduce vehicle downtimeSupport incident reviews, root-cause analysis, and technical escalation processesContribute to continuous improvement of troubleshooting workflows, calibration procedures, and operational documentation
Documentation & Compliance
Maintain accurate records of diagnostics, repairs, software updates, hardware changes, and calibration activitiesFollow strict operational, safety, and technical procedures when working with autonomous driving systemsComplete all required system validation checklists and technical reportsSupport compliance with internal quality standards, safety protocols, and customer requirementsEnsure all SDS-related work is traceable, repeatable, and properly documented
Requirements
Essential
Minimum 3+ years of experience in automotive electronics, diagnostics, embedded systems, robotics, technical support, or complex technical systemsStrong troubleshooting and analytical skillsExperience working with vehicle electronics, sensors, control systems, or advanced technical hardwareComfortable following structured software procedures and technical workflowsAbility to work with diagnostic tools, logs, technical documentation, and engineering instructionsHigh attention to detail and strong procedural disciplineGood communication skills and ability to work with cross-functional technical teamsFluent English
Strongly Preferred
Experience with ADAS, autonomous vehicles, robotics, sensor systems, or advanced driver assistance technologiesFamiliarity with LiDAR, radar, camera systems, GNSS, IMU, compute units, or perception-related hardwareExperience with Linux, command-line tools, CAN bus, vehicle networks, or embedded systemsExperience performing calibration, validation, or system integration activitiesBackground in automotive testing, AV operations, robotics labs, fleet diagnostics, or technical field support
What We Are Looking For
Successful SDS Specialists are precise, structured, and technically curious. They enjoy solving complex system problems and understand that reliable
self-driving system performance
is essential for safe
autonomous vehicle operations, commercial
robotaxi services, and fleet scaling.
This role requires someone who can work carefully with advanced hardware and software, follow engineering procedures exactly, and communicate findings clearly to both technical and operational teams. You should be comfortable working in a depot or technical operations environment where autonomous vehicles must be diagnosed, validated, and returned to service quickly and safely.
What We Offer
Opportunity to work directly with self-driving systems, autonomous driving hardware, and advanced vehicle technologiesHands-on involvement in robotaxi fleet operations, autonomous vehicle testing, and autonomous ride-hailing deployment across North AmericaExposure to robotics, ADAS, sensor calibration, embedded systems, EV platforms, and next-generation mobility technologiesStructured onboarding, technical procedures, and ongoing trainingCareer development opportunities in autonomous vehicle operations, AV diagnostics, robotics, and technical fleet supportCollaboration with engineering, operations, depot, technician, and safety teamsOpportunity to support new city launches, fleet scaling, and commercial autonomous mobility programs
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
#J-18808-Ljbffr
Vacancy posted 2 hours ago
Similar jobs that could be interesting for youBased on the Self-Driving Systems Diagnostics & Calibration Specialist in Winnipeg, MB vacancy
- Pursue a career as a Self-Driving Systems Specialist focused on the calibration, diagnostics, and support of autonomous vehicle technologies. This role is pivotal for advancing robotaxi operations. We are looking for candidates with a minimum of three years in automotive electronics...Suggested
$115k - $164.6k per year
...mobility, creating innovative solutions that drive us closer to a world with Zero Crashes,... ...Congestion. As a Senior Body Controls Calibration Specialist, you’ll play a critic This is a high... ..., reliable, and high-quality vehicle systems. The Body Controls Calibration and...Suggested- CoolIT Systems, an Ecolab Company based in Calgary, Canada, seeks a mid- to senior-level Calibration Technician to lead calibration activities and maintain measurement equipment across the organization. You will develop procedures, manage schedules and records, and mentor junior...Suggested
- ...organizations. Position Overview Shared Health Diagnostic Services is responsible for the... ...leadership capabilities. The provincial health system in Manitoba has adopted the LEADS in a... ...encouraged to apply and to voluntarily self-identify as being of Indigenous descent in...SuggestedWork at officeImmediate startShift work
- Lead instrumentation calibration and equipment troubleshooting across production, laboratory, and building systems. Work with automates, programming languages, and GMP requirements.The Instrumentation & Control Specialist calibrates production and building-related equipment...Suggested
- ...leading provider of real-time power simulation systems, catering to utilities, research... ...energy applications. If you’re excited about driving innovation and enhancing the reliability... ...field! Job Summary: The Simulation Specialist/Engineer at RTDS Technologies Inc. will...Summer workImmediate start
$90k - $100k per year
...adjustments to meet customer production needsMaintain our master calibration equipment: master list, calibration dates, repairs, service... ...processing equipmentHands‑on skill with mechanical fluidics (spray systems, pumps, air handling) and PLC control loop tuningExperience...Hourly payFull time- Lead body controls calibration and system testing for General Motors in a hybrid Markham role requiring onsite work three times weekly. Apply advanced... ...and validation skills.As a Senior Body Controls Calibration Specialist, you will own technical solutions from requirements through...
- Advance Diagnostic Imaging access through coordinated workflows, project leadership, and education... ...healthcare stakeholders.The Program Specialist provides specialized program, project, and... ...guide implementation, change management, system optimization, and practical learning...
- ...for robotics and embodied AI. You will own camera and camera–IMU calibration from algorithms to production, turning precise laboratory... ...a growing fleet of real hardware. You will develop calibration systems, validate accuracy on real hardware, and create automated stations...
- Become a Self-Driving Systems Specialist focused on technology and support for autonomous vehicles. Your expertise in diagnostics and calibration will enhance performance across North America’s robotaxi fleets. This role seeks individuals with a minimum of 3 years in automotive...
- Apply advanced automotive diagnostics in a full-time, field-based role supporting dealerships and repairers across complex vehicle issues.... ...expertise.MSX International seeks an experienced automotive diagnostic specialist to become an escalation point for difficult repairs. You will...Full timeRemote work
- ...computing environments.We are seeking an experienced Senior Calibration Technician / Calibration Specialist to join our team. This is a mid- to senior-level... ...the organization, maintaining calibration records and systems, supporting equipment traceability, and ensuring calibration...Casual workFlexible hours
- ...support to all of the modalities within the Diagnostic Imaging department including: ensuring... ...experience using the Radiology Information System (RIS), Electronic Patient Record (EPR), e-... ...are encouraged to apply and to voluntarily self-identify as being of Indigenous descent in...Work at officeShift workWeekend workAfternoon shift
- About Daedal SystemsDaedal Systems is a plasma diagnostic company for the fusion energy industry. Today, every fusion company needs the same R&D plasma... ..., procurement, build, test, installation, commissioning, calibration, operation, and maintenanceExperience developing detailed...InternshipRelocationRelocation package
$77.4k - $97.97k per year
Job Title Mechanical Systems Specialist Job Type Permanent Union MRSA Position Classification... ...Royal University is known for our top-calibre programs, high-quality teaching and... ...and committed employees are the driving force behind student success. We strive...Long term contractPermanent employmentFull timeContract workPart timeFor contractorsLocal areaMonday to fridayShift work- ...embodied AI.We design and operate global systems for data capture, data labeling, and hardware... .... About the RoleYou will build the calibration systems that let Mecka capture the... ...geometry, strong software skills, and the drive to turn precise laboratory results into reliable...
- ...that has been recognized as the leading calibration and compliance services provider in North... ...skills Excellent attention to detail Self-motivated learner with the ability to... ...independently and as part of a team 3+ years driving experience with a valid driver’s license...Work at office
- Precision Drilling is seeking a Power Systems Mechanic to inspect, diagnose, repair, and overhaul heavy-duty diesel engines and related... ...experience with diesel engines, completion of a diesel or related technical program, and proficiency with OEM diagnostic tools. #J-18808-Ljbffr
$160k - $200k per year
...embodied AI. We design and operate global systems for data capture, data labeling, and... ...hardware. About The RoleYou will build the calibration systems that let Mecka capture the... ...geometry, strong software skills, and the drive to turn precise laboratory results into reliable...$85.17k - $93k per year
...a real difference within life sciences, diagnostics and biotechnology? Bring more to life.... ...viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn... ...possible. The Quality Systems Specialist supports the maintenance and continuous...$65k - $75k per year
A growing eCommerce logistics company in Toronto is seeking an Events & ABM Specialist to drive growth through high-impact events and account-based marketing. You will manage event logistics and support revenue goals while collaborating closely with the marketing and sales...Remote work- Ça vous allume de mettre au point les moteurs de demain ? Rejoignez une équipe passionnée et prenez les commandes de projets de calibration sur des produits innovants. Votre terrain de jeu Piloter vos projets de calibration moteur 4 temps, sur le plan technique comme...
- ...embodied AI.We design and operate global systems for data capture, data labeling, and hardware... ...'re looking for a hands‑on Senior SLAM & Calibration Engineer to own how Mecka's devices stay... ...the monocular wrist‑cam path, and drive it against real benchmarks. Monitor the...Local area
$104.52k per year
...all qualified candidates and encourages Indigenous persons to self‑declare when submitting their applications. KEY RESPONSIBILITIESReporting... ...Planning, Integration & Geospatial Services, the GIS Systems Specialist provides complex project and technical support for the City's...Local area- Support aerospace test programs with hands-on calibration, sensor, and measurement expertise at Safran Landing Systems in Ajax, Ontario.As a Test Instrumentation and Metrology Technologist, you will support structural and servo-hydraulic testing throughout product programs....Full time
- Advance silicon-based quantum processors through spin qubit calibration, Python automation, and device optimization in an international location... ...Engineer, you will calibrate and fine-tune spin qubit systems for stronger gate fidelities, coherence times, and device performance...
- ...results-driven Security Project Specialist for our Capital Projects team,... ...for installing, programming, system start-up/check-out,... ...of 10 Values and Beliefs which drive our unmatched culture, making... ...look for solutions. Must be a self-starter and work well without...Full timeInternshipLocal areaWork from homeWorldwideNight shift
- Join De Havilland Aircraft as a Calibration Technician, promoting quality in aircraft assembly in Calgary, AB. Ensure accuracy and compliance... ...coordination • Update calibration documentation and recall systems • Manage user notifications and equipment scheduling • Support...
- We are seeking a highly skilled and motivated Spin Qubit Calibration Engineer to join our cutting‑edge research and development team in one... ...to the performance and scalability of quantum computing systems. Experience and QualificationsIf you are a highly motivated...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Self-Driving Systems Diagnostics & Calibration Specialist. Be the first to apply!
Related searches
- delivery specialist Winnipeg, MB
- asset management specialist Winnipeg, MB
- configuration management specialist Winnipeg, MB
- credit specialist Winnipeg, MB
- building performance specialist Winnipeg, MB
- fire specialist Winnipeg, MB
- spécialiste en amélioration continue Winnipeg, MB
- deployment specialist Winnipeg, MB
- solution specialist Winnipeg, MB
- spécialiste talent Winnipeg, MB

