Specialist Engineer - Mechanical Equipment
AtkinsRéalis Group
OverviewAtkinsRéalis is hiring a Senior Equipment Engineer Specialist to support engineering services for Nuclear Power Plants in a matrix organization.
Your role
Provide mechanical and equipment engineering support with the preparation of technical deliverables, including technical specifications, test procedures, commissioning plans, and registration design submissions for NPP components and mechanical systems.
Perform conceptual and detail design activities for mechanical systems, including flow sheets, detail drawings, equipment arrangement/layouts, and sizing and selection of mechanical components for nuclear steam plants.
Coordinate large‑scale projects of considerable technical and commercial complexity.
Support manufacturing, assembly, testing, and commissioning tasks.
Review design reports, analysis reports, calculations, documents, and drawings for design verification.
Define project scope, monitor and report progress, and communicate with clients.
Interface with other engineering disciplines to obtain data and resolve design issues.
Conduct technical, conceptual, and detail design meetings with peers, clients, and suppliers.
Provide pre‑order and post‑order engineering support, including review of client requirements, applicable documents, codes and standards, cost estimating, proposal preparation, and review of engineering quotation requests and technical evaluations.
Guide drafting staff and oversee interfacing disciplines.
Conduct site visits at nuclear generating stations and suppliers.
Assist quality surveillance, manufacturing, assembly, and testing with non‑conformances.
Review and approve suppliers’ capabilities to fabricate required components within applicable requirements.
Evaluate the completeness and status of delivered equipment.
Work in accordance with applicable codes, standards, regulations, and company procedures.
Consult on and approve engineering quotation packages and purchase requisitions.
Assist other engineers and branch manager with daily engineering activities.
About You
Engineering degree from an accredited university in Mechanical, Chemical, Nuclear Engineering or Engineering Science.
Specialist in one type of equipment or component.
Registered Professional Engineer in a Canadian province, qualified to seal mechanical and chemical engineering documents.
Minimum 15 years of experience, including at least 5 years as a Senior Design Engineer in the nuclear industry, in mechanical design of industrial machines, automation equipment, or equipment engineering with knowledge of pumps, fans, motors, valves, heat exchangers, steam generators, pressure vessels, etc.
Experience working in or performing design work for a nuclear facility licensed in Canada or outside Canada.
Specific knowledge of pressure vessels, valves, ventilation systems applicable to nuclear power stations.
Working knowledge of nuclear pressure boundary codes and standards, including CSA N285.0 and ASME Sections III.
Solid understanding of equipment sizing, selection, and troubleshooting.
Strong written and oral communication skills.
Willingness to travel and potentially work onsite as required.
Additional, Preferred Qualifications
Qualification as a Specialized Professional Engineer to ASME Section III Appendix XXIII within the last five years.
Experience with CSA B51, ANSI B31.1, ASME Section VIII, and other nuclear‑plant applicable standards or regulatory guides.
Knowledge of pressure boundary work, including design, analysis, code classification, and non‑destructive examination.
Knowledge of ASME Y14.5 dimensioning and tolerancing.
Knowledge of seismic and environmental qualification methods.
Presentation and public speaking skills.
Rewards & BenefitsCompetitive compensation, employee recognition, flexible benefits that can be tailored to health, wellbeing, financial and lifestyle needs, and training and professional development opportunities. Hybrid working culture and generous time‑off policies are also available.
EEO & AccommodationAppropriate accommodation will be provided upon request throughout the recruitment and hiring process as required by Company policy and the Accessibility for Ontarians with Disabilities Act (AODA). Successful applicants will be notified about accommodation policies at the time the employment offer is extended, and information will be shared with new personnel during onboarding.
#J-18808-Ljbffr
Your role
Provide mechanical and equipment engineering support with the preparation of technical deliverables, including technical specifications, test procedures, commissioning plans, and registration design submissions for NPP components and mechanical systems.
Perform conceptual and detail design activities for mechanical systems, including flow sheets, detail drawings, equipment arrangement/layouts, and sizing and selection of mechanical components for nuclear steam plants.
Coordinate large‑scale projects of considerable technical and commercial complexity.
Support manufacturing, assembly, testing, and commissioning tasks.
Review design reports, analysis reports, calculations, documents, and drawings for design verification.
Define project scope, monitor and report progress, and communicate with clients.
Interface with other engineering disciplines to obtain data and resolve design issues.
Conduct technical, conceptual, and detail design meetings with peers, clients, and suppliers.
Provide pre‑order and post‑order engineering support, including review of client requirements, applicable documents, codes and standards, cost estimating, proposal preparation, and review of engineering quotation requests and technical evaluations.
Guide drafting staff and oversee interfacing disciplines.
Conduct site visits at nuclear generating stations and suppliers.
Assist quality surveillance, manufacturing, assembly, and testing with non‑conformances.
Review and approve suppliers’ capabilities to fabricate required components within applicable requirements.
Evaluate the completeness and status of delivered equipment.
Work in accordance with applicable codes, standards, regulations, and company procedures.
Consult on and approve engineering quotation packages and purchase requisitions.
Assist other engineers and branch manager with daily engineering activities.
About You
Engineering degree from an accredited university in Mechanical, Chemical, Nuclear Engineering or Engineering Science.
Specialist in one type of equipment or component.
Registered Professional Engineer in a Canadian province, qualified to seal mechanical and chemical engineering documents.
Minimum 15 years of experience, including at least 5 years as a Senior Design Engineer in the nuclear industry, in mechanical design of industrial machines, automation equipment, or equipment engineering with knowledge of pumps, fans, motors, valves, heat exchangers, steam generators, pressure vessels, etc.
Experience working in or performing design work for a nuclear facility licensed in Canada or outside Canada.
Specific knowledge of pressure vessels, valves, ventilation systems applicable to nuclear power stations.
Working knowledge of nuclear pressure boundary codes and standards, including CSA N285.0 and ASME Sections III.
Solid understanding of equipment sizing, selection, and troubleshooting.
Strong written and oral communication skills.
Willingness to travel and potentially work onsite as required.
Additional, Preferred Qualifications
Qualification as a Specialized Professional Engineer to ASME Section III Appendix XXIII within the last five years.
Experience with CSA B51, ANSI B31.1, ASME Section VIII, and other nuclear‑plant applicable standards or regulatory guides.
Knowledge of pressure boundary work, including design, analysis, code classification, and non‑destructive examination.
Knowledge of ASME Y14.5 dimensioning and tolerancing.
Knowledge of seismic and environmental qualification methods.
Presentation and public speaking skills.
Rewards & BenefitsCompetitive compensation, employee recognition, flexible benefits that can be tailored to health, wellbeing, financial and lifestyle needs, and training and professional development opportunities. Hybrid working culture and generous time‑off policies are also available.
EEO & AccommodationAppropriate accommodation will be provided upon request throughout the recruitment and hiring process as required by Company policy and the Accessibility for Ontarians with Disabilities Act (AODA). Successful applicants will be notified about accommodation policies at the time the employment offer is extended, and information will be shared with new personnel during onboarding.
#J-18808-Ljbffr
Vacancy posted 34 minutes ago
Similar jobs that could be interesting for youBased on the Specialist Engineer - Mechanical Equipment in Winnipeg, MB vacancy
- ...envelope trade contractor in the institutional, commercial and industrial construction marketplace is looking for a Small Engine and Equipment Mechanic to work from our Winnipeg location. A Day In The Life Performing scheduled maintenance service, such as oil changes,...MechanicalFull timeFor contractors
- ...the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle... ...to more sustainable solutions. PurposeThe Principal Mechanical Engineer – Static Equipment is a senior technical authority and subject matter expert...Mechanical
- Job Description - Specialist Mechanical Engineer - Fired Equipment (CAL01SD) Specialist Mechanical Engineer - Fired Equipment - CAL01SD Company : Worley Other LocationsCAN-AB-Edmonton JobMechanical ScheduleFull-time Employment Type : Employee Job PostingJul...MechanicalLong term contractImmediate start
- Job Description - Specialist Mechanical Engineer - Rotating Equipment (CAL01YX) Specialist Mechanical Engineer - Rotating Equipment - CAL01YX Company : Worley Other LocationsCAN-AB-Edmonton JobMechanical ScheduleFull-time Employment Type : Employee Unposting...MechanicalOverseas
- Job Description - Specialist Mechanical Engineer - Heat Transfer Equipment (CAL01R4) Specialist Mechanical Engineer - Heat Transfer Equipment - CAL01R4 Company : Worley Location: CAN-AB-Edmonton Building on our past. Ready for the future Worley is a global professional...MechanicalImmediate start
- ...grow, we are currently seeking candidates for a Ground Service Equipment Mechanic based in Winnipeg, MB. This career is a part of the overall... ...from GSE as required. Repair and maintain diesel, and small engine equipment. Shop upkeep including cleaning, parts storage, inventory...MechanicalFull timeWork at officeLocal areaFlexible hoursShift work
- Apply mechanical engineering expertise to industrial equipment, inspections, layouts, and technical documentation with Worley in Vancouver.This intermediate position... ..., vendors, subcontractors, and senior technical specialists.Key Responsibilities: Perform conceptual design...MechanicalFor subcontractor
- Apply mechanical design expertise to static, rotating, and packaged equipment for HOCS Projects' Calgary-based energy engineering work.This Senior Mechanical Engineer leads equipment-focused scopes within multi-disciplinary energy projects. You will establish design criteria...Mechanical
- Shape industrial process equipment for Saltworks Technologies, integrating pumps, vessels, piping, and instruments in Richmond’s onsite engineering environment.This Mechanical Engineer position focuses on modular equipment for advanced water treatment and lithium refining systems...Mechanical
- ...products, projects, and operations. Join us and build skills defining the next era of engineering and industrial systems. The role: Join our team as a Mechanical Engineer - Modular Equipment and design the factory-built process modules and tanks at the core of our...MechanicalInternshipShift work
$75 - $90 per hour
...About the job:Kent is looking for a Senior Mechanical Engineer – Rotating to join our engineering team... ..., and procuring rotating mechanical equipment for industrial projects. Working... ...including the ability to identify when specialist assessment is required. Experience in...MechanicalHourly payFull timeContract workInternshipWork at officeRelocationFlexible hours- ## Specialist Engineer - MechanicalApply: CA.ON.Mississauga.2251 Speakman Drive: Full time: Posted... ...AtkinsRéalis is looking to hire a Senior Mechanical Engineer. This position requires... ...ASME B31.1.* Experience in power plant equipment, including but not limited to equipment...MechanicalFull timeInternshipFlexible hours
$150k - $170k per year
Reports to: Engineering Manager Job Type: Full-Time, Permanent, 40HRs/WK Location... ...PURPOSE OF THIS JOBWe are seeking a Specialist Mechanical Engineer to deliver expert technical... ...: Perform and review calculations, equipment selection and system layouts; conduct...- Lead mechanical design for chutes, conveyors, vessels, and industrial equipment at WSP. Support mining projects across Canada from an office location, ideally eastern Canada.This Lead Mechanical Engineer role combines equipment design, multidisciplinary coordination, and construction...MechanicalWork at office
- ...About the Role Our client, a leading manufacturer and supplier of specialized mining equipment, is seeking a motivated Mechanical Engineer to join their dynamic team in Kimberley . This role focuses on the design, development, and continuous improvement of robust and reliable...Mechanical
- Design hydroelectric equipment for BC Hydro’s generation assets as a Senior Mechanical Engineer, applying mechanical engineering and project leadership expertise.Working in the Heavy Equipment Team, you will support water retention, water conveyance, and power generation projects...MechanicalImmediate start
- Mechanical design expertise drives mining and heavy industrial projects for Sedgman in Vancouver, British Columbia. Apply process equipment, platework, and piping knowledge across project stages.This Mechanical Engineer develops designs from conceptual studies through completion...MechanicalInternship
$75 - $90 per hour
...or disability. About the jobKent is looking for a Senior Mechanical Engineer – Static to join our engineering team in our Sarnia, Ontario,... ...specifying, selecting, reviewing, and procuring static mechanical equipment for industrial projects. Working closely with...MechanicalHourly payRemplacementFull timeContract workInternshipWork at officeRelocationFlexible hours- Shape the future of energy projects as a Senior Rotating Equipment Mechanical Engineer. Utilize your extensive design skills to enhance machinery performance and project efficiency. In this dynamic role, you'll engage in the design and evaluation of rotating equipment for...Mechanical
- ...IKO Industries Ltd. in Brampton, ON is seeking a Mechanical Design Engineer to join our engineering team. You will design equipment, layout plant and piping, and collaborate with project engineers on multiple initiatives. The ideal candidate has 5+ years of mechanical equipment...Mechanical
$39.25 per hour
...is no option to work remotely. Responsibilities Tasks Diagnose faults or malfunctions using computerized and other testing equipment to determine extent of repair required Order parts and maintain inventory Adjust equipment and repair or replace defective parts...Permanent employmentFull timeRemote work- ...AtkinsRéalis. AtkinsRéalis is dedicated in engineering a better future for our planet and its... ...of the program as it relates to mechanical systems design and construction including... ...Knowledge of Combustion, Fuel, Rotating Equipment, Mechanical Systems, Industrial Machinery...MechanicalFor contractorsInternshipWork at officeFlexible hours
- ...As our Intermediate Mechanical Engineer , you'll turn ideas into practical, production-ready designs. You'll take a hands-on role in designing... ...which we will move into in May 2027, along with enhanced R&D equipment, tooling, technology, and infrastructure that strengthen our...MechanicalLong term contract
- ...energy, chemicals and resources needed now. The Senior Mechanical Engineer – HVAC will be based in either Calgary, AB or Edmonton, AB... ...design deliverables including design criteria, specifications, equipment data sheets, material requisitions, bid evaluations, and...Mechanical
- Elevate your career with Worley as a Specialist Mechanical Engineer in Turbomachinery, based in Edmonton, Alberta. You will provide expert technical... ...role demands extensive expertise in high-speed rotating equipment including compressors and turbines, as you lead engineering...Mechanical
- Job Description - Specialist Mechanical Engineer - Turbomachinery (CAL01QU) Specialist Mechanical Engineer - Turbomachinery - CAL01QU Company:... ...-level subject matter expert (SME) in high-speed rotating equipment, including compressors, steam and gas turbines, expanders,...MechanicalRemplacementLong term contractImmediate start
- ...Lead to support project execution, delivering cost-competitive engineering services and guiding assigned teams through design, procurement... ...related experience, strong communication, and the ability to develop equipment data sheets and support on-site start-up activities. #J-18808...Mechanical
- Worley is seeking a Principal Mechanical Engineer – Static Equipment to lead the static equipment discipline on major capital projects and brownfield scopes in the energy sector. You will set technical direction, govern quality, and solve high-complexity challenges across pressure...Mechanical
$114.8k - $157.85k per year
...Job Description Senior Mechanical Engineer Are you looking for a company that works on major engineering projects all over the world? Do you want to make a difference by improving the daily lives of communities worldwide? Are you seeking to join an inclusive and diverse...MechanicalFull timeWork at officeWorldwideFlexible hours- Worley is seeking a Principal Mechanical Engineer – Static Equipment to provide strategic leadership on static equipment across major projects. You will guide design, analysis, and lifecycle decisions, ensuring compliance with ASME, API, CSA and related standards while mentoring...Mechanical
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Specialist Engineer - Mechanical Equipment. Be the first to apply!
Related searches
- delivery specialist Winnipeg, MB
- asset management specialist Winnipeg, MB
- configuration management specialist Winnipeg, MB
- credit specialist Winnipeg, MB
- building performance specialist Winnipeg, MB
- fire specialist Winnipeg, MB
- spécialiste en amélioration continue Winnipeg, MB
- deployment specialist Winnipeg, MB
- solution specialist Winnipeg, MB
- spécialiste talent Winnipeg, MB

