Mechanical Engineer
The Valtech Group
Reporting to the Vice President, Projects and Estimating, the Project Engineer is responsible for the analysis, validation, and technical follow-up of assigned projects. The Project Engineer works closely with Project Managers, Drafters, and fabrication teams to ensure that drawings, calculations, and technical documentation comply with client requirements, applicable codes and standards, and manufacturing requirements. The Project Engineer also acts as a technical resource, supporting the resolution of issues that arise during production and contributing to the achievement of quality, cost, and schedule objectives.
Reporting to the Vice President, Projects and Estimating, the Project Engineer is responsible for the analysis, validation, and technical follow-up of assigned projects. The Project Engineer works closely with Project Managers, Drafters, and fabrication teams to ensure that drawings, calculations, and technical documentation comply with client requirements, applicable codes and standards, and manufacturing requirements. The Project Engineer also acts as a technical resource, supporting the resolution of issues that arise during production and contributing to the achievement of quality, cost, and schedule objectives.
Key Responsibilites:
Review client documentation, including drawings, specifications, and technical requirements, and identify any inconsistencies or conflicting information.
Perform the technical calculations required to validate drawings, including calculations in accordance with ASME Section VIII, Division 1, ASME B31.3, and lifting calculations.
Review and revise fabrication drawings and weld maps prepared by Drafters based on applicable codes, specifications, and reference drawings.
Recommend technical solutions and adjustments to ensure the manufacturability of projects.
Respond to clients’ technical inquiries and ensure thorough follow-up on technical matters.
Collaborate with Project Managers and production teams to optimize quality, costs, and project timelines.
Ensure that pre-production schedules are met and participate in planning departmental activities.
Provide technical support throughout the fabrication process, including the management of non-conformities, rework, and required adjustments.
Ensure compliance with applicable codes and standards, client requirements, and the company’s quality standards.
Education and Experience Requirements:
University degree in Mechanical Engineering.
Member of the Ordre des ingénieurs du Québec (OIQ).
Excellent proficiency in both French and English, written and spoken.
5 to 10 years of experience in metal fabrication or custom manufacturing.
Technical Skills:
Proficiency with technical drawing and design software, including AutoCAD and Inventor.
Excellent knowledge of welding, assembly, and metal fabrication processes.
Strong knowledge of ASME Section VIII, Division 1.
Ability to perform complex technical calculations and interpret detailed drawings and specifications.
Professional Skills:
Thoroughness and strong attention to detail.
Excellent organizational skills and ability to effectively manage priorities.
Ability to work under pressure and meet tight deadlines.
Strong analytical skills and ability to solve complex technical problems.
Excellent communication skills when working with clients and internal teams.
Proactive and results-oriented mindset.
Most importantly, demonstrates and embodies our company values:Humanity
Collaboration
Passion
Integrity
Working Conditions:
Permanent, full-time position on the day shift;
Competitive salary based on experience;
Group insurance;
Group RRSP with employer contribution;
Telemedicine;
Employee and Family Assistance Program (EFAP);
Company cell phone provided;
Non-unionized work environment.
#J-18808-Ljbffr
Reporting to the Vice President, Projects and Estimating, the Project Engineer is responsible for the analysis, validation, and technical follow-up of assigned projects. The Project Engineer works closely with Project Managers, Drafters, and fabrication teams to ensure that drawings, calculations, and technical documentation comply with client requirements, applicable codes and standards, and manufacturing requirements. The Project Engineer also acts as a technical resource, supporting the resolution of issues that arise during production and contributing to the achievement of quality, cost, and schedule objectives.
Key Responsibilites:
Review client documentation, including drawings, specifications, and technical requirements, and identify any inconsistencies or conflicting information.
Perform the technical calculations required to validate drawings, including calculations in accordance with ASME Section VIII, Division 1, ASME B31.3, and lifting calculations.
Review and revise fabrication drawings and weld maps prepared by Drafters based on applicable codes, specifications, and reference drawings.
Recommend technical solutions and adjustments to ensure the manufacturability of projects.
Respond to clients’ technical inquiries and ensure thorough follow-up on technical matters.
Collaborate with Project Managers and production teams to optimize quality, costs, and project timelines.
Ensure that pre-production schedules are met and participate in planning departmental activities.
Provide technical support throughout the fabrication process, including the management of non-conformities, rework, and required adjustments.
Ensure compliance with applicable codes and standards, client requirements, and the company’s quality standards.
Education and Experience Requirements:
University degree in Mechanical Engineering.
Member of the Ordre des ingénieurs du Québec (OIQ).
Excellent proficiency in both French and English, written and spoken.
5 to 10 years of experience in metal fabrication or custom manufacturing.
Technical Skills:
Proficiency with technical drawing and design software, including AutoCAD and Inventor.
Excellent knowledge of welding, assembly, and metal fabrication processes.
Strong knowledge of ASME Section VIII, Division 1.
Ability to perform complex technical calculations and interpret detailed drawings and specifications.
Professional Skills:
Thoroughness and strong attention to detail.
Excellent organizational skills and ability to effectively manage priorities.
Ability to work under pressure and meet tight deadlines.
Strong analytical skills and ability to solve complex technical problems.
Excellent communication skills when working with clients and internal teams.
Proactive and results-oriented mindset.
Most importantly, demonstrates and embodies our company values:Humanity
Collaboration
Passion
Integrity
Working Conditions:
Permanent, full-time position on the day shift;
Competitive salary based on experience;
Group insurance;
Group RRSP with employer contribution;
Telemedicine;
Employee and Family Assistance Program (EFAP);
Company cell phone provided;
Non-unionized work environment.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Mechanical Engineer in Winnipeg, MB vacancy
$39.25 per hour
Overview Languages English Education ~ Other trades certificate or diploma Experience 3 years to less than 5 years On site Work must be completed at the physical location. There is no option to work remotely. Responsibilities Tasks Diagnose...SuggestedPermanent employmentFull timeRemote work- ...reshaping the future with AtkinsRéalis. AtkinsRéalis is dedicated in engineering a better future for our planet and its people. Your role... ...planning, design, and delivery of the program as it relates to mechanical systems design and construction including compliance with all...SuggestedFor contractorsInternshipWork at officeFlexible hours
- ...envelope trade contractor in the institutional, commercial and industrial construction marketplace is looking for a Small Engine and Equipment Mechanic to work from our Winnipeg location. A Day In The Life Performing scheduled maintenance service, such as oil changes,...SuggestedFull timeFor contractors
- ...As our Junior Mechanical Engineer , you'll build your engineering career by working hands-on with mechanical products from design and prototyping through testing and production. You'll support mechanical design assignments, create and refine designs, build and evaluate...SuggestedLong term contractFull timeInternship
- ...Aerospace Engine Mechanic Training Program (GTRO) Winnipeg, Manitoba Build an Aviation Career You’re Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done...SuggestedLong term contractTemporary workTraineeshipSecond job
$52.88k - $77.55k per year
Dematic Canada is seeking a talented Junior Mechanical Engineer to join our Canadian Mechanical Engineering team. The Mechanical Engineering team performs engineering assignments with clear and specified objectives while on multi-discipline project teams. The ideal candidate...Local areaWorldwide$110.48k - $151.91k per year
...opportunities to reach your full potential in an environment that’s engineered for people. At CIMA+, we care about our people and make sure... ...(minimum 10 years) to contribute to a mature but growing mechanical team in Calgary. This opportunity will require extensive experience...Permanent employmentInternshipWork at officeWork from homeFlexible hours$80k - $100k per year
...enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and... .... For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year,...Worldwide$75.8k - $109.9k per year
...communities into the future—join us!Your Opportunity An opportunity exists Windsor, ON for a highly motivated Intermediate Mechanical Engineer to join our multidisciplinary team. In this role you will be responsible for the design and execution of projects ranging in size...Permanent employmentFull timeContract workFor contractors- Job Description - Mechanical Engineer (CAL01ZA) Mechanical Engineer - CAL01ZA Company : Worley JobMechanical ScheduleFull-time Employment Type : Employee Unposting DateOngoing Reporting Manager Title : Department Manager, Mechanical Engineering Other...Work at office
- Reporting to the President, the mechanical engineer participates in various mechanical engineering projects for various mining clients of Turgeon Mines Experts.JOB DESCRIPTION Are you passionate about project management, work estimation, resource coordination, drafting of...Work at office
- Do you enjoy leading technical projects and tackling complex mechanical challenges? Do you enjoy analyzing, calculating, and guiding engineering choices as much as coordinating stakeholders to bring a project to commissioning?As part of the Groupe Paco development team, you...InternshipWork from homeFlexible hours
- Designs or studies mechanical modification to oil processing, oil handling and utilizes facilities. Execute capital projects according to... ...and budget. Responsibility for project development: preliminary engineering to detail designs to construction and the final and safe...For contractors
- Our client, a well-established Canadian consulting engineering firm, is seeking a Mechanical Engineer to support the continued growth of its district energy and low-carbon thermal infrastructure practice in Ontario. This is an Ontario-based remote position suited...Remote workFlexible hours
$90k - $125k per year
...from one of our office locations because we believe flexibility, trust, and collaboration drive great results.We are seeking a Mechanical Engineer who will work with members of the engineering team in order to develop engineering design solutions appropriate to the context,...Work at officeRemote workWork from homeFlexible hours- ...80 80 per Hour Location Vancouver Job type Contract Discipline Mining & Metals Reference 170469 Job Function Mechanical Engineer Our client, a major resource development organization is seeking a MECHANICAL ENGINEER (Intermediate/Senior) to support...Hourly payContract workWork at office
- Mechanical EngineerAkkodis Greater Toronto and Hamilton Area, Ontario, Canada Join our team as a Mechanical Engineer, working closely with the Owner’s Team and contractors to ensure technical accuracy, compliance, and successful project delivery. Responsibilities...For contractors
$96k - $132k per year
JOB DESCRIPTIONThe Mechanical Engineer plays a vital role in driving RRL's engineering capabilities and innovations. The engineer will be involved in various key areas, including design, analysis, research, and development, while upholding the highest standards of safety and...- The opportunityAre you an experienced Mechanical Engineer looking to take the next step in your career while helping establish a new office in Vancouver? BPA is expanding, and our new Vancouver office offers a unique opportunity to combine the energy and influence of...Work at officeLocal area
- ...Role: We are looking for a candidate who can lead and execute mechanical projects and work in areas of advanced microwave, millimeter wave... ...to design standards and support design reuse. Evaluate engineering approaches and risks to produce and iterate development plans...
- ...research into the feasibility, design, operation and performance of mechanisms, components and systemsDesign power plants, machines and... ...machinery and systemsSupervise technicians, technologists and other engineers and review and approve designs, calculations and cost...Remote work
- ...mining operations, and other critical infrastructure clients.As a Mechanical Engineer, you will lead the mechanical scope and design for power... ...infrastructure is considered an asset.Knowledge of natural-gas engine-generator systems and associated mechanical systems is considered...For contractorsFor subcontractorWork at officeLocal areaWorldwide
- TSG STAFFING SERVICES is currently recruiting for a MECHANICAL ENGINEER (INTERMEDIATE) for an Edmonton area-based opportunity to work in an operating plant environment.Job Description: Supporting major projects, optimization for plant and project implementationDesign...Remplacement
$120k - $165k per year
...ship work here, it ends up on the wrists of people doing some of the world's most dangerous jobs. ABOUT THE ROLEWe're hiring a Mechanical Engineer to own all mechanical aspects of every Proxxi product, current and future. This is a hands-on individual contributor role: you'...Full timeContract workFor contractorsManual laborWork at officeWorldwide$80k - $85k per year
About This Role This role within the Engineering/Product Development Team is focused on electromechanical design and packaging for the... ...among others.This position provides individual contributor within Mechanical Engineering. Responsible to observe and implement technical...Work at officeRemote work$99k - $122k per year
...driven by purpose and powered by brilliant people. As a trusted engineering, management, and development consultancy, we work with clients... ...succeed.Mott MacDonald is currently seeking a highly motivated Mechanical Engineer to join our dynamic team of professionals in our Toronto...InternshipWork at office3 days per week$80k - $110k per year
...critical assets. Backed by Blackstone, one of the world’s largest private equity firms, DarkVision’s team of Software, Mechanical, and Machine Learning Engineers and Data Analysts is rapidly expanding to meet the demand for the company’s current and upcoming products. Our...Full timeContract work- Job Description Overview AtkinsRéalis is growing and our Western Canadian Engineering group is seeking a Mechanical Engineer to join our growing team in Calgary. This role supports the execution of a wide variety of projects across the country by applying industry standard...For subcontractorInternshipWork at officeLocal areaFlexible hours
- About CoLabAt CoLab, we help mechanical engineering teams bring life-changing products to market years sooner. At CoLab, we help mechanical engineering teams bring life-changing products to market years sooner. CoLab is the AI platform for driving stronger product development...Permanent employmentFull timeRemote work1 day per week
- ...and sleep industries.Job Description Reporting to the VP of Engineering, you will be responsible for the design, development, and transfer... ...Experience in modelling and production processesDevelopment of mechanical drawings using CAD software such as NX, SolidWorks, Fusion360,...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Mechanical Engineer. Be the first to apply!
Related searches
- mechanical electrical Winnipeg, MB
- mechanical commissioning Winnipeg, MB
- mechanical inspector Winnipeg, MB
- mechanical project coordinator Winnipeg, MB
- mechanical engineer hvac Winnipeg, MB
- mechanical superintendent Winnipeg, MB
- mechanical eit Winnipeg, MB
- mechanical piping superintendent
- mechanical electrical
- mechanical commissioning

