Manufacturing Engineer
North Vector Dynamics Inc.
Who We AreNorth Vector Dynamics is a Canadian-owned and controlled defence technology company specializing in precision interception, autonomy, and advanced propulsion. NVD is building a full-spectrum missile capability, from counter-UAS solutions to hypersonics, designed to serve and defend NATO member states and their allies and partners.
About the RoleNorth Vector Dynamics is building next-generation defence systems, and the CM70 is moving from prototype builds to a controlled, repeatable production line in a new Calgary manufacturing facility. We’re looking for a Manufacturing Engineer to design and build the tools, fixtures, equipment, and production methods that let us make our platforms faster, cheaper, and the same way every time.
Reporting to the Head of Manufacturing directly, you’ll join a small, hands-on team and own the hardware side of how we build: jigs and fixtures, gauging and inspection tooling, additive and machined parts, equipment selection and setup, and the design-for-manufacturability (DFM) loop with our Systems Engineering team. You’ll work closely with our Process Engineer, who owns routings, work instructions, and quality data, so that the process on paper and the tooling on the floor are designed together.
Your first big projects will be helping stand up our new manufacturing space, from layout and equipment moves to commissioning and re-validation, and turning prototype build know-how into production-ready tooling as the CM70 design baseline is frozen.
This is a ground-floor role for someone who is technically rigorous, happiest with their hands on the hardware, and energized by building from a clean sheet rather than inheriting a mature line. You’ll work side by side with our technicians and design engineers, along with senior leadership, and your work will define how North Vector Dynamics builds hardware as we scale.
If you want to build the machines that build platforms which will one day support soldiers in the field, save lives, and serve sovereign national interest - this role was written for you.
What You’ll DoTooling, Fixtures & Equipment
Design, build, and validate assembly jigs, fixtures, gauges, and inspection tooling for the CM70 and future products, so every technician builds and checks the same way, every time.
Specify, source, install, and commission production and test equipment, including additive manufacturing systems, machining, automation, wiring harness, and electronics assembly equipment as we bring more work in-house.
Own our additive manufacturing capability: printer and material selection, print parameters and post-processing, part qualification, and the cost and shelf-life trade-offs that decide what we print versus buy.
Set up calibration and maintenance plans for the tools and equipment you put on the floor, and keep tooling under identification and revision control.
Lead tool control and point-of-use storage: tool check-in and check-out, shadow boards, and workstation layouts that support FOD and ESD control.
Design for Manufacturing & Production Support
Partner with Systems Engineering on DFM and design-for-assembly reviews, BOM and CAD scrubs, tolerance stack-ups, and material and process choices, and feed what we learn on the floor back into the design.
Support the move from prototype to production as the CM70 design is baselined: build readiness, pilot builds, first article inspections, and engineering change cut-ins.
Be the first line of engineering support on the floor: solve build problems in real time, lead root cause analysis on equipment, tooling, and process failures, and drive corrective actions through to closure.
Identify the constraints that limit how many units we can build per cycle (method, machine, material, and manpower) and engineer them out through better tooling, automation, and flow.
Work with Supply Chain on make-versus-buy decisions, supplier technical questions, and qualification of machined, printed, and electronic parts from new and second-source suppliers.
New Facility & Continuous Improvement
Help plan and execute the layout of our new manufacturing space: equipment placement, material flow, utilities, workstation design, and controlled areas for quarantine, calibrated tools, and controlled storage.
Lead equipment moves, commissioning, and re-validation so production restarts at the new site with minimal downtime.
Track cycle time, yield, scrap, and equipment uptime, and lead kaizen, 5S, and line-balancing efforts as volumes increase.
Support our MES and ERP rollouts with tooling, equipment, and station data, and help build processes that meet AS9100 and Controlled Goods Program requirements.
Step into whatever the mission demands: this is a startup, no two weeks will look the same!
What You BringRequired
A bachelor’s degree (minimum) in manufacturing, mechanical, mechatronics, industrial, or aerospace engineering, or an equivalent technical discipline from an accredited program and institution.
3+ years as a manufacturing, tooling, or production engineer in a hardware production environment, with a track record of fixtures, tooling, or equipment you designed and put into service.
Strong CAD skills (Autodesk Inventor/Fusion, SolidWorks, or similar), working within a PDM environment, with the ability to take a fixture from concept to drawing to finished part.
Ability to read, interpret, and create engineering drawings with GD&T, and to run tolerance stack-ups and basic engineering calculations.
Hands‑on experience with additive manufacturing (FDM, SLA, SLS, or similar) and with machined part design, including design for the process.
Experience specifying, installing, and commissioning production equipment, and working with equipment vendors and integrators.
Working knowledge of structured root cause analysis (8D, 5 Whys, fishbone) and lean manufacturing practices (standard work, 5S, kaizen) applied on a real shop floor.
Comfort with data: tracking and presenting cycle time, yield, and equipment metrics in Excel, Power BI, or similar tools.
Comfort working hands‑on: building, adjusting, and troubleshooting tools and equipment yourself, not just designing them.
Eligibility for a Government of Canada security clearance and registration under the Controlled Goods Program;
active clearance is a significant asset.
A builder’s mindset: you take ownership of the system, not just the task, and you’re as comfortable on the floor with a technician as you are in a design review.
Preferred
P.Eng. or EIT designation, or eligibility for registration in Alberta or conversion from an eligible province.
Prior experience in a UAS, aerospace, munitions, or defence manufacturing environment operating under AS9100 or a similar quality management system.
Experience with industrial additive manufacturing systems and engineering materials, including part qualification for end‑use parts.
An electromechanical assembly background: wiring harnesses, PCB handling and ESD control, torque control, adhesives, or composites.
Experience with automation, PLCs, or robotics, and with designing semi-automated assembly or test stations.
Exposure to SMT/PCBA processes, or to energetics or explosives-safe manufacturing practices.
Familiarity with first article inspection (AS9102), PFMEA, control plans, and measurement system analysis.
Experience launching a new production line or facility, or ramping volume in a startup or scale-up.
Lean Six Sigma Green Belt or higher.
Why North Vector Dynamics
Real ownership from day one: the systems and processes you help build will be foundational to how this company operates for years to come.
We’re working on technology that matters at a national and global level, and every person on the team feels that weight and that purpose.
A tight-knit, high-caliber team that moves fast, holds each other to a high standard, and doesn’t waste time on bureaucracy for its own sake.
Competitive compensation and meaningful upside from joining an early-stage company at the forefront of the defence technology sector.
On-site in Calgary, AB, a growing hub for tech and defence, with a culture built around resilience and getting things done.
#J-18808-Ljbffr
About the RoleNorth Vector Dynamics is building next-generation defence systems, and the CM70 is moving from prototype builds to a controlled, repeatable production line in a new Calgary manufacturing facility. We’re looking for a Manufacturing Engineer to design and build the tools, fixtures, equipment, and production methods that let us make our platforms faster, cheaper, and the same way every time.
Reporting to the Head of Manufacturing directly, you’ll join a small, hands-on team and own the hardware side of how we build: jigs and fixtures, gauging and inspection tooling, additive and machined parts, equipment selection and setup, and the design-for-manufacturability (DFM) loop with our Systems Engineering team. You’ll work closely with our Process Engineer, who owns routings, work instructions, and quality data, so that the process on paper and the tooling on the floor are designed together.
Your first big projects will be helping stand up our new manufacturing space, from layout and equipment moves to commissioning and re-validation, and turning prototype build know-how into production-ready tooling as the CM70 design baseline is frozen.
This is a ground-floor role for someone who is technically rigorous, happiest with their hands on the hardware, and energized by building from a clean sheet rather than inheriting a mature line. You’ll work side by side with our technicians and design engineers, along with senior leadership, and your work will define how North Vector Dynamics builds hardware as we scale.
If you want to build the machines that build platforms which will one day support soldiers in the field, save lives, and serve sovereign national interest - this role was written for you.
What You’ll DoTooling, Fixtures & Equipment
Design, build, and validate assembly jigs, fixtures, gauges, and inspection tooling for the CM70 and future products, so every technician builds and checks the same way, every time.
Specify, source, install, and commission production and test equipment, including additive manufacturing systems, machining, automation, wiring harness, and electronics assembly equipment as we bring more work in-house.
Own our additive manufacturing capability: printer and material selection, print parameters and post-processing, part qualification, and the cost and shelf-life trade-offs that decide what we print versus buy.
Set up calibration and maintenance plans for the tools and equipment you put on the floor, and keep tooling under identification and revision control.
Lead tool control and point-of-use storage: tool check-in and check-out, shadow boards, and workstation layouts that support FOD and ESD control.
Design for Manufacturing & Production Support
Partner with Systems Engineering on DFM and design-for-assembly reviews, BOM and CAD scrubs, tolerance stack-ups, and material and process choices, and feed what we learn on the floor back into the design.
Support the move from prototype to production as the CM70 design is baselined: build readiness, pilot builds, first article inspections, and engineering change cut-ins.
Be the first line of engineering support on the floor: solve build problems in real time, lead root cause analysis on equipment, tooling, and process failures, and drive corrective actions through to closure.
Identify the constraints that limit how many units we can build per cycle (method, machine, material, and manpower) and engineer them out through better tooling, automation, and flow.
Work with Supply Chain on make-versus-buy decisions, supplier technical questions, and qualification of machined, printed, and electronic parts from new and second-source suppliers.
New Facility & Continuous Improvement
Help plan and execute the layout of our new manufacturing space: equipment placement, material flow, utilities, workstation design, and controlled areas for quarantine, calibrated tools, and controlled storage.
Lead equipment moves, commissioning, and re-validation so production restarts at the new site with minimal downtime.
Track cycle time, yield, scrap, and equipment uptime, and lead kaizen, 5S, and line-balancing efforts as volumes increase.
Support our MES and ERP rollouts with tooling, equipment, and station data, and help build processes that meet AS9100 and Controlled Goods Program requirements.
Step into whatever the mission demands: this is a startup, no two weeks will look the same!
What You BringRequired
A bachelor’s degree (minimum) in manufacturing, mechanical, mechatronics, industrial, or aerospace engineering, or an equivalent technical discipline from an accredited program and institution.
3+ years as a manufacturing, tooling, or production engineer in a hardware production environment, with a track record of fixtures, tooling, or equipment you designed and put into service.
Strong CAD skills (Autodesk Inventor/Fusion, SolidWorks, or similar), working within a PDM environment, with the ability to take a fixture from concept to drawing to finished part.
Ability to read, interpret, and create engineering drawings with GD&T, and to run tolerance stack-ups and basic engineering calculations.
Hands‑on experience with additive manufacturing (FDM, SLA, SLS, or similar) and with machined part design, including design for the process.
Experience specifying, installing, and commissioning production equipment, and working with equipment vendors and integrators.
Working knowledge of structured root cause analysis (8D, 5 Whys, fishbone) and lean manufacturing practices (standard work, 5S, kaizen) applied on a real shop floor.
Comfort with data: tracking and presenting cycle time, yield, and equipment metrics in Excel, Power BI, or similar tools.
Comfort working hands‑on: building, adjusting, and troubleshooting tools and equipment yourself, not just designing them.
Eligibility for a Government of Canada security clearance and registration under the Controlled Goods Program;
active clearance is a significant asset.
A builder’s mindset: you take ownership of the system, not just the task, and you’re as comfortable on the floor with a technician as you are in a design review.
Preferred
P.Eng. or EIT designation, or eligibility for registration in Alberta or conversion from an eligible province.
Prior experience in a UAS, aerospace, munitions, or defence manufacturing environment operating under AS9100 or a similar quality management system.
Experience with industrial additive manufacturing systems and engineering materials, including part qualification for end‑use parts.
An electromechanical assembly background: wiring harnesses, PCB handling and ESD control, torque control, adhesives, or composites.
Experience with automation, PLCs, or robotics, and with designing semi-automated assembly or test stations.
Exposure to SMT/PCBA processes, or to energetics or explosives-safe manufacturing practices.
Familiarity with first article inspection (AS9102), PFMEA, control plans, and measurement system analysis.
Experience launching a new production line or facility, or ramping volume in a startup or scale-up.
Lean Six Sigma Green Belt or higher.
Why North Vector Dynamics
Real ownership from day one: the systems and processes you help build will be foundational to how this company operates for years to come.
We’re working on technology that matters at a national and global level, and every person on the team feels that weight and that purpose.
A tight-knit, high-caliber team that moves fast, holds each other to a high standard, and doesn’t waste time on bureaucracy for its own sake.
Competitive compensation and meaningful upside from joining an early-stage company at the forefront of the defence technology sector.
On-site in Calgary, AB, a growing hub for tech and defence, with a culture built around resilience and getting things done.
#J-18808-Ljbffr
L'offre d'emploi a été publiée il y a 2 heures
Des emplois similaires qui pourraient vous intéresserBasé sur l'offre Manufacturing Engineer à Winnipeg, MB
- ...Job Description Senior Manufacturing Engineer (Silent-Aire) Build your best future with the Johnson Controls team As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine building performance to serve people, places, and the planet...SuggéréLe monde entier
- ...MANUFACTURING ENGINEERING MANAGER Winnipeg, MB Full-Time and Onsite Carfair Composites is a leader in fibre-reinforced plastic design... ...Anniston, AL, Wausaukee, WI, and Gillett, WI. As a comprehensive manufacturer of engineered composite products, Carfair Composites...SuggéréContrat Longue DuréeTemps pleinStageTravail au bureauRecrutement immédiatLundi au vendredi
- ...We Are: Price Industries Limited, North America’s leading manufacturer and distributor of air distribution products ( The founding principles... ...Price Café offers free Tea and Coffee. Manufacturing Engineering Specialist - Finishing The successful candidate's...SuggéréPour les contractantsTravail au bureauRelocation
- ...Who We Are: Price Industries Limited, North America’s leading manufacturer and distributor of air distribution products ( The founding... ...Coffee. Responsibilities: • Lead a team of manufacturing engineers, specialists, and technicians through the successful completion...SuggéréPour les contractantsTravail au bureau
- ...Price Industries Limited North Americas leading manufacturer and distributor of air distribution products (). The founding principles of... ...thatOur convenient Price Café offers free Tea and Manufacturing Engineering Assistant (Student Term 8 Months)(TPM)The successful...SuggéréTemps plein
- ...POSITION SUMMARY Reporting to the Manufacturing Engineering Supervisor, you will support all manufacturing engineering activities within the assigned cells, including electrical system integration and system troubleshooting, implementing and facilitating lean manufacturing...Temps pleinСontratStageRecrutement immédiat
- ...We Are: Price Industries Limited, North America’s leading manufacturer and distributor of air distribution products ( The founding principles... ...Price Café offers free Tea and Coffee. Manufacturing Engineering Assistant - GRD (CO-OP 4-Month or 8-Month Term) Price...Pour les contractantsTravail au bureau
- ...We Are: Price Industries Limited, North America’s leading manufacturer and distributor of air distribution products ( The founding principles... ...Café offers free Tea and Coffee. Senior Manufacturing Engineering Specialist - Critical Environments Reporting To:...
- ...everyone involved. This is why we invest in our modern, cutting-edge manufacturing facility in Winnipeg Manitoba, Canada. We have produced high... ..., and you’re invited to be a part of that. Manufacturing Engineering Specialist The Manufacturing Engineering Specialist will...СontratTravail au bureau
$90k - $120k par année
We have an exciting opportunity for a Manufacturing Engineer in the Windsor, ON area!What is in it for you? Be a part of a dynamic, progressive global organizationAbove-average compensation packageGreat team environmentBe a part of an organization that offers career growthSalary...$80k - $100k par année
...Responsibilities Apply technical expertise to ensure that the manufacturing process is correctly created prior to product launch Perform... ...processes At least 2 years of work experience as a Process Engineer or as a Manufacturing Engineer A degree or diploma in...Emploi permanentTravail posté- Job DescriptionAAA Canada is looking for a Manufacturing Engineer to join a dynamic team within a manufacturing environment. Responsibilities Establish and maintain technical production sequences (precedence diagram) Analyze and establish critical cycle times Establish...Horaires flexibles
$75k - $125k par année
JDRF Electromag Engineering Inc. is a research-intensive product development company located in Port Credit, Mississauga, Ontario. Our mission... ...DESCRIPTIONWe are seeking a motivated and detail-oriented Manufacturing Engineer to support and improve the manufacturing of our...СontratStage$80k - $100k par année
Our client in Vaughan is looking for a Manufacturing Engineer. They are seeking someone who has been employed with a tier 1 or tier 2 automotive manufacturing company as a Manufacturing or Process Engineer. Location : Vaughan, Ontario. 100% On Site Position Type : Full...Emploi permanentTemps plein- ...traitement chimique et de lavage (un atout)5 ans ou plus d'expérience professionnelle dans un atelier ou une usine (souhaitable)Expérience en gestion de projet dans un environnement au rythme soutenuJob title: Manufacturing Engineer12 Month renewable Contract - #J-18808-LjbffrСontratZone locale
$85k - $95k par année
...capabilities in design, development, testing and manufacturing of complex powertrain systems. Our name... ...: University Degree in Mechanical Engineering, or equivalent5 to 7 years experience... ..., and implement procedures required to manufacture, assemble, and test products of the...Zone localeRecrutement immédiat$80k - $95k par année
...believe that your career path should be as unique as you are.Group Summary Cosma provides a comprehensive range of body, chassis and engineering solutions to global customers. Through our robust product engineering, outstanding tooling capabilities and diverse process...RelocationHoraires flexibles- ...United States, supporting OEM contract manufacturing and in-house product lines. We take pride... ...excellence extends beyond the products we manufacture. It is reflected in our processes,... ...expectations. Your Impact The Manufacturing Engineer plays a key role in transforming...Contrat Longue DuréeСontratTravail temporaireTravail au bureauHoraires flexibles
- Join to apply for the Manufacturing Engineer role at Profound Medical Inc. This is a 2-year contract position. This role will support and drive improvements in the manufacturing of medical devices at Profound Medical. Minimize costs and sustain the product through...Сontrat
usd74k - usd86k par année
Compensation: USD 74,000 - USD 86,000 - yearly Job DescriptionWe are hiring a Manufacturing Engineer to lead and provide ongoing support through our manufacturing life cycle! What You Will Be Doing:With limited direction, will lead the introduction of new products into...Temps pleinVisa de travailHoraires flexibles- ...continuous growth – now looking for our next star – a passionate Manufacturing Engineer. This position reports to Operations Engineering Manager... ..., British Columbia in Canada. The facility develops and manufactures hydraulic, electronic, and combustion-based products. As...Zone localeLe monde entier
$67k - $116k par année
Job Description Senior Manufacturing Engineer (Silent-Aire) Build your best future with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine building performance to serve people, places, and the planet.Join a...StageLe monde entier- ...diverse group of experts, from creative designers to talented engineers. Whatever expertise we bring from all over the world, we listen... .... Together, we create fun for families globally. Position: Manufacturing Engineer Status: Regular Full Time, 40 hours a week Department...Temps plein
- Backed by more than a century of engineering excellence in thermal management technology,... ...continuous improvement methods such as lean manufacturing, six sigma and 5S to enhance... ...maintenance and repair services, following manufacturer’s instructions and procedures. Partner...Travail temporaireHoraires flexibles
$80k - $110k par année
Position Summary The Manufacturing Engineer designs and implements the manufacturing processes that deliver the plant's production goals for safety-critical powertrain components in a high-volume automotive environment. The role works with Production, Quality, Maintenance...Pour les contractants$100k - $120k par année
Ingénieur(e) de fabrication Vous possédez un diplôme en génie mécanique, cumulez au moins 3 ans d’expérience dans le secteur manufacturier et avez le dynamisme nécessaire pour mener à bien des projets stimulants ? Vous avez une approche axée sur le terrain et aimez diagnostiquer...Horaires flexiblesÉquipe de jour$80k - $95k par année
...be responsible for the transfer of new products from engineering and assay development into manufacturing, designing, and developing assembly processes that... ...Assay Development and Engineering teams to ensure the manufacture and supply of prototype consumable assemblies needed...- ...protecting and saving lives. Job Summary - TERM The Sr Manufacturing Associate role supports the filling of specialty pharmaceutical... ...for product filling operations • Troubleshooting issues at Engineering user level • Run all viable and non-viable samples and independently...Travail au bureauZone localeHoraires flexiblesTravail postéÉquipe de nuit
$77k - $96k par année
...continuous growth – now looking for our next star – a passionate Manufacturing Engineer. This position reports to Operations Engineering Manager... ..., British Columbia in Canada. The facility develops and manufactures hydraulic, electronic, and combustion-based products. As...Zone localeLe monde entierTravail posté- Adamson is a discrete manufacturer with strong vertical integration. Our capacity includes PCB assembly, CNC part making, finishing and... ...for Masters) in Mechanical, Industrial, or Manufacturing Engineering. Experience : 5+ years of shop floor experience required....Travail occasionnelStage
Voulez-vous recevoir plus d'offres d'emploi ?
S'abonner et recevoir des offres d'emploi similaires à Manufacturing Engineer. Soyez parmi les premiers à postuler !

