Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Hardware Engineer

NUVACORE

Nuvacore is building a ground-up high performance, low-power CPU for next-generation compute workloads. We are seeking a highly skilled and motivated Hardware Board Design Engineer to drive the architecture, design, and development of next-generation, high-performance, and energy-efficient CPU server solutions for data center applications. In this role, you will be responsible for the end-to-end hardware development life cycle, from initial concept and feasibility studies to schematic capture, PCB layout oversight, component selection, and laboratory brings-up. You will collaborate closely with cross-functional teams—including Package Design, Signal/Power Integrity (SI/PI), Thermal/Mechanical Engineering, and Software/Firmware—to deliver robust, scalable, and cutting-edge system platform hardware.ROLE
Board-Level Architecture & Design: Lead the design and development of complex, multi-layer, high-density interconnect (HDI) server motherboards, baseboards, and riser cards optimized for data center workloadsSchematic Capture & Component Selection: Ownership of schematic entry, creation of complex hierarchical designs, and rigorous component selection prioritizing power efficiency, thermal performance, and long-term reliabilityLayout Collaboration: Work hand-in-hand with PCB layout engineers to define board stack-ups, routing constraints, component placement, and shielding strategiesCross-Functional Alignment: Collaborate tightly with the Silicon, Package Design, and SI/PI teams to implement optimal co-design methodologies for high-speed interfaces (e.G., PCIe Gen6/Gen7, DDR5/LPDDR6, CXL) and robust power delivery networks (PDN)Power & Thermal Management: Design highly efficient, high-current power delivery paths (VRMs, multiphase buck converters) capable of supporting ultra-high-power CPUs while meeting strict data center energy-efficiency metricsBring-up, Validation, & Debug: Lead the hands-on hardware bring-up, debugging, and validation of prototype boards in the lab using high-speed oscilloscopes, logic analyzers, and specialized test equipmentManufacturing Support: Generate comprehensive fabrication and assembly documentation (Gerbers, BOMs, ODB++). Partner with fabrication houses and EMS partners to resolve DFM/DFA/DFT issues and ensure smooth mass production transitionsRequirements — Must Have
Education: Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related technical fieldExperience: 5+ years of professional experience in high-speed hardware board design, ideally focused on enterprise servers, data center hardware, or complex computing platformsEDA Tools: High proficiency in industry-standard schematic capture and PCB layout tools (e.G., Cadence Allegro, Concept HDL, OrCAD, or Altium Designer)High-Speed Design Knowledge: Direct experience designing with high-speed serial/parallel interfaces (such as PCIe, DDR/LPDDR, or USB) and understanding basic SI/PI constraintsPower Delivery: Proven experience with board-level power distribution design, DC-DC converters, and multi-phase VRMs supporting high-current railsLab Skills: Strong hands-on laboratory experience with hardware debugging, rework, and using diagnostic equipment (DMMs, scopes, network analyzers)Requirements — Nice To Have
Education: Master’s degree in Electrical Engineering or Computer EngineeringAdvanced Data Center Experience: 10+ years deep understanding of data center server architectures, OCP (Open Compute Project) standards, and system topologies (e.G., CPU sockets, high-speed riser configurations, and BMC sub-systems)Silicon-Package-Board Co-Design: Familiarity with the interplay between advanced semiconductor packaging (e.G., chiplets, 2.5D bridges) and high-density PCB implementationSimulation & Modeling: Familiarity with SI/PI and thermal simulation concepts using tools such as Ansys (SIwave, HFSS), Cadence Sigrity, or HyperLynx to guide early-stage design constraintsManufacturing Integration: Strong background in optimizing layouts for high-volume manufacturing, minimizing layer counts while maintaining performance, and handling DFX (Design for Manufacturing/Assembly/Test) validationSelf-Driven & Collaborative: Excellent communication and cross-functional collaboration skills, with the ability to thrive in a fast-paced, startup-like environmentWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
#J-18808-Ljbffr
Vacancy posted 2 hours ago
Similar jobs that could be interesting for youBased on the Hardware Engineer in Winnipeg, MB vacancy
  •  ...progress. The company invented the world’s first 3D-stacked photonics engine, Passage capable of connecting thousands to millions of...  ...lab characterization and debug of high-speed electrical/optical hardware, including novel failure modes Build system-level electrical/... 
    Suggested
    Long term contract
    Full time
    Temporary work
    Flexible hours

    Lightmatter, Inc.

    Winnipeg, MB
    6 days ago
  •  ...experience for Arlo users that is easy to set up and interact with every day.The Arlo Smart Home Device team is seeking a Hardware/Electrical Engineer with 3+ years of experience in the electronics industry. You should be self‑motivated and able to manage multiple tasks at... 
    Suggested
    Work at office
    Work from home

    Arlo Technologies, Inc.

    Winnipeg, MB
    2 hours ago
  • $90k - $100k per year

    Job DescriptionThis is a hands-on, non-managerial hardware engineering role supporting a primarily hardware-focused product portfolio, with some customer support responsibilities. The team designs and supports instrumentation and electronics products, including nodes and related... 
    Suggested
    Permanent employment
    Flexible hours

    ACTalent

    Winnipeg, MB
    2 hours ago
  •  ...from competitive salaries, comprehensive benefits, and flexible work arrangements. Job DescriptionCS Group Canada is seeking a Hardware Engineer with strong experience in designing PCB boards for Aerospace. The successful candidate will contribute to the design,... 
    Suggested
    Permanent employment
    Full time
    Flexible hours

    CS GROUP

    Winnipeg, MB
    2 hours ago
  •  ...some of the largest technology companies globally to deliver cutting-edge products to our customers. We are seeking an Electronics Hardware Engineer with strong, practical experience in electronic circuit design, schematics, and PCB layout. This hands-on role contributes to... 
    Suggested
    Relocation package

    Algo Communication Products Ltd.

    Winnipeg, MB
    2 hours ago
  • $104.31k - $129.31k per year

     ...events to stay connected and engaged. We’re a certified Great Place to Work®, five years in a row! We’re looking for a Hardware Test Engineer who is passionate about designing cutting‑edge test infrastructure and validating hardware that will operate in the harshest... 
    Internship
    Work at office
    Relocation package

    Kepler Communications Inc.

    Winnipeg, MB
    2 hours ago
  • We are looking for a senior hardware engineer to help support the design, manufacturing, testing, and debugging of our Software Defined Radios. This position will see you design and develop hardware, carry out initial bring up (including writing hardware drivers for various... 

    Per Vices Corporation

    Winnipeg, MB
    2 hours ago
  • $75k - $95k per year

     ...partnering with a fast-growing Canadian technology company that designs connected hardware used in millions of homes across North America. We’re looking for a Hardware Verification Engineer early in their career to help test and deliver its next generation of products.... 
    Long term contract
    Temporary work
    Work at office
    Night shift

    OpTalent

    Winnipeg, MB
    2 hours ago
  •  ...and operate global systems for data capture, data labeling, and hardware-enabled workflows used by leading AI labs and robotics companies...  ...trustworthy measurements. Work with firmware and mechanical engineers to validate power, timing, synchronization, and sensor performance... 
    Flexible hours

    Mecka AI

    Winnipeg, MB
    2 hours ago
  •  ...lawful permanent residents/green card holders, and certain protected individuals, including refugees and asylees.Role Overview Hardware Engineer (3 – 5 Years Experience) We are seeking a motivated and skilled Hardware Engineer with 3 to 5 years of experience to... 
    Permanent employment
    Worldwide

    Data Device Corporation

    Winnipeg, MB
    2 hours ago
  • As a Principal Hardware Engineer, you will design, develop, and deliver Ultra High-performance electronic products. In addition, you may provide technical leadership to a small design team. We are looking for candidates who thrive in a fast-paced, start‑up-like environment.... 

    Broadcom Inc.

    Winnipeg, MB
    2 hours ago
  • Role DescriptionWe are seeking a Hardware Engineering Lead for a full-time, on-site position based in Vancouver, BC. The Hardware Engineering Lead will be responsible for overseeing the design, development, and optimization of hardware systems. Daily tasks include leading the... 
    Full time
    Internship

    Texavie

    Winnipeg, MB
    2 hours ago
  • Lead electronic hardware manufacturing for Mecka AI, focusing on supplier readiness, process development, and scalable production systems.As a Hardware Manufacturing Engineer, you will own manufacturing readiness and scale from development builds through repeatable production... 

    Mecka AI

    Winnipeg, MB
    2 hours ago
  •  ...and operate global systems for data capture, data labeling, and hardware-enabled workflows used by leading AI labs and robotics companies...  ...recovery behavior. Reproduce field failures with hardware and test engineers, and validate fixes across supported device configurations.... 
    Remote work

    Kindredventures

    Winnipeg, MB
    2 hours ago
  •  ...the data infrastructure layer for robotics and embodied AI.We design and operate global systems for data capture, data labeling, and hardware-enabled workflows used by leading AI labs and robotics companies to train and validate humanoid and embodied AI systems.We work closely... 

    Kindredventures

    Winnipeg, MB
    2 hours ago
  • $160k - $200k per year

     ...data infrastructure layer for robotics and embodied AI. We design and operate global systems for data capture, data labeling, and hardware-enabled workflows used by leading AI labs and robotics companies to train and validate humanoid and embodied AI systems. We work closely... 

    Mecka

    Winnipeg, MB
    2 hours ago
  •  ...and operate global systems for data capture, data labeling, and hardware-enabled workflows used by leading AI labs and robotics companies...  ...with physical measurements. Partner with electrical and sensor engineers on packaging, thermal paths, cable routing, and service access.... 
    Flexible hours

    Mecka AI

    Winnipeg, MB
    2 hours ago
  •  ...studies for residual current protection products. Propose sound hardware solutions.Design residual current detection circuits for Type A...  ...) Bachelor's degree or above in Electronics, Electrical Engineering, Automation, or a related field.Strong skills in schematic design... 

    ABB Inc

    Winnipeg, MB
    2 hours ago
  •  ...5000 company focused on product excellence, outstanding service, and a high-performing team. We are currently seeing a Hardware Applications Engineer to be responsible for hands on testing and documentation preparation to validate computer hardware solutions to our customers... 
    Work at office

    Teguar Corporation

    Winnipeg, MB
    2 hours ago
  •  ...and operate global systems for data capture, data labeling, and hardware-enabled workflows used by leading AI labs and robotics companies...  ...with physical measurements. Partner with electrical and sensor engineers on packaging, thermal paths, cable routing, and service access.... 
    Flexible hours

    Kindredventures

    Winnipeg, MB
    2 hours ago
  •  ...and operate global systems for data capture, data labeling, and hardware-enabled workflows used by leading AI labs and robotics...  ...Manufacturing program leadership: production readiness, supplier engineering, capacity planning, and product quality. Process development... 
    Flexible hours

    Mecka AI

    Winnipeg, MB
    2 hours ago
  • $120k - $175k per year

     ...safe module. At Daanaa, we are building a world of Energy Untethered™. We are growing here at Daanaa and are looking for a Hardware Engineering Manager to lead our hardware engineering team and drive the development of next-generation power electronics from concept through... 
    Internship
    Work at office

    Daanaa

    Winnipeg, MB
    2 hours ago
  • Join to apply for the Hardware Design Engineer role at Amaris Consulting1 day ago Be among the first 25 applicantsJoin to apply for the Hardware Design Engineer role at Amaris ConsultingWho are we? Amaris Consulting est une société indépendante de conseil... 

    Amaris Consulting

    Winnipeg, MB
    2 hours ago
  • Join Motive as a Security Engineer specializing in Hardware Security, focusing on safety and efficiency in physical operations. Your role will involve design reviews and threat modeling to enhance security. As a Security Engineer, you will collaborate with hardware teams... 
    Internship

    Motive

    Winnipeg, MB
    2 hours ago
  • $100k - $135k per year

    Interlocking Hardware Engineering LeadLocation: Toronto, ON, CA Company: Alstom At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital... 
    Seasonal work
    Work at office
    Worldwide

    Alstom

    Winnipeg, MB
    2 hours ago
  • $90k - $125k per year

     ...smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.Could you be the full-time Interlocking (IXL) Hardware Design Engineer in Toronto, ON, we're looking for?Your future role Take on a new challenge and apply your technical expertise in a cutting... 
    Long term contract
    Full time
    Worldwide
    Flexible hours

    Alstom

    Winnipeg, MB
    2 hours ago
  •  ...events to stay connected and engaged. We are a certified Great Place to Work, five years in a row. We are seeking a Manager, Hardware Test Engineering to lead the hardware test engineering function at Kepler, supporting the development and delivery of next‑generation space... 
    Long term contract
    Internship
    Work at office
    Relocation package

    Kepler Communications Inc.

    Winnipeg, MB
    2 hours ago
  •  ...and verification skills for innovative mining technology. Shape systems that improve processing decisions.This Senior Electronics Hardware Engineer develops electrical and electronic components and systems for a company serving the mining industry. The role emphasizes analog... 

    Corporate Recruiters Ltd.

    Winnipeg, MB
    2 hours ago
  • Shape professional audio hardware at Adamson's Port Perry facility through mechanical design, prototyping, and acoustics-focused engineering. Support products from concept to launch.As a Mechanical Design Engineer, you will develop enclosures, rigging systems, and integration... 

    Adamson Systems Engineering

    Winnipeg, MB
    2 hours ago
  • Design advanced electronics and instrumentation hardware in Calgary, using complex PCB layout and structured root cause analysis onsite....  ...-facing technical issues.This hands-on, non-managerial Hardware Engineer role supports a primarily hardware-focused product portfolio. You... 

    ACTalent

    Winnipeg, MB
    2 hours ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Hardware Engineer. Be the first to apply!