Aircraft Mechanic AME M2 (C-17)
$95k - $110k per yearBoeing
Aircraft Mechanic AME M2 (C-17) Company: Boeing Canada Operations Ltd Boeing Canada Operations Ltd. Global Technical Operations, Field Operations is looking for a highly skilled and experienced Aircraft Mechanic (C-17), working out of the CFB Trenton, ON to support Canada Operational & Intermediate (O&I) Level Maintenance Augmentation Support Team (MAST) under the United States Government C-17 G3 Sustainment Contract. The Aircraft Mechanic (C-17) will work directly under the guidance of the Lead Technician and report directly to the onsite Maintenance Manager. Position Responsibilities:
- Assembles, disassembles, repairs, modifies, and/or upgrades aircraft systems and components to correct failures or implement changes.
- Supports scheduled and unscheduled maintenance activities, including inspections, troubleshooting, repair, and replacement of aircraft components.
- Troubleshoots complex pneumatic, hydraulic, electrical, and mechanical systems to isolate faults and repair defective components.
- Performs validation and verification testing of systems and components to ensure proper operation.
- Documents maintenance actions, procedures, test results, and inspection findings to ensure contractual and regulatory compliance.
- Inspects components and verifies repairs for airworthiness and flight readiness requirements.
- Supports system configuration, assembly, disassembly, and overhaul activities as required.
- Works under general direction and may assist in training less experienced personnel.
- 4+ years of aircraft maintenance experience required.
- Knowledge of operations and aircraft maintenance practices.
- Must have knowledge and use of special tools/equipment required to perform assigned maintenance tasks and the ability to interpret Technical Orders (TOs).
- Must have one of the following: Transport Canada Civil Aviation (TCCA) Aircraft Maintenance Engineer (AME) licensed M2 rating or Military equivalent.
- Must be legally able to work in Canada.
- Must be willing and eligible to work on Canadian government and defense-related programs with no restrictions.
- Must consent to Canadian Government Controlled Goods Program (CGP) assessment.
- Individuals must not pose a risk for safeguarding of controlled goods.
- Must be eligible for Secret Level II security clearance.
- Must be eligible to handle US export-controlled data.
- 3+ years of experience with Canadian Aviation Regulations and Aircraft Airworthiness Directives.
- Canadian CC177 Globemaster III Type Course via Air Educational and Training Command (AETC)
- Department of Defense/Canadian Armed Forces Airworthiness Program
- Active Secret Level II security clearance.
- Proven knowledge and proficiency in Excel, Word, Outlook and PowerPoint and the ability to learn in-house systems.
$95k - $110k per year
...Aircraft Structures Technician (C-17) Company: Boeing Canada Operations Ltd Boeing Canada Operations Ltd . Global Technical Operations, Field Operations... ...Directives. ~ Aircraft Structures Technician /Aircraft Mechanic, maintenance release authority (MRA), or equivalent to...SuggestedFull timeContract workWork at officeRemote workRelocationRelocation packageShift work$90k - $112k per year
...Aircraft Mechanic (CH147F) Company: Boeing Canada Operations Ltd Boeing Canada Operations Ltd. is seeking Aircraft Mechanic, reporting to the... ...Transport Canada Civil Aviation (TCCA), Aircraft Maintenance Engineer (AME), Avionics Technician (AME-E) licensed or Military equivalent....SuggestedFull timeLive InImmediate startRelocationRelocation packageShift work$90k - $112k per year
...Aircraft Avionics Technician (CH147F) Company: Boeing Canada Operations Ltd Boeing Canada Operations... ...will join the existing team of mechanics supporting the CH147F Phase Inspections in... ...Aviation (TCCA), Aircraft Maintenance Engineer (AME), Avionics Technician (AME-E) licensed or...SuggestedFull timeLive InImmediate startRelocationRelocation packageShift work- ...service excellence, we offer full-service support and expertise in aircraft management, charter, maintenance, and sales from our fixed-... ...Strong communication and customer service skills. Being mechanically inclined is considered an asset. Ability to lift up to 50 lbs...SuggestedRelocation packageMonday to fridayDay shift
- ...FL Technics is a global provider of tailor-made services for aircraft maintenance, repair, and overhaul (MRO), delivering solutions to... ...required. WHAT YOU SHOULD BRING: Hold a valid Transport Canada AME M2 aircraft maintenance engineer license and Transport Canada approved...SuggestedWorldwideFlexible hours
- Job Title: Project Manager – Senior Location: Toronto, ON Experience: 3–9 Years Job Type: Contract Job Summary We are seeking an experienced Senior Project Manager to lead the planning, execution, monitoring, and delivery of complex IT and business transformation...Contract work
- ...Security Check \nCompany Description Aeropol Aviation Services Corp. (AAS) is a leading Canadian provider of quality-driven aircraft component maintenance, repair and overhaul (MRO) solutions to meet the most demanding standards of the aerospace industry. Company...Work at office
- ...Services Corp. (AAS) is a leading Canadian provider of quality driven aircraft component maintenance, repair, and overhaul (MRO) solutions to... ...-stop shop specializing in Hydraulic, Pneumatic, Fuel System, Mechanical, Electrical and Landing Gear component MRO services, Component...Casual workSummer holidayMonday to fridayShift workDay shift
$17.95 - $18.5 per hour
...Able to utilize retail technology. Able to maneuver around sales floor, stockroom and office and lift up to 30 lbs. Hourly Range: $17.95 - $18.50 Employee pay will vary based on factors such as qualifications, experience, skill level, competencies and work location....Hourly payMinimum wagePart timeSeasonal workWork at officeFlexible hoursNight shiftWeekend workAfternoon shift$70k - $80k per year
...filtration, pump, spray, and valve products. THE ROLE The Mechanical Designer is responsible for designing pump sets, base assemblies,... ...Desirable: University degree in an Engineering field. C.E.T. designation in Mechanical Engineering Technology. Experience...InternshipWork at office$17.95 per hour
...Able to utilize retail technology. Able to maneuver around sales floor, stockroom and office and lift up to 30 lbs. Hourly Range: $17.95 - $18.00 Employee pay will vary based on factors such as qualifications, experience, skill level, competencies and work location....Hourly payMinimum wagePart timeWork at officeFlexible hoursNight shiftWeekend workAfternoon shift- ...requirements, and company procedures. Provide guidance to designers, drafters, technicians, and junior engineers. About you Degree in Mechanical Engineering, Mechatronics Engineering, or a related discipline. Registered as, or eligible to become, a Professional Engineer (P....Full timeInternshipFlexible hours
$17.95 - $18.5 per hour
...standing, walking, moving throughout the store, and lifting up to 30 pounds, with or without reasonable accommodation. Hourly Range: $17.95 - $18.50 Employee pay will vary based on factors such as qualifications, experience, skill level, competencies and work location....Hourly payMinimum wagePart timeSeasonal workWork at officeVisa sponsorshipFlexible hoursAfternoon shift$37 per hour
...environment ~ Noisy Responsibilities Tasks Adjust, repair or replace electrical system parts Adjust, repair or replace mechanical system parts Discuss work with supervisor Review work orders Perform scheduled maintenance and service Repair and...Permanent employmentFull timeRemote work- Job Description Job Description Diagnose and repair vehicles,review work orders and discuss work with supervisor. Inspect motor in operation, road test motor vehicle, and test automotive systems and components using computerized diagnostic and other testing devices to diagnose...
- ...it! For this role, you can be based in either our Pickering or Mississauga, ON, offices, within a hybrid working environment. As a Mechanical Engineer within the Enabling Projects team, you will play a key role in developing the technologies, infrastructure, and strategic initiatives...Full timeInternshipWork at office
- ...Job Description Overview AtkinsRealis is currently looking for a Mechanical Technologist to join our engineering team in Sheridan Park, Mississauga, Ontario. Functionally reporting to the Retube Tooling manager, the Mechanical Technologist would support one of the various...Full timeApprenticeshipInternshipFlexible hoursShift workNight shift
- ...Hybrid 2 days a week at the office . We are seeking a Building Mechanical Technologist to join our multidisciplinary Buildings team. This... ...priorities ~ Certified Engineering Technologist or Technician (C.E.T. or C.Tech) ~ Alternative delivery model experience would be...Permanent employmentInternshipWork at officeFlexible hours2 days per week
- ...Job Description We are seeking a skilled Maintenance Mechanic (433A) to join our team. The successful candidate will be responsible for installing, maintaining, troubleshooting, and repairing industrial machinery and mechanical equipment to ensure efficient operations....Full timeShift work
$36.92 per hour
...Industrial Mechanic Job Details Salary: $36.92 per hour Location: 6310 Kestrel Road, Mississauga, ON L5T 1Z3 Hours: 35 hours per week Employment Type: Permanent, Full-time Start Date: As soon as possible Vacancies: 1 Overview Language: English Education...Hourly payPermanent employmentFull timeImmediate startRemote work$36 - $42 per hour
...exciting opportunity for Full-Time Licensed 310T Automotive Technician to work out of our Mississauga Service Centre. The Automotive Mechanic will perform preventative maintenance, new car stock prep, tire repair/replacement and perform brake work according to company policy...RemplacementFull timeImmediate startMonday to friday$20 per hour
...progress and create a more sustainable, healthier world. Summary: AGAT Laboratories is currently looking for a Laboratory Technician C in our Mississauga facility. This position is an entry level role where one can gain career experience in a with organics sample...Long term contractFull timeInternshipSeasonal workLocal areaFlexible hoursShift workWeekend workAfternoon shift- ...Job Description Overview AtkinsRéalis is looking to hire a Senior Mechanical Engineer. This position requires experienced individuals who are self-starter capable of working independently and leading/supervising junior engineers. The individuals will work in a fast-paced...Full timeInternshipFlexible hours
- ...hydraulic and pneumatic issues. • Provide recommendations for continual improvements and maximize efficiencies. • Pass on technical/mechanical information to mechanical apprentice. • Learn extrusion processes from mechanic A. • Maintain a safe work environment, complying...ApprenticeshipFlexible hoursNight shiftRotating shiftAfternoon shift
- Job Description Are you looking for a company that works on major engineering projects all over the world? Do you want to make a difference by improving the daily lives of communities worldwide? Are you seeking to join an inclusive and diverse team that you can truly count ...Full timeWorldwideFlexible hours
- ...in our Canadian and international offices as well as at client sites. Reporting to the Manager of Retube Tooling – Common Tools, the Mechanical Technologist (Integration) would support Qinshan tooling scope. The candidate will be responsible for testing, troubleshooting and...RemplacementFull timeContract workApprenticeshipInternshipFlexible hours
- ...pension plan. A work environment focused on health and safety. About You Bachelor’s degree from an accredited university in mechanical, chemical, nuclear engineering or a related engineering discipline. A minimum of four years of relevant experience in mechanical,...Full timeWorldwideFlexible hours
- ...Complete the assigned scopes or tasks within a given budget and schedule, and in good quality. About you Engineering Degree in Mechanical from an accredited university or equivalent degree as recognized by Professional Engineers Ontario (PEO). Having a P.Eng. license...Permanent employmentFull timeInternshipFlexible hours
- ...one of Canada's largest private sector nuclear engineering groups and contribute to the advancement of CANDU nuclear technology. As a Mechanical Engineer, you will support the design and analysis of critical reactor components, systems, and structures while working alongside...Full timeInternshipFlexible hours
- ...Job Description The Mechanical Engineer will support refurbishment, retube, field services, and new-build nuclear projects. This role combines design engineering expertise with field execution support, providing technical leadership throughout the full lifecycle of tooling,...Full timeFor contractorsFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Aircraft Mechanic AME M2 (C-17). Be the first to apply!
- aircraft mechanic no experience Mississauga, ON
- aircraft maintenance technician Mississauga, ON
- aircraft mechanic Mississauga, ON
- aircraft Mississauga, ON
- aircraft designer Mississauga, ON
- aircraft delivery Mississauga, ON
- aircraft maintenance Mississauga, ON
- aircraft cleaning Mississauga, ON
- aircraft maintenance director Mississauga, ON
- aircraft mechanic no experience

