Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Manufacturing Test - Ate And Bed Of Nails Specialist

dcbel Inc

Dcbel Inc. ( designs and sells residential products to make clean, efficient, and sustainable energy accessible to all — because everyone in the world deserves energy without compromise.Dcbel is at the leading edge of the residential energy revolution. Its products enable decentralized energy consumption and production through its vertically integrated suite of energy hardware and software products, and their supporting infrastructure.Our flagship product, dcbel Ara, is a Home Energy Station that gives everyone ownership over their energy supply by using solar power to charge their EV and power their home, unlocking their EV’s battery for blackout protection, backup power (V2H) and grid services (V2G), and optimizing the energy flow between their solar panels, EVs, stationary battery and the grid.The opportunity
Reporting to the Lead Electronics Engineer, your role will be to design, develop, and deliver high-reliability bed‑of‑nails test fixtures and ATE interfaces optimized for robust, repeatable PCBA production testing.Main Responsibilities
Design and develop bed‑of‑nails fixtures optimized for probe access, signal integrity, mechanical robustness, and manufacturability.Select, integrate, and implement ATE hardware (instrumentation, switching, power, loads) in alignment with defined system requirements and architecture.Ensure fixture reliability in production through proper probe selection, contact optimization, wear management, and maintenance strategies.Develop and maintain standardized fixture design templates, best practices, and guidelines to enable efficient replication and scalability across test lines.Collaborate with mechanical engineering to design fixture housings, alignment mechanisms, and actuation systems ensuring precision and repeatability.Define and execute fixture qualification, validation, and bring‑up procedures to ensure readiness for production deployment.Troubleshoot and optimize fixture and interface performance, addressing contact issues, signal integrity problems, and test stability.Support manufacturing operations by resolving fixture-related issues, reducing downtime, and improving test yield and throughput.Coordinate with vendors and suppliers to source probes, materials, and specialized components or custom fixture solutions.Document fixture designs, interface schematics, and maintenance procedures to ensure knowledge transfer and operational continuity.Key Requirements
Bachelor's or Master's degree in Electrical Engineering, Systems Engineering, or related field.4+ years in test system architecture or automated test equipment (ATE) design.Experience leading multi-disciplinary engineering teams.Experience with modular platform design for manufacturing test environments.Bonus Skills
Bilingual English and French written and spoken.Profile
Strong knowledge of in-circuit test (ICT), functional test, and boundary scan methodologies.Expertise in system‑level design integrating hardware, software, and mechanical disciplines.Familiarity with safety and reliability standards.Proficient with requirements management tools.Strong leadership and decision‑making abilities.Excellent cross‑functional communication.Strategic thinker with hands‑on technical depth.Entrepreneurial mindset, result oriented and strong EQ.Autonomous, good teammate with strong problem‑solving skills.What's in it for you
Be part of a company that is backed by numerous globally respected investors and has world‑changing patents in an industry changing for the first time in history.Grow your professional experience amongst blue chip partners and a close‑knit team of committed and experienced energy experts who deeply care about the work they do.Full benefits package including Health insurance, Health virtual care, employee stock options plan (ESOP) and flexible hours. Parking available or with our employer commute program a short walking distance from Metro Namur.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Manufacturing Test - Ate And Bed Of Nails Specialist in Winnipeg, MB vacancy
  • Design reliable bed-of-nails fixtures and ATE interfaces at dcbel in Montréal, advancing repeatable PCBA production testing through electrical expertise.Reporting to the Lead Electronics Engineer, this specialist develops high-reliability manufacturing test solutions. The work... 
    Nails

    dcbel Inc

    Winnipeg, MB
    1 hour ago
  •  ...Industries Limited, North America’s leading manufacturer and distributor of air distribution...  ...and Coffee. Manufacturing Engineering Specialist - Finishing The successful candidate'...  ...through machinery/process troubleshooting, testing, and validation to minimize downtime and... 
    Suggested
    For contractors
    Work at office
    Relocation

    Price Industries Limited

    Winnipeg, MB
    6 days ago
  •  ...Who We Are: Price Industries Limited, North America’s leading manufacturer and distributor of air distribution products ( The founding principles of Price have never changed – business integrity, first-class service, innovation and a commitment to people. Our dependable... 
    Suggested
    Work at office

    Price Industries Limited

    Winnipeg, MB
    6 days ago
  •  ...Industries Limited, North America’s leading manufacturer and distributor of air distribution...  ...Coffee. Senior Manufacturing Engineering Specialist - Critical Environments Reporting To:...  ...instruction development, and troubleshooting for test rig equipment. • Perform other duties... 
    Suggested

    Price Industries Limited

    Winnipeg, MB
    6 days ago
  •  ...grid. The Opportunity: We are looking for an experienced Manufacturing Test Electrical Engineer to ddesign electrical systems for test stations...  ...of high-voltage safety design practices. Understanding of ATE instrumentation interfaces and signal conditioning.... 
    Suggested
    Flexible hours

    dcbel Inc

    Winnipeg, MB
    1 hour ago
  •  ...why we invest in our modern, cutting-edge manufacturing facility in Winnipeg Manitoba, Canada....  ...part of that. Manufacturing Engineering Specialist The Manufacturing Engineering...  ...product and process quality by designing testing methods; testing finished product and processes... 
    Contract work
    Work at office

    Price Industries Limited

    Winnipeg, MB
    6 days ago
  • Apply or remove artificial nails and nail art Clean, trim and polish nails Provide gel and acrylic nail extensions Provide therapeutic foot massage Perform cashiering duties Manicures Pedicures Waxing To apply Send your CV:
    Nails
    Full time

    J & K Beauty Care. Inc.

    Winnipeg, MB
    23 days ago
  • Lead assembly and testing operations at AtkinsRéalis, applying manufacturing leadership and mechanical expertise in a nuclear equipment environment. Drive safe, quality-focused execution.The Assembly and Test Manufacturing Supervisor leads technicians, tradespeople, and assembly... 

    AtkinsRéalis Group

    Winnipeg, MB
    1 hour ago
  • $20 per hour

     ...Job Details Position: Nail Care Technician – (NOC) 63211, Estheticians, electrologists, and related occupations Vacancies: 2 Company Operating Name: Honey Nail Spa Business Address: 2365 B Ness Avenue, Winnipeg, Manitoba R3J 1A5 Job Duties: Clean, trim and polish... 
    Nails
    Hourly pay
    Permanent employment
    Full time

    HONEY NAIL SPA

    Winnipeg, MB
    6 days ago
  • A leading safety technology company in Calgary, Alberta seeks a Manager, Manufacturing Test Engineering to enhance product testing processes and lead a team responsible for quality assurance in manufacturing. Candidates should have over 10 years of experience in electronics... 

    Blackline Safety

    Winnipeg, MB
    1 hour ago
  •  ...energy flow between their solar panels, EVs, backup battery and the grid. The Opportunitydcbel is looking for an experienced Manufacturing Test Software Engineer to develop, implement, and continually improve an exhaustive manufacturing test strategy for our product line.... 
    Flexible hours

    dcbel Inc

    Winnipeg, MB
    1 hour ago
  •  ...for our customers, and empower our people to be their best. Job SummaryThe Manager, Manufacturing Test Engineering will support our manufacturing floor where we assemble and manufacture all products for our customers worldwide. From our circuit board manufacturing all the... 
    Internship
    Remote work
    Worldwide

    Blackline Safety

    Winnipeg, MB
    1 hour ago
  •  ...information about Modine, visit modine.com . Position Description The Test Engineer is responsible for planning, setting up, executing, and...  ..., and corrective action records. Collaborate with Engineering, Manufacturing, Quality, Maintenance, and customers on testing requirements and... 
    Temporary work

    Modine Manufacturing Company

    Winnipeg, MB
    1 hour ago
  •  ...proudly headquartered in Longueuil, Quebec, since 1928. We design and manufacture next-generation aircraft engines that power the world’s largest...  ...?You will report to the Manager of the Development Engineering Test Team. The Longueuil Development Engineering group is Pratt &... 
    Full time
    Monday to friday
    Flexible hours
    Afternoon shift

    Pratt & Whitney

    Winnipeg, MB
    1 hour ago
  • Elevate energy efficiency as a Senior Manufacturing Test Software Engineer at dcbel. Develop innovative testing solutions for products that empower sustainable energy use. dcbel is in search of a dedicated Manufacturing Test Software Engineer to enrich its testing strategy... 

    dcbel Inc

    Winnipeg, MB
    1 hour ago
  •  ...desktop computers is seeking a Factory Test Specialist to ensure the quality and performance...  ...qualification, manufacturingengineeringand manufacturing teams, especially in DFM...  ...and desktop computers. We design and manufacture solutions used by the largest tech companies... 
    Casual work

    Ecolab, Inc.

    Winnipeg, MB
    1 hour ago
  •  ...human ear canal to build novel comfortable, usable, and manufacturable earpieces that are acoustically efficient.The EERS team...  ...to diversity.Job Description We are looking for a Tests and Validations Specialist to join our multidisciplinary R&D team and to design... 
    Long term contract
    Work at office
    Work from home

    Geosam Capital

    Winnipeg, MB
    1 hour ago
  • $82.99k per year

     ...transportation, quantum science, medical countermeasures and advanced manufacturing, the NRC is hiring to drive the development of national...  ...The roleWe are looking for an intermediate-career Test and Design Specialist to support advanced research and development and join the... 
    Permanent employment
    Internship
    Work at office
    Remote work

    National Research Council Canada / Conseil national de reche...

    Winnipeg, MB
    1 hour ago
  • $93k - $109k per year

     ...Innovative Work : Collaborate on advanced manufacturing projects that deliver industry‑...  ...qualifications.Position Summary The Test Facilities Specialist Technician is a crucial part of the...  ...and by-products associated with the manufacture of engine components.Required to climb... 
    Internship

    Innio

    Winnipeg, MB
    1 hour ago
  • $80k - $95k per year

    Manufacturing Process Specialist – Johnson Electric Location: Mississauga, ON (onsite)Salary Range: $ 80,000-95,000 annuallyVacancy Type: Existing...  ...audit sheets for fixtures and toolingComplete Run at Rate testing in collaboration with Manufacturing OperationsPrepare daily... 
    Internship
    Worldwide
    Shift work
    Weekend work

    100612 FPS-Mississauga

    Winnipeg, MB
    1 hour ago
  •  ...PM MST Role OverviewRole OverviewReporting to the ERP Testing Lead, the ERP Testing Specialist is responsible for planning, organizing, and completing testing...  ...points. They will implement decisions on composing test plans and standards enterprise-wide. They will help cross... 
    Contract work

    SynergyLoft

    Winnipeg, MB
    1 hour ago
  • INNIO is seeking a Test Facilities Specialist Technician in Welland to support the Maintenance Operating System and Test Cells, ensuring top-quality...  ...engineering technology diploma in electronics/automation and 3+ years in manufacturing with PLC/CNC exposure. #J-18808-Ljbffr

    Innio

    Winnipeg, MB
    1 hour ago
  • $85k per year

     ...and among Best Employers for Recent Graduates. Our New Manufacturing Reliability Specialist: The ideal candidate would be someone who…. Is...  ...checklists, and service intervals using equipment needs and manufacturer recommendations. Monitor equipment condition and... 
    Permanent employment
    Full time

    MAD Elevator Inc.

    Winnipeg, MB
    1 hour ago
  •  ...even if you do not meet every qualification listed below. We are seeking a technically skilled and detail‑oriented Manufacturing Planning Specialist to help bridge the gap between engineering design and manufacturing execution. Working within our Project... 
    Long term contract
    Immediate start
    Relocation package
    Flexible hours

    Zero Point Cryogenics Inc.

    Winnipeg, MB
    1 hour ago
  • Apply transformer testing expertise near Montreal, QC, using specialized...  ....This Transformer Testing Specialist position suits candidates...  ...procedures.Key Responsibilities: Test transformers for efficient...  ...skills to support quality manufacturing near Montreal, QC. #J-18808... 

    Dawn Staffing Solutions Inc

    Winnipeg, MB
    1 hour ago
  • Support manufacturing safety through inspections and risk assessments as a Health, Safety and Environment Specialist. Help strengthen safe work practices across operations.This specialist supports compliance with occupational health and safety legislation, internal HSE policies... 

    Shirley Parsons

    Winnipeg, MB
    1 hour ago
  •  ...Job Description Senior Manufacturing Engineer (Silent-Aire) Build your best future with the Johnson Controls team As a global leader...  ...scaling of improvements. Lead major initiatives including factory tests, prototype testing, and pilot runs; document lessons learned... 
    Worldwide

    Johnson Controls, Inc.

    Winnipeg, MB
    6 days ago
  •  ...Wood?Kadant Carmanah Design is a global leader in designing and manufacturing equipment for the Engineered Wood products industry. We are...  ...our Manufacturing Engineering Team as a Manufacturing Engineer/Specialist We offer competitive salaries, bonuses, benefits, and an outstanding... 
    Immediate start

    Kadant Inc.

    Winnipeg, MB
    1 hour ago
  • $80.46k - $98.34k per year

    Senior Test SpecialistLocation: Halifax, Nova Scotia, CA, B3B 1E6 Onsite or Hybrid: Senior Test Specialist, Mechanical or Electrical (Permanent) – Halifax, NS Expected Salary: $80,458 to $98,337 To determine final salary, Babcock considers a variety of factors including... 
    Permanent employment
    For contractors
    Internship
    Work at office

    Babcock

    Winnipeg, MB
    1 hour ago
  •  ...To support this project, the IVVQ team (Integration, Verification, Validation, and Quality Team) is looking to add an IVVQ Test Specialist to the Thales team, to be based in Victoria or Halifax. The IVVQ Specialist plays a critical role as part of the Engineering team... 
    Long term contract
    Full time
    Temporary work
    Remote work
    Monday to friday

    Thales Canada

    Winnipeg, MB
    1 hour ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Manufacturing Test - Ate And Bed Of Nails Specialist. Be the first to apply!