Controls System Simulation Matlab
Immigrant Québec
In Your Duties, You Will Be Called Upon To
Generate and update models of the flight control system including test capabilities and interfaces
Perform technical evaluation by simulation of the flight control system servo-loop performance characteristics, including loaded rate, frequency response, accuracy, etc.
Make design recommendations to allow design compliance with the performance requirements
Support technical review of servo-loop monitor performance and robustness
Review design data and analysis provided by the component suppliers
Support technical reviews associated with the flight control system safety coverage
Conduct technical investigations, analyze and develop solutions
Participate in the testing activities on the Simulation platform and Integrated Systems Test Certification Rig (Iron Bird).
Preparing, conducting the test and analyzing test results
Perform requirement validation by simulation
Coordinate with the other aircraft technical disciplines integration of the aircraft requirements to support the design process.
Prepare and review technical reports, for example reports supporting technical requirements validation and verification. Simulation may be required for requirements validation completeness.
Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.
Profil Recherché
You are expert in the field of servo-loop control and performance of electro-hydraulic actuators
You have a good knowledge of the specification, design, integration, test and certification of Flight control systems and/or its components.
You master the principles of physics associated with structural dynamics, hydraulics and control systems
You have experience in performing feasibility studies to support the decision process
You are proactive and have an interest in aerospace Industry and systems integration.
You hold a University degree in Mechanical, Aerospace Engineering or equivalent in a recognized University.
You have a minimum of 10 years of experience in aerospace.
You are familiar with Part FAR25 / 525 certification process.
You have experience with FBW system (considered as an asset).
You have strong communication skills in French and English (written and spoken).
You have good organizational & planning skills.
You have significant experience in simulation with Matlab software.
You are a team player, but you are also able to work individually. You can deliver quality even under a challenging environment.
Knowledge of the ARP4754, DO254, DO178 processes and of DO-160 qualification requirements are considered an asset.
Présentation De La StructureMTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception, la modification et la fabrication d’Aéronefs, à toutes les étapes du cycle de produit, allant de l’avant-projet (R&D) au support à la fabrication.
Nos Pôles D’expertise Sont
Structures (calcul et conception)
Systèmes (architecture, fonctionnel, calcul et conception)
Industrialisation 4.0 et outillages
Électrification des transports (systèmes de propulsion, commandes de vol, avionique,... )
Support à la certification
Zones d'exportation: Amérique du Nord, Europe Occidentale,
Service Aérospatial: Militaire, Civil
Types d'Avions desservis: Voilure fixe, Voilure tournante, UAV, aéronefs électriques et hybrides, dirigeables,
Sous-secteurs de l'Aviation: Cellule, moteurs, train d'atterrissage, systèmes
#J-18808-Ljbffr
Generate and update models of the flight control system including test capabilities and interfaces
Perform technical evaluation by simulation of the flight control system servo-loop performance characteristics, including loaded rate, frequency response, accuracy, etc.
Make design recommendations to allow design compliance with the performance requirements
Support technical review of servo-loop monitor performance and robustness
Review design data and analysis provided by the component suppliers
Support technical reviews associated with the flight control system safety coverage
Conduct technical investigations, analyze and develop solutions
Participate in the testing activities on the Simulation platform and Integrated Systems Test Certification Rig (Iron Bird).
Preparing, conducting the test and analyzing test results
Perform requirement validation by simulation
Coordinate with the other aircraft technical disciplines integration of the aircraft requirements to support the design process.
Prepare and review technical reports, for example reports supporting technical requirements validation and verification. Simulation may be required for requirements validation completeness.
Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.
Profil Recherché
You are expert in the field of servo-loop control and performance of electro-hydraulic actuators
You have a good knowledge of the specification, design, integration, test and certification of Flight control systems and/or its components.
You master the principles of physics associated with structural dynamics, hydraulics and control systems
You have experience in performing feasibility studies to support the decision process
You are proactive and have an interest in aerospace Industry and systems integration.
You hold a University degree in Mechanical, Aerospace Engineering or equivalent in a recognized University.
You have a minimum of 10 years of experience in aerospace.
You are familiar with Part FAR25 / 525 certification process.
You have experience with FBW system (considered as an asset).
You have strong communication skills in French and English (written and spoken).
You have good organizational & planning skills.
You have significant experience in simulation with Matlab software.
You are a team player, but you are also able to work individually. You can deliver quality even under a challenging environment.
Knowledge of the ARP4754, DO254, DO178 processes and of DO-160 qualification requirements are considered an asset.
Présentation De La StructureMTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception, la modification et la fabrication d’Aéronefs, à toutes les étapes du cycle de produit, allant de l’avant-projet (R&D) au support à la fabrication.
Nos Pôles D’expertise Sont
Structures (calcul et conception)
Systèmes (architecture, fonctionnel, calcul et conception)
Industrialisation 4.0 et outillages
Électrification des transports (systèmes de propulsion, commandes de vol, avionique,... )
Support à la certification
Zones d'exportation: Amérique du Nord, Europe Occidentale,
Service Aérospatial: Militaire, Civil
Types d'Avions desservis: Voilure fixe, Voilure tournante, UAV, aéronefs électriques et hybrides, dirigeables,
Sous-secteurs de l'Aviation: Cellule, moteurs, train d'atterrissage, systèmes
#J-18808-Ljbffr
Vacancy posted 2 hours ago
Similar jobs that could be interesting for youBased on the Controls System Simulation Matlab in Winnipeg, MB vacancy
- ...is a leading provider of real-time power simulation systems, catering to utilities, research... ...analysis and implementation of mathematical control algorithms, coded into RTDS software, to... ...Experience with programs such as PSCAD, RSCAD, MATLAB, PSS/E preferred. Excellent written...SuggestedSummer workImmediate start
- ...information: Planning, design and technical coordination of the P&CM systems for Substations & Industrial projects. Detail electrical design... ...and design advanced protection systems, communication and control systems for large industrial and utility applications....SuggestedFlexible hours
- Use MATLAB simulation and servo-loop expertise to evaluate flight control systems for MTLS Aerostructure’s aerospace engineering services. French and English communication are required.This aerospace engineering role focuses on flight control system modeling, simulation, testing...Suggested
$89.91k - $113.73k per year
...Business Unit focuses on power system software development, power... ...in power system analysis and simulation and eligible for immedaiate registration... ...protection, and the control systems of synchronous generators... ...more languages, such as Python, MATLAB, or C/C++. In addition, the...SuggestedFull timeImmediate startRemote work- Hitachi Energy is seeking an experienced electrical engineer to plan, design and coordinate P&CM systems for substations and industrial projects. You will develop protection, control and communication systems and produce AC/DC schematics, wiring diagrams and cable lists....Suggested
- Develop control laws with MATLAB and C++ programming while supporting autopilot and navigation design... ...assessment tools. You will develop CLaws and systems requirements, then validate and verify... ...and SAE ARP 4754Ability to analyze simulations and flight test dataAbility to support...
- ...The Quality Control Inspector will provide Quality Process Audit support to the Assembly Line. This position will assist in reducing process... ...knowledge of mechanical, hydraulic, HVAC, suspension, and air systems. Strong attention to detail with demonstrated analytical and...Full timeTemporary work
- ...requirements. Examining and analyzing accounting and financial records, documents, and systems to ensure accuracy and compliance with established accounting standards, procedures and internal controls. Lead or participate in the audit preparation process by working with...Long term contractTemporary workWorldwide
- ...standards, and regulatory requirements. • Apply knowledge of control valves, transmitters, and process instrumentation. • Provide SME... ...experience in using a Computerized Maintenance Management Systems (CMMS) is required; experience with SAP Plant Maintenance, DeltaV...Work at officeFlexible hoursNight shiftRotating shiftAfternoon shift
- ...made Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years, Price... ..., switches, encoders, and various other I/O components and systems • Team player with the ability to build and maintain working...Remplacement
- ...Antec Controls ( is a leader in environmental monitoring and control for critical spaces such as operating rooms, isolation rooms, and laboratories... ...passion, and you’re invited to be a part of that. Embedded Systems Designer – Antec Controls We are looking for an embedded...
- ...made Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years, Price... ...balance efficiency, risk, and feasibility. • Partner with system architects, developers, and product owners to ensure solutions meet...Work at office
- ...Winpak Division is seeking a Supervisor, Production and Inventory Control to join our Production and Inventory Control team in Winnipeg.... ...control. ~ Knowledge of materials requirements planning systems and computerized bills of materials, production planning, scheduling...Full timeWork at office
- ...made Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years, Price... ...is our passion, and you’re invited to be a part of that. Lab Systems Software Developer We are looking for a Software Developer to...
- ...quality, reliable delivery, and knowledgeable follow-up service have made Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years, Price remains a privately held family company with a deep heritage and...
- ...Lottery Corporation (WCLC) is looking to add a Senior Business Systems Analyst to our Application Delivery team. You'll play a crucial... ...Architecture standards, regulatory requirements and/or security controls. ~ Work with vendors and external partners to identify prioritization...Full time
- ...made Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years, Price... ...convenient Price Café offers free Tea and Coffee. Finishing Systems Engineering Assistant (8 Month Term – Winter 2027) The...For contractors
- ...la recherche d’un(e) Ingénieur(e) en systèmes de contrôle pour rejoindre une équipe spécialisée... ...C embarqué généré à partir de modèles MATLAB et Simulink. Utiliser Embedded Coder... ...embarqués. Participer aux activités de simulation, de débogage, de validation logicielle...
- ...Antec Controls, a division of Price Industries Limited, is a manufacturing solution provider offering a wide range of products for environmental... ...Tea and Coffee. Software Developer – Antec Controls The Systems Developer role offers the opportunity to design and deliver...
- ...Lead project controls planning, cost management, scheduling, and earned value management at AtkinsRéalis across assigned projects or portfolios. Deliver accurate performance insight for effective decisions. As Project Controls Manager, you will establish standards, govern...
- ...Shape financial insight in a SaaS and technology organization as a Financial Controller specializing in IFRS, reporting, and business partnership. Working with senior finance leadership, you will connect technical controllership with financial analysis and commercial judgment...
$50k - $65k per year
...Junior Estimator – HVAC & Building Controls Location: Winnipeg, MB Job Type: Full-Time | Permanent Salary: $50,000–$65,000, based... ...is awarded Learn the company’s HVAC and building controls systems and processes Qualifications Some experience or education...Long term contractPermanent employmentFull timeFor contractorsFor subcontractorFlexible hours- ...opening for a Developer. About the team: The Smart Grid Technology Lab focuses on research in real-time simulation technologies, microgrid energy management, control systems, and other smart grid technologies. We apply cutting-edge technologies to the digital power industry....Long term contractContract workInternshipImmediate start
- Develop power system EMT simulation models in C++ at Huawei Canada, applying numerical methods and control systems expertise. This is a 12-month contract opening.As a Developer, you will work under a supervisor with Smart Grid Technology Lab experts. The work supports real-time...Long term contractContract work
- ...made Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years, Price... ...background in software development, an understanding of ERP systems, excellent problem-solving skills, and the ability to work both...
- ...made Price a market leader in supplying air distribution, critical controls, and noise control products. After more than 60 years, Price... ...free Tea and Coffee. Test Automation Lead Enterprise Systems • IFS ERP • Multi-site Manufacturing ROLE PURPOSE Build and...
- ...Antec Controls ( is a leader in environmental monitoring and control for critical spaces such as operating rooms, isolation rooms, and laboratories. We create high-performance airflow control solutions that ensure the safety of occupants in environments where advancements to...Hourly payShift work
$65 - $75 per hour
...Role: Internal Controls Specialist SOX Location: Winnipeg, MB Type: Contract(3.5 Months) Rate: CAD65/hr - CAD75/hr Job Description: Role Deliverables The role will include completion of control walkthroughs and design assessments, Assistance management...Contract work- ...the ultimate in peace of mind to those that we serve. Role Summary: Our Winnipeg Branch office is currently recruiting for a Fire System Sales Representative to be responsible for acquiring and maintaining new accounts within a specified territory in Manitoba. The self-...Full timeFor contractorsWork at office
- A technology firm in the automotive sector is seeking a System Simulation/SiL Integration Engineer in Windsor, Ontario. The role demands expertise... ...thermal management, utilizing 1D simulation tools and controls development. The ideal candidate will have a Master's degree and...Contract work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Controls System Simulation Matlab. Be the first to apply!
Related searches
- controle technique automobile Winnipeg, MB
- technicien instrumentation et contrôle Winnipeg, MB
- infection control Winnipeg, MB
- control systems specialist Winnipeg, MB
- access control specialist Winnipeg, MB
- johnson controls Winnipeg, MB
- project control Winnipeg, MB
- pest control Winnipeg, MB
- control and automation engineer Winnipeg, MB
- material control manager Winnipeg, MB

