Life Cycle And Materiel Manager - Marine Mechanical Specialist
Thales Canada
This role is Hybrid, Halifax
Life Cycle and Materiel Manager (LCMM) – Marine Mechanical Specialist
Position Summary
Thales Canada is looking for a Life Cycle and Materiel Manager (LCMM) - Marine Mechanical Specialist to support its non-Combatant In-Service Support Programs for the Royal Canadian Navy.The LCMM – Marine Mechanical Specialist is responsible for engineering support and technical oversight of Marine Propulsion, Steering, Auxiliary and other mechanical systems on board the various platforms of the Royal Canadian Navy. Accountable to the Operational Support Manager and working directly with various internal and external stakeholders, this role manages various activities to establish and maintain the configuration and design intent of the marine auxiliary and other mechanical systems on the ships and manage any changes through their end-of-life and divestment.The successful candidate will leverage their existing knowledge and expertise in marine mechanical systems and equipment to become a subject matter expert and main point of contact for all technical matters associated with the systems assigned thereto. The principal objective is to maximize effectiveness and efficiency, while minimizing the Life Cycle Cost (LCC) associated with the support of their systems.Regulatory Compliance Requirement
This position requires direct or indirect access to hardware, software or technical information controlled under the Canadian Export Control List and/or the US the Export Administration Regulations (EAR). All applicants must be eligible or able to obtain authorization for such access.Key Areas of Responsibility
Performing Life Cycle and Materiel Management functions including but not limited to equipment obsolescence, material compatibility issues, alternate part investigations, maintenance management, and disposal management;
Supporting and managing activities associated with the design and configuration control of the vessels including conducting functional and physical configuration audits, as well as deviations and waivers documentation;
Providing technical advice to enable auxiliary and mechanical equipment and/or systems to be correctly operated or maintained;
Monitoring systems and equipment performance through various reports such as but not limited to Unsatisfactory Condition Reports (UCRs), Pre-installation failures (PIFs) and technical investigations (TIs) conducted by the customer;
Ensuring proper level ofspares are maintained throughout the life of the systems and equipment;
support the cataloguingprocess;
Conducting technical investigations into problems associated with marine auxiliary, propulsion, steering and other mechanical systems, equipment and/or software issues, including failure analysis and solution recommendation;
Developing and reviewingtechnical documentation including equipment specifications, installation and maintenance instructions, test and trials agendas, and engineering change documentation and drawings;
Analyzing requirements associated with baseline changes to the ships configuration, equipment and software;
Liaise with OEMs, Service Providers and ship staff to support the investigation and resolution of defects;
Preparing documented work scopes, suitable for the solicitation of quotations from external resources such as OEMs, manufacturers, suppliers, testing facilities or specialist service providers;
andPreparing and managing Work Packages and cost estimates for customer approval.Minimum Requirements
Minimum education requirements:
3-year technical program diploma (for Technologists) or 2-year technical program diploma (for Technicians) in a marine mechanical technical field offered by a recognized technical institute;
orCertified a technologist or technician by a recognized provincial, state, or federal (national) licensing body in a relevant field or certified body;
orCertified as one of the following marine technical trades of the Canadian Armed Forces:
RQ-PO1 or RQ-PO2 Marine TechnicianQL 6A or 7 Marine Engineer
Possess a minimum 8 years of demonstrated professional work experience in the naval, marine, or offshore industry within the last 15 years;
Extensive knowledge of marine auxiliary systems including but not limited to Propulsion, Steering Systems, Black and Gray Water, HVAC, RefrigerationWorking knowledge of Microsoft Office Suite;
Familiar with safety standards;
Strong communication skills (oral and written);
Language: English (Essential).Preferred Qualifications
Minimum 10 years of experience as a Technical Specialist with marine mechanical systems;
Previous experience withthe Royal Canadian Navy or Canadian Coast Guard;
Previous experience as aLife Cycle Materiel Manager in the marine mechanical field;
Demonstrated project management experience;
Familiar with IntegratedPlatform Management System (IPMS)Familiar with the Department of National Defense (DND) maintenance management and implementation system “DRMIS”;
Experience in deliveringmarine in-service support of operational assets;
andFamiliar with certification requirements including but not limited to Classification Society, SOLAS/IMO, IEEE, CSA, Naval Ship Code, and DND regulations.Physical Demands
Predominantly office work but will be required to occasionally travel to and work in dockyards and onboard Naval shipsMay be required to undertake inspections on Naval ships which may involve involving bending and twisting, and working aloftSpecial Position Requirements
Schedule: 40 hours per weekTravel: Occasional domestic or international travel may be required in support of the ships
#J-18808-Ljbffr
Life Cycle and Materiel Manager (LCMM) – Marine Mechanical Specialist
Position Summary
Thales Canada is looking for a Life Cycle and Materiel Manager (LCMM) - Marine Mechanical Specialist to support its non-Combatant In-Service Support Programs for the Royal Canadian Navy.The LCMM – Marine Mechanical Specialist is responsible for engineering support and technical oversight of Marine Propulsion, Steering, Auxiliary and other mechanical systems on board the various platforms of the Royal Canadian Navy. Accountable to the Operational Support Manager and working directly with various internal and external stakeholders, this role manages various activities to establish and maintain the configuration and design intent of the marine auxiliary and other mechanical systems on the ships and manage any changes through their end-of-life and divestment.The successful candidate will leverage their existing knowledge and expertise in marine mechanical systems and equipment to become a subject matter expert and main point of contact for all technical matters associated with the systems assigned thereto. The principal objective is to maximize effectiveness and efficiency, while minimizing the Life Cycle Cost (LCC) associated with the support of their systems.Regulatory Compliance Requirement
This position requires direct or indirect access to hardware, software or technical information controlled under the Canadian Export Control List and/or the US the Export Administration Regulations (EAR). All applicants must be eligible or able to obtain authorization for such access.Key Areas of Responsibility
Performing Life Cycle and Materiel Management functions including but not limited to equipment obsolescence, material compatibility issues, alternate part investigations, maintenance management, and disposal management;
Supporting and managing activities associated with the design and configuration control of the vessels including conducting functional and physical configuration audits, as well as deviations and waivers documentation;
Providing technical advice to enable auxiliary and mechanical equipment and/or systems to be correctly operated or maintained;
Monitoring systems and equipment performance through various reports such as but not limited to Unsatisfactory Condition Reports (UCRs), Pre-installation failures (PIFs) and technical investigations (TIs) conducted by the customer;
Ensuring proper level ofspares are maintained throughout the life of the systems and equipment;
support the cataloguingprocess;
Conducting technical investigations into problems associated with marine auxiliary, propulsion, steering and other mechanical systems, equipment and/or software issues, including failure analysis and solution recommendation;
Developing and reviewingtechnical documentation including equipment specifications, installation and maintenance instructions, test and trials agendas, and engineering change documentation and drawings;
Analyzing requirements associated with baseline changes to the ships configuration, equipment and software;
Liaise with OEMs, Service Providers and ship staff to support the investigation and resolution of defects;
Preparing documented work scopes, suitable for the solicitation of quotations from external resources such as OEMs, manufacturers, suppliers, testing facilities or specialist service providers;
andPreparing and managing Work Packages and cost estimates for customer approval.Minimum Requirements
Minimum education requirements:
3-year technical program diploma (for Technologists) or 2-year technical program diploma (for Technicians) in a marine mechanical technical field offered by a recognized technical institute;
orCertified a technologist or technician by a recognized provincial, state, or federal (national) licensing body in a relevant field or certified body;
orCertified as one of the following marine technical trades of the Canadian Armed Forces:
RQ-PO1 or RQ-PO2 Marine TechnicianQL 6A or 7 Marine Engineer
Possess a minimum 8 years of demonstrated professional work experience in the naval, marine, or offshore industry within the last 15 years;
Extensive knowledge of marine auxiliary systems including but not limited to Propulsion, Steering Systems, Black and Gray Water, HVAC, RefrigerationWorking knowledge of Microsoft Office Suite;
Familiar with safety standards;
Strong communication skills (oral and written);
Language: English (Essential).Preferred Qualifications
Minimum 10 years of experience as a Technical Specialist with marine mechanical systems;
Previous experience withthe Royal Canadian Navy or Canadian Coast Guard;
Previous experience as aLife Cycle Materiel Manager in the marine mechanical field;
Demonstrated project management experience;
Familiar with IntegratedPlatform Management System (IPMS)Familiar with the Department of National Defense (DND) maintenance management and implementation system “DRMIS”;
Experience in deliveringmarine in-service support of operational assets;
andFamiliar with certification requirements including but not limited to Classification Society, SOLAS/IMO, IEEE, CSA, Naval Ship Code, and DND regulations.Physical Demands
Predominantly office work but will be required to occasionally travel to and work in dockyards and onboard Naval shipsMay be required to undertake inspections on Naval ships which may involve involving bending and twisting, and working aloftSpecial Position Requirements
Schedule: 40 hours per weekTravel: Occasional domestic or international travel may be required in support of the ships
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Life Cycle And Materiel Manager - Marine Mechanical Specialist in Winnipeg, MB vacancy
- Thales Canada Inc., Defence and Security Life Cycle and Materiel Manager - Marine Electrical Specialist (Engineering)Life Cycle and Materiel Manager - Marine Electrical Specialist (Engineering)Location: Halifax - Wilkinson, CanadaIn fast changing markets, customers worldwide...MarineLong term contractFull timeTemporary workWork at officeLocal areaWorldwide
$98.05k - $122.56k per year
...organization that licenses and regulates the activities of over 50,000 life and general insurance agents, general insurance salespersons,... ...employment opportunities The OpportunityThe Application Life Cycle Manager is responsible for the disciplined operation, governance, and...SuggestedWork at officeImmediate start- Support marine mechanical systems as a Mechanical Specialist with AJISS Engineering in hybrid Victoria, British Columbia, using technical oversight and troubleshooting expertise.Based in Victoria, this specialist provides engineering support for Arctic and Offshore Patrol Vessels...Marine
- Job DescriptionAs a Specialist, Marine Mechanical System, you will be responsible for all mechanical/Auxiliary system along with interfacing into an operatable vessel. More specifically you will : Support the engineering department to produce and review drawings, documentation...MarineContract workFor subcontractorLive InWork at office
- Apply mechanical systems expertise in a hybrid Victoria position supporting Arctic and Offshore Patrol... ...technical oversight experience.As a Mechanical Specialist with Thales Canada’s AJISS Engineering team, you will support marine mechanical and auxiliary systems. The work includes...Marine
- As an Expert Marine Mechanical System Specialist, you'll be at the forefront of managing mechanical systems and auxiliary operations. Your expertise will enhance vessel functionality and client satisfaction. This role necessitates a Chief Engineer certificate along with...MarineWork at office
$92k - $142k per year
...provides its customers, who conduct life-saving medical procedures for... ...Overview As our Life Cycle Engineering Lead you will oversee... ...Cycle Engineering activities, manage related projects under the... ...Bachelor’s degree in Engineering (Mechanical, Materials, Chemistry, or...Casual workInternshipLocal areaImmediate startFlexible hours- ...nouvelles exigences en matière de matériel, et formuler ses... ...services de gestion de projets ou du cycle de vie tels que définis par le... ...systems; Assist Equipment Management Team (EMT) and test agency staff... ...expert. Perform other project / life cycle management services, as...Flexible hoursShift workDay shift
- Job Description - Spécialiste du cycle de vie du matériel – Avionique (AVS) (Gatineau)/Life Cycle Materiel Specialist – Avionics Specialty (AVS) (345211) Job Number:345211 Nous sommes plus que des experts en aviation, nous sommes des pionniers. Nous repoussons les limites...
- ...Overview Responsible to the IMP CP140 OWSS Deputy Program Manager for the provision of asset management tasks on CP140... ...and recommending improvements to optimize life-cycle costs. The Asset Management Specialist (AMS), will liaise with personnel throughout IMP, with...
- Thales Canada recherche un spécialiste de la fiabilité pour mener des analyses complètes des coûts du cycle de vie et des taux de défaillance, afin de soutenir les modifications techniques. Le poste est hybride et basé à Kanata-Ottawa, Halifax, N.-É. ou Victoria, C.-B. Le candidat...Marine
- Lead the Life Cycle Engineering team at BWXT Canada and manage critical nuclear projects while ensuring compliance with technical standards. This onsite role in Cambridge, ON, requires strong engineering skills and effective stakeholder communication. As the Life Cycle Engineering...
- Apply life cycle assessment and technical documentation expertise to ICAO’s CORSIA fuel work within the Environmental Standards Section.... ...and Induced Land Use Change values. The work includes database management, technical reporting, and evaluation support for new fuel sources...Work at office
- IMP Aerospace & Defence is seeking an Avionics Engineer to support life‑cycle management of avionics/electrical systems. You will assist design, repair, monitoring, and improvement recommendations under the Avionics Engineering Supervisor. The role involves liaising with customers...Contract work
- OSI Maritime Systems in Burnaby, BC, invites a Mechanical Design Manager to lead the mechanical design function within Hardware Engineering, overseeing... ..., design reviews and ensure conformance to standards for marine navigation and bridge systems. Responsibilities include...Marine
$80k - $140k per year
Manager, Life Insurance Specialist (Contract)Job Category : Insurance Requisition Number : INS30018201 Posted : August 7, 2026 Full-Time LocationsShowing 1 location DescriptionInspirational, innovative and entrepreneurial - this is how we describe our...Permanent employmentFull timeContract workWork at officeImmediate startRemote workFlexible hours- Dometic Marine is seeking a Product Designer – Mechanical in Vancouver, BC to lead end-to-end mechanical and electromechanical design for marine control systems. You will work with engineers, manufacturing and supply chain to deliver robust, production-ready solutions. The...Marine
- IMP Aerospace & Defence is seeking a qualified engineer to oversee Engineering Support, Repair Design and Life-Cycle Management for the CH149 Cormorant aircraft. You will monitor performance, maintain lifecycle cost efficiency and coordinate technical advice with MOBs, DND,...
- Elevate marine design with Dometic as a Product Designer Mechanical in Vancouver. Focus on developing cutting-edge mechanical and electromechanical components that... ...modeling • Lead documentation of designs and test plans • Manage collaboration between engineering and manufacturing...Marine
- RoleAs the Marine Automation Specialist, you will support the design, development, integration, and testing of the Canadian Coast Guard’s future... ...engineering solutions. Ensure compliance with the Corporate Management System (CMS), safety regulations, and best practices....MarineFor subcontractorWork at office
- Become a pivotal member of OSI's engineering team as a Lead Mechanical Engineer for Marine Systems. Drive design efforts, innovate solutions, and... ...Lead studies and tests for navigation and bridge systems • Manage mechanical design based on military-grade and customized solutions...Marine
$100k - $140k per year
...leading engineering firm in maritime systems is seeking a full-time Mechanical Design Technician or Engineer based in North Vancouver.... ...years of relevant experience. The role involves designing custom marine steering systems, executing engineering calculations, and collaborating...MarineFull time- Dometic in Vancouver, BC, seeks a Product Designer-Mechanical to develop mechanical and electromechanical marine control systems. You will own end-to-end design from concept through validation, working with cross-functional teams to ensure robust, production-ready solutions...Marine
- Logistic Support Analysis Engineer (Life Cycle Cost)At Alstom, we understand transport networks and what moves people. From high-speed trains... ...for everyone. Job Segment: Logistics, Lean Six Sigma, Six Sigma, SAP, ERP, Operations, Management, Technology #J-18808-LjbffrLong term contractFull timeWorldwideFlexible hours
- ...documentation and technical problem-solving as a Weir Technologist Specialist serving marine engineering teams in four Canadian locations.This position works within Weir Marine Engineering’s integrated Mechanical Engineering Systems and Equipment team. The successful candidate...MarineWork at office
- ...Engineer to join our team in Toronto to grow our mining advisory practice. You will work on all aspects of the mine life cycle, including planning, design, management, closure, and reprocessing, collaborating with our multi-disciplinary professionals. You will contribute to...
- Support marine engineering changes and shipboard inspections in a hybrid Halifax position... ...Thales Defence and Security.This Technical Specialist role contributes to AJISS Engineering and... .... The position suits certified mechanical professionals with substantial marine experience...Marine
- Support Davie shipbuilding and repair projects through marine welding inspection, fit-up verification, and quality documentation. Apply... ...acceptanceRequirements: Relevant welding, fabrication, marine, mechanical, or technical backgroundStrong shipbuilding, ship repair, or...Marine
$100k - $120k per year
MARINE DIVISION MANAGERLandmark Solutions Ltd. (Landmark) is growing and we’re seeking an experienced Marine Division Manager to lead our Marine Division and manage the delivery of marine and waterfront... ..., delivery risks and the need for specialist input. Work on site as projects...MarinePermanent employmentFull timeFor subcontractorWork at officeFlexible hoursNight shift- Impact the design and testing of Canadian Coast Guard vessels as a Systems Specialist in Marine Engineering at Davie. Drive change management and uphold engineering standards. As a Systems Specialist, you will play a crucial role in the development of six new Program Icebreakers...MarineFor subcontractor
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Life Cycle And Materiel Manager - Marine Mechanical Specialist. Be the first to apply!
Related searches
- responsable atelier mécanique Winnipeg, MB
- mechanical engineering project manager Winnipeg, MB
- mechanical engineering director Winnipeg, MB
- mechanical project manager Winnipeg, MB
- delivery specialist Winnipeg, MB
- asset management specialist Winnipeg, MB
- configuration management specialist Winnipeg, MB
- credit specialist Winnipeg, MB
- building performance specialist Winnipeg, MB
- fire specialist Winnipeg, MB

