Turbomachinery Engineer
$75k - $95k per yearNordSpace Corp.
Engineering - Launch Systems Full Time Markham, ON $75,000 - $95,000 CAD per year
NordSpace( is a Canadian startup with the mission to advance life on Earth, from space.NordSpaceis committed to extremely rapid innovation and development of the most ambitious aerospace projects with the most ambitious team. With divisions spanning everything fromspace robotics to satellites torockets,NordSpaceis driven to bring space closer to Earth and inspire generations of space explorers.
Role purpose:As a Turbomachinery Engineer you will design, analyze, and develop turbopumps and related rotating machinery for liquid rocket engines. You'll work on components that spin at tens of thousands of RPM while pumping cryogenic propellants at extreme pressures, this is one of the most demanding mechanical design challenges in aerospace. This role spans the full lifecycle: concept design, detailed analysis, hardware build, test support, and failure investigation.
The role is idealfor someone who thrives in a fast-paced, hands-on environment and wants to see their designs tested, iterated, and flown.
Core responsibilities
Design and analyze turbopumps (inducers, impellers, turbines, manifolds) for liquid propellant rocket engines.
Perform rotordynamic analysis, including critical speed prediction, bearing/seal dynamics, and whirl stability.
Conduct structural analysis (FEA) of rotating and static components under thermal, pressure, and centrifugal loads.
Perform/Review CFD analysis of pump and turbine flow paths to optimize efficiency and predict cavitation, stall, and off-design performance.
Develop component-level and system-level performance models (pump/turbine maps, cycle balance).
Select and size bearings, seals, and dampers for high-speed cryogenic or hot-gas environments.
Support hardware fabrication, assembly, and instrumentation planning.
Support hot-fire and component testing;
analyze test data and correlate against predictions.
Investigate anomalies and failures and drive root-cause corrective actions.
Collaborate cross-functionally with combustion devices, structures, mechanical, and systems engineering teams.
Contribute to design reviews, technical documentation, and requirements verification.
Work closely with suppliers and vendors on custom hardware procurement when needed.
Qualifications
Bachelor’s degree in Aerospace, Mechanical, Nuclear or a closely related engineering discipline;
Master’sdegree is an asset.
3+ years ofhands onexperience in turbomachinery, rotating equipment, or fluid machinery design (e.G., gas turbines, high pressure chemical process equipment, combustion systems).
Demonstrated experience owning design, analysis, and delivery from concept to hardware.
Working knowledge of rotordynamics, bearing/seal design, and rotating structural analysis.
Strong background in fluid dynamics, heat transfer, combustion, and structural mechanics as applied to high pressure,high temperaturehardware.
Proficiencywith 3D CAD tools for complex assemblies and detailedcomponentdesign, and fluency with GD&T compliant engineering drawings.
Experience with simulation and analysis tools (e.G., FEA, CFD, analytical modeling) for structural, thermal, and fluid performance.
Familiarity with high-speed rotating machinery failure modes and design margins.
Experience defining and supporting manufacturing processes for precision hardware (e.G., machining, welding/brazing, additive manufacturing, surface treatments) in a development or production environment, including design for manufacturability and testability.
Proactive mindset:identifiesblockers (technical, schedule, resource, or process) early and drives them to resolution to keep the program moving.
This posting is for an existing vacancy. Thank you to all who apply. Candidates who are successfully selected for an interview will be notified by email.
Applicants must be legally authorized to work in Canada and able to obtain and maintain a security assessment under the Controlled Goods Program (Defence Production Act) as a condition of their employment.
Compensation will be determined at the Company’s discretion, based on job-related factors, which may include, but are not limited to, relevant knowledge, skills, experience, and education and/or training. NordSpace encourages all qualified applicants to apply, even if the posted salary range does not align with their expectations.
NordSpace is an equal opportunity employer and welcomes applications from all qualified candidates;
all hiring decisions are based on merit and job-related qualifications, without discrimination on any ground protected by the Ontario Human Rights Code. Accommodations are available on request at any stage of the selection process — please contact View email address on ca.hrm.tc .
#J-18808-Ljbffr
NordSpace( is a Canadian startup with the mission to advance life on Earth, from space.NordSpaceis committed to extremely rapid innovation and development of the most ambitious aerospace projects with the most ambitious team. With divisions spanning everything fromspace robotics to satellites torockets,NordSpaceis driven to bring space closer to Earth and inspire generations of space explorers.
Role purpose:As a Turbomachinery Engineer you will design, analyze, and develop turbopumps and related rotating machinery for liquid rocket engines. You'll work on components that spin at tens of thousands of RPM while pumping cryogenic propellants at extreme pressures, this is one of the most demanding mechanical design challenges in aerospace. This role spans the full lifecycle: concept design, detailed analysis, hardware build, test support, and failure investigation.
The role is idealfor someone who thrives in a fast-paced, hands-on environment and wants to see their designs tested, iterated, and flown.
Core responsibilities
Design and analyze turbopumps (inducers, impellers, turbines, manifolds) for liquid propellant rocket engines.
Perform rotordynamic analysis, including critical speed prediction, bearing/seal dynamics, and whirl stability.
Conduct structural analysis (FEA) of rotating and static components under thermal, pressure, and centrifugal loads.
Perform/Review CFD analysis of pump and turbine flow paths to optimize efficiency and predict cavitation, stall, and off-design performance.
Develop component-level and system-level performance models (pump/turbine maps, cycle balance).
Select and size bearings, seals, and dampers for high-speed cryogenic or hot-gas environments.
Support hardware fabrication, assembly, and instrumentation planning.
Support hot-fire and component testing;
analyze test data and correlate against predictions.
Investigate anomalies and failures and drive root-cause corrective actions.
Collaborate cross-functionally with combustion devices, structures, mechanical, and systems engineering teams.
Contribute to design reviews, technical documentation, and requirements verification.
Work closely with suppliers and vendors on custom hardware procurement when needed.
Qualifications
Bachelor’s degree in Aerospace, Mechanical, Nuclear or a closely related engineering discipline;
Master’sdegree is an asset.
3+ years ofhands onexperience in turbomachinery, rotating equipment, or fluid machinery design (e.G., gas turbines, high pressure chemical process equipment, combustion systems).
Demonstrated experience owning design, analysis, and delivery from concept to hardware.
Working knowledge of rotordynamics, bearing/seal design, and rotating structural analysis.
Strong background in fluid dynamics, heat transfer, combustion, and structural mechanics as applied to high pressure,high temperaturehardware.
Proficiencywith 3D CAD tools for complex assemblies and detailedcomponentdesign, and fluency with GD&T compliant engineering drawings.
Experience with simulation and analysis tools (e.G., FEA, CFD, analytical modeling) for structural, thermal, and fluid performance.
Familiarity with high-speed rotating machinery failure modes and design margins.
Experience defining and supporting manufacturing processes for precision hardware (e.G., machining, welding/brazing, additive manufacturing, surface treatments) in a development or production environment, including design for manufacturability and testability.
Proactive mindset:identifiesblockers (technical, schedule, resource, or process) early and drives them to resolution to keep the program moving.
This posting is for an existing vacancy. Thank you to all who apply. Candidates who are successfully selected for an interview will be notified by email.
Applicants must be legally authorized to work in Canada and able to obtain and maintain a security assessment under the Controlled Goods Program (Defence Production Act) as a condition of their employment.
Compensation will be determined at the Company’s discretion, based on job-related factors, which may include, but are not limited to, relevant knowledge, skills, experience, and education and/or training. NordSpace encourages all qualified applicants to apply, even if the posted salary range does not align with their expectations.
NordSpace is an equal opportunity employer and welcomes applications from all qualified candidates;
all hiring decisions are based on merit and job-related qualifications, without discrimination on any ground protected by the Ontario Human Rights Code. Accommodations are available on request at any stage of the selection process — please contact View email address on ca.hrm.tc .
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Turbomachinery Engineer in Winnipeg, MB vacancy
- Elevate your career with Worley as a Specialist Mechanical Engineer in Turbomachinery, based in Edmonton, Alberta. You will provide expert technical leadership for complex projects and systems. As a Specialist Mechanical Engineer, you will serve as the top authority for turbomachinery...Suggested
- Job Description - Specialist Mechanical Engineer - Turbomachinery (CAL01QU) Specialist Mechanical Engineer - Turbomachinery - CAL01QU Company: Worley Primary LocationOther LocationsCAN-AB-Edmonton JobMechanical ScheduleFull-time Employment Type: Employee...SuggestedRemplacementLong term contractImmediate start
- Explore a unique role at NordSpace as a Turbomachinery Engineer based in Markham, ON. Focus on designing sophisticated turbopumps for state-of-the-art liquid rocket engines. NordSpace is dedicated to pushing the frontiers of aerospace technology and seeks a Turbomachinery Engineer...SuggestedFull time
- A leading engineering firm is seeking a Hydro Mechanical Engineer to join their team in Calgary, Alberta. This position involves responsibility for mechanical design and commissioning of hydro turbines and associated systems. The ideal candidate will have strong design expertise...SuggestedRemote work
- About the roleCanada Rocket Company is building the turbomachinery that drives our 750 kN engine. We’re looking for a Turbomachinery CAD/GD&T/Stack-up Designer to take preliminary designs from our mechanical engineers and turn them into release-ready hardware definition. You...SuggestedContract work
- ...what matters. The OpportunityReporting to the Manager of the Turbomachinery Category Team, the Category Specialist will manage an original... ...with Project teams, Business Units, Fleet Specialists, Engineering, Legal and suppliers, this role aligns equipment procurement with...RemplacementLong term contractContract workWork at officeFlexible hours
- Turbomachinery controls expertise leads this Senior Account Manager role at Honeywell Technologies, serving customers across the Canadian territory... ...account management or sales experienceBachelor’s degree in an engineering discipline or equivalentExperience in oil and gas, mining,...
- Canada Rocket Company is seeking a Turbomachinery Designer – Draftsman to lead drafting for our turbopump hardware. You will own 3D models, 2D drawings, GD&T schemes, and stack‑ups, coordinating with design, analysis, manufacturing, and suppliers. You will shape the drafting...
- Job DescriptionThe Senior Account Manager for Turbomachinery control (CCC) will exhibit genuine interest in solving work problems through proactively... ...controls or industrial automation business as a project engineer, application engineer or field service engineer or a similar...Contract workInternshipWork at office
- Worley is seeking a Specialist Mechanical Engineer - Turbomachinery to lead technical governance across capital projects. Candidates should have extensive experience in high-speed rotating equipment and be recognized as a technical authority in turbomachinery. The role includes...Full time
- ...designs against fit, form, and function while engaging other engineering team members to delivery of an optimized solution that meets project... ...if based out of Canada About The Team Our SGT-A35 Turbomachinery team consists of a 20-person team consisting of Team Leads, Designers...Daily paidRemote workFlexible hours
- Join Canada Rocket Company as an Expert Turbomachinery Designer, specializing in CAD and GD&T. This role offers a unique hands-on experience... ...in turbopump testing and inspections • Skill in translating engineering analysis into CAD requirements Bring your expertise in turbomachinery...
- ...shared commitment drives how we work, grow and lead in the construction industry. Why Choose PCL? Grow your career as an Engineering Student at our Winnipeg district in Winnipeg, Manitoba , with the support you deserve. At PCL, we invest in your learning,...Hourly payWeekly payFull time
- ...Requisition ID: 101798 Job Category: Engineering Location: Winnipeg, MB, Canada Join a company that is passionately committed to the pursuit of a better world through positive change. With more than 70 years of business and technical expertise in mining , energy...Long term contractWork at officeLocal areaFlexible hours
- Do you have extensive experience in turbomachinery design, have you worked in aero-engine development and integration, and would you like to progress and develop new skills? Then this job is for you! The A220 commercial aircraft Programme is looking for a Engine Integration...Work at officeWorldwideOverseas
- ENTRUST Solutions Group is looking for a Hydro Mechanical Engineer with strong design and commissioning expertise in hydro turbines and... ...(with emphasis in stress analysis, mechanical design or turbomachinery). Minimum 7–12 years of experience in hydropower. Strong...Work at officeRemote workWork from homeFlexible hours
- ...will report to the Manager, P&C/Tel Strategy and Standards and join the Protection & Control (P&C) Asset Management team as a Senior Engineer. The P&C Asset Management team has responsibility for the following functions: Assist with Planning, developing and maintaining asset...RemplacementPermanent employmentFull timeImmediate startFlexible hours
- ...communities more equitable, resilient, and livable. Our multidisciplinary team covers planning and urban design, civil and stormwater engineering, landscape architecture, private site development, and construction management. We work with a diverse group of clients in land and...Contract workWork at officeLocal areaFlexible hours
- ...Your Opportunity: The successful candidate for this Structural Engineer – Buildings position will provide technical expertise in structural buildings systems with a focus on water/wastewater projects. The work will be to support the water business line. The work will a mixture...Work at officeFlexible hours
- ...Job Description Senior Manufacturing Engineer (Silent-Aire) Build your best future with the Johnson Controls team As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine building performance to serve people, places, and the planet...Worldwide
- Role PurposeThe CFD Engineer owns the aerodynamic and aerothermal analysis capability for NordSpace's launch vehicle, SHARP hypersonic... ...flow CFD, including injectors, regenerative cooling channels, turbomachinery passages, feed‑system transients, and venting analysis....Internship
- ...our societies, and your career. Your Opportunity Stantec is currently seeking a talented and dedicated Transportation/Traffic Engineer to complement and grow our skilled Traffic Engineering and Transportation Planning Team in our Winnipeg, Manitoba office. The opportunity...Work at officeLocal area
- ...Are you ambitious and looking to make the right move in your career? Now is the perfect time to join Egis.We are now over 21,000 engineers, architects, scientists and planners across the world and experiencing substantial growthin North America. This strategic move underscores...Local area
- ...passion, and you’re invited to be a part of that. • Our convenient Price Café offers free Tea and Coffee. Job Summary: A Process Engineer is a professional who serves as a bridge between business needs and technology solutions. They collaborate with stakeholders to...Work at office
- ...day, our team takes pride in rolling up their sleeves to create products that are mindful of the environment. Join us as a Power Engineer 3rd class in Winnipeg and help bring materials to life in a workplace where health and safety always come first. What’s in it for...Hourly payFull timeMonday to fridayShift work
- ...Job Description Overview If you are looking for an employer that has large-scale international engineering projects to offer. If you want to make a difference to a multitude of communities by improving their daily lives. If you want to join an inclusive and diverse team...Full timeInternshipWork at officeFlexible hours
- ...MANUFACTURING ENGINEERING MANAGER Winnipeg, MB Full-Time and Onsite Carfair Composites is a leader in fibre-reinforced plastic design and composite technologies. Carfair Composites is a subsidiary of NFI Group, a leader in propulsion agnostic bus and coach mobility...Long term contractFull timeInternshipWork at officeImmediate startMonday to friday
- ...together as ONE TEAM. The careers we offer are meaningful because the work we do matters. Join us! Job Summary The Associate Process Engineer is responsible for identifying, implementing and leading cross-functional teams within the Mechanical Department to drive process...Long term contractWork at officeLocal areaMonday to friday
- ...education opportunities is our passion, and you're invited to be a part of that. Our convenient Price Café offers free Tea and Coffee! Engineering Automation Designer Price is a forward-thinking organization specializing in engineering automation and product configuration. We...Full time
- ...part of that. • Our convenient Price Café offers free Tea and Coffee. Position Summary Join our AI team as an Intermediate AI Engineer, where you'll build and deploy AI applications, agents, and automation solutions that solve real business problems. You'll work...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Turbomachinery Engineer. Be the first to apply!
Related searches
- solid waste engineer Winnipeg, MB
- voip engineer Winnipeg, MB
- resident engineer Winnipeg, MB
- ingenieur Winnipeg, MB
- certification engineer Winnipeg, MB
- failure analysis engineer Winnipeg, MB
- engineering summer student Winnipeg, MB
- graduate engineer Winnipeg, MB
- junior engineer Winnipeg, MB
- forklift engineer Winnipeg, MB

