Senior Mechanical Designer Can

Senior Mechanical Designer CAN - (ME02.01.CAN.5)Job TitleSenior Mechanical Designer CAN
Organizational UnitLocationWindsor, ON N8Y 1C4 CA (Primary)
CategoryArchitectural/Engineering
Job TypeFull-Time
EducationBachelor's Degree
Travel AvailabilityUp to 25%
Job DescriptionBuild Something That Matters.At Tandem, we believe great architecture and engineering happen when talented people are empowered to challenge convention, think boldly, and work together.
We are a multidisciplinary architecture and engineering firm bringing architects, engineers, designers, and project professionals together to solve complex challenges and create spaces and systems that make an impact.
Our mission is simple:
Challenge convention. Design boldly. Build to inspire.
We're growing, and we're looking for experienced professionals who want more than just their next project. We want people who are curious, collaborative, accountable, and ready to have a real voice in the work they do.
How We WorkThink BoldlyBring ideas to the table. Ask questions. Look for a better way.
Challenge the Expected"We've always done it this way" isn't a reason to stop looking for smarter solutions.
Build with PurposeThe details matter. We design with intention and understand the impact our work has on our clients, communities, and each other.
Own the OutcomeTake responsibility for your work, your projects, and the commitments you make to your team and clients.
Fuel CollaborationThe best solutions don't happen in silos. Our disciplines work together, share knowledge, and solve problems as one team.
Design for ImpactWe don't just deliver drawings. We create solutions that need to work in the real world.
Why Tandem?We're big enough to deliver complex, multidisciplinary projects —
yet small enough to care.
That means experienced professionals have the opportunity to influence projects, mentor the next generation, work directly with clients and leadership, and help shape how we continue to grow.
If you're looking for a place where your experience is valued, your ideas are heard, and you're trusted to make an impact, we'd like to meet you.
We are looking for a
Senior Mechanical Engineer .
Job DescriptionThe Senior Mechanical Engineer is responsible for, but not limited to, the following:
Building Mechanical Systems Design
Lead the design of building mechanical systems, including:heating, ventilation, air conditioning, boilers, chilled water, hydronic systems, compressed air, natural gas, plumbing piping systems, fluid delivery systems, heat pump designs, steam and condensation systems, variable refrigerant systems, fire protection systems and energy conservation initiatives.
Provide technical leadership on projects, ensuring designs meet performance, code, budget, and schedule requirements.
Oversee and review mechanical design work prepared by intermediate and junior team members, providing guidance and mentorship.
Technical Leadership & Innovation
Seek and apply new technology, tools, and methodologies to improve design efficiency, constructability, and lifecycle performance.
Prepare and review technical reports, engineering documents, and value engineering analyses.
Develop and maintain standards, guidelines, and best practices for mechanical design within the team.
Act as the primary mechanical engineering liaison with clients, contractors, and other stakeholders to ensure compliance with project scope and requirements.
Lead client meetings, design presentations, and design coordination sessions with other disciplines.
Provide senior-level technical consultation, including analyzing facility mechanical system problems in the field and recommending practical, cost and energy effective solutions.
Project & Scope Development
Lead the development of mechanical scope of work for new projects, including engineering feasibility studies, owner reviews, and construction bid package development, issue for permit/tender documents and 30-, 60-and 90-day reviews.
Support proposal and fee development for mechanical engineering services.
Provide input into project planning, scheduling, and resource allocation from a mechanical discipline perspective.
Construction Support & Administration
Oversee the shop drawing review process, responses to Requests for Information (RFIs), and preparation of field observation reports to ensure timely processing and alignment with project milestones.
Ensure that construction work is in compliance with mechanical plans, specifications, and applicable codes/standards.
Support commissioning activities and project close-out, including review of as-built documentation and operational issues.
Lead or oversee mechanical cost estimating for developed scopes of work for assigned projects.
Identify and recommend value engineering opportunities to improve project performance and reduce overall cost.
Provide mentorship, coaching, and technical guidance to intermediate and junior engineers and technologists.
Contribute to a collaborative, multi-discipline, team-based environment and help build internal mechanical engineering capabilities.
Travel
Frequent travel, including international travel, to client sites and facilities as required.
Job RequirementsEducation & Professional Designation
Bachelor’s degree in Mechanical Engineering or a Mechanical Engineering Technology diploma with equivalent experience.
Valid P.Eng designation in Ontario (required).CET with extensive relevant experience may be considered for a senior technologist track.
Experience
Minimum 7–10 years of mechanical engineering design experience in building systems, including:heating, ventilation, air conditioning, boilers, hot water, chillers, chilled water pumps, hydronic piping, ductwork layout, natural gas, plumbing, domestic water, sanitary piping, storm piping,heat pump designs, steam and condensation systems, variable refrigerant systems, fire protection systems and energy conservation initiatives
Strong understanding of consulting engineering project phases: feasibility studies, schematic design, detailed design, construction documents, tendering, construction/administration, and project close-out.
Demonstrated experience designing for clients in educational, commercial, industrial, residential and healthcare markets.
Demonstrated senior-level involvement in construction project management, including coordination with contractors and other disciplines.
Codes, Standards & Specifications
Advanced knowledge of local and national codes and standards, including: OBC, NBC, ASHRAE, NFPA, CSA, ASPE, TSSA, etc.
Experience reading, developing, and editing project specifications (NMS, MS, etc.).
Good knowledge and understanding of mechanical systems building design, codes, and specifications, with the ability to interpret and apply them independently.
Familiarity with Ontario and American building codes
Software & Technical Skills
Proficient with AutoCAD and the Autodesk Suite .
Strong experience in Revit for building systems design;
experience with BIM 360is considered an asset.
Experience in selecting HVAC and mechanical equipment and coordinating selections with manufacturers’ representatives.
Experience in heating and cooling load calculations and with HAP, Trace, or similar load analysis software.
Advanced computer skills in Microsoft Office Suite and related programs.
Project & People Skills
Demonstrated ability to lead projects, coordinate multi-discipline teams, and manage multiple projects and priorities simultaneously.
Experience preparing status reports, reviewing specifications and drawings, verifying contractor work,managing project deadlines and project closeouts.
High level of analytical ability to solve unusual and complex mechanical design problems.
Sound management skills and enjoyment of working on the technical aspects of building design projects in a fast-paced, supportive, multi-disciplinary environment.
Some experience in facilities operations and maintenance is an asset.
Soft Skills
High level of professional discipline, self-motivation, and integrity.
Excellent written and verbal communication skills.
Able to communicate ideas and recommendations clearly to both technical and non-technical team members and clients.
Strong planning, organizational, interpersonal, and leadership skills.
Demonstrated ability to work independently with minimal supervision, as well as collaboratively within a team environment.
WEAREANEQUALOPPORTUNITYEMPLOYERCOMMITTEDTODIVERSITYANDACCOMMODATION
Tandemisanequalopportunityemployerthatwelcomesandencouragesapplicationsfromallcandidates.Wearecommittedtodiversityintheworkplace.Allqualifiedapplicantswillreceiveconsiderationforemploymentwithoutregardtorace,color,religion,sex,genderidentity,sexualorientation,nationalorigin,disability,protectedveteranstatus,oranyotherprotectedcharacteristicundergovernmentallawsandregulations.
Accommodationsareavailableuponrequestforallcandidatesparticipatingintherecruitment,selection,andonboardingprocess.
Tandem Group Consulting Solutions, Tandem Engineering Group, and Baird AE are equal opportunity employers that welcome and encourage applications from all candidates. We are committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status, or any other protected characteristic under governmental laws and regulations. Accommodations are available on request for candidates participating in the recruitment, selection, and onboarding process. Only those we are interested in will be contacted.
#J-18808-Ljbffr