R&D Engineer - Mass Timber Connections
My-Ti-Con Timber Connectors Inc. DBA MTC Solutions
R&D Engineer - Mass Timber Connections
MTC Solutions designs, tests, and supplies structural hardware for commercial timber and mass timber construction. Our products include screws, beam hangers, connectors, and connection systems that help engineers and builders connect large timber components safely, efficiently, and reliably.
The R&D Engineer is part of MTC Solutions' Research & Development team, the group responsible for developing new products, generating physical test data, and translating research questions into validated engineering solutions for the mass timber industry. This role is about structural behaviour, physical testing, product performance, engineering judgment, and applied research that leads to better hardware and better design guidance.
This position is intended for an early- to mid-career engineer who enjoys a mix of analysis, experimentation, testing, and product development. You will work with senior technical staff to plan research programs, develop and evaluate connection concepts, coordinate internal and external testing, analyze results, and help turn technical findings into practical recommendations for MTC products and design resources.
What You'll Do
Applied research: Plan and execute engineering investigations related to structural connections, fasteners, timber systems, and product performance.
Product development support: Develop and evaluate new connection concepts and improvements to existing MTC products, working from early technical questions through prototype and validation stages.
Engineering analysis: Perform calculations, analytical modelling, literature reviews, and code-based evaluations to understand structural behaviour and support technical recommendations.
Testing and validation: Develop test plans, coordinate specimens and fixtures, support or execute internal testing, coordinate external laboratory programs, and analyze results.
Hands-on research support: Participate in physical testing work, including specimen preparation, prototype installation, test setup review, instrumentation support, and failure-mode observation.
Data analysis: Interpret experimental results, identify trends and limitations, develop design parameters, and document defensible engineering conclusions.
Prototype and fixture development: Work with engineers, technologists, suppliers, and fabricators to develop prototypes, fixtures, and test setups required for research and product validation.
Codes, standards, and approvals: Support technical work related to CSA O86, NDS, ICC-ES evaluation, CCMC, Eurocode 5, AS/NZS, and other relevant standards or approval pathways.
Project ownership: Take ownership of assigned R&D projects or workstreams, maintaining priorities, schedules, project records, and communication with relevant stakeholders.
Technical documentation: Prepare clear technical summaries, calculation packages, research reports, test documentation, and recommendations that can be reviewed and used by other engineering teams.
Cross-functional collaboration: Work closely with Product Application Engineering, Operations, Technical Service, Business Development, Marketing, suppliers, universities, and external laboratories.
Who You Are
You are a curious engineer who enjoys figuring out why things behave the way they do.
You like the combination of calculations and physical testing, and you are motivated by research that leads somewhere practical: a better product, a stronger design value, a clearer recommendation, or a new solution for the industry.
You are comfortable not knowing the answer immediately. You can gather information, develop a hypothesis or recommendation, test it, learn from the results, and adjust.
You are building confidence in your engineering judgment and want a role where you can take increasing ownership as your experience grows.
You are collaborative, organized, practical, and willing to work directly with physical products, specimens, prototypes, and test setups.
Preferred Qualifications
Bachelor's degree in Civil, Structural, Timber Engineering, or another relevant engineering discipline.
Professional Engineer (P.Eng.) designation, or EIT able to apply for P.Eng. in the near term.
Approximately 2-6 years of relevant structural engineering, applied research, testing, product-development, or building-products experience preferred;
exceptional candidates outside this range will also be considered.
Strong understanding of structural mechanics, load paths, material behaviour, and engineering fundamentals.
Experience with timber engineering, structural connections, fasteners, mass timber, or building products is considered a strong asset.
Experience with physical testing, laboratory research, structural testing, or experimental engineering is considered an asset.
Experience interpreting design codes and standards such as CSA O86, NDS, Eurocode 5, or similar is considered an asset.
Experience with engineering analysis tools, spreadsheets, CAD, or numerical modelling.
Ability to work through open-ended technical problems, form engineering recommendations, and communicate the reasoning behind them.
Strong project-management, organizational, technical writing, and communication skills.
Ability to work independently while seeking appropriate technical review and collaborating effectively with a multidisciplinary team.
Proficiency in English required.
Why This Role Matters
MTC's future products and technical leadership depend on strong applied research. This role helps answer the questions that determine how products are designed, tested, approved, and ultimately used in the field. Your work will help build the technical evidence behind MTC's next generation of mass timber connection solutions.
About MTC Solutions
MTC Solutions is a North American leader in mass timber connection technology. We design, test, and supply structural hardware that helps engineers and builders realize safe, efficient, and beautiful timber structures. Our competitive edge comes from technical credibility, practical problem solving, and our ability to translate complex research into usable design solutions.
We are a small, agile, and passionate team shaping the future of mass timber construction across North America. Your work will directly influence new products, technical approvals, design values, and engineering resources used on real projects.
Closing
We thank all candidates for their interest;
however, only those selected for an interview will be contacted.
#J-18808-Ljbffr
MTC Solutions designs, tests, and supplies structural hardware for commercial timber and mass timber construction. Our products include screws, beam hangers, connectors, and connection systems that help engineers and builders connect large timber components safely, efficiently, and reliably.
The R&D Engineer is part of MTC Solutions' Research & Development team, the group responsible for developing new products, generating physical test data, and translating research questions into validated engineering solutions for the mass timber industry. This role is about structural behaviour, physical testing, product performance, engineering judgment, and applied research that leads to better hardware and better design guidance.
This position is intended for an early- to mid-career engineer who enjoys a mix of analysis, experimentation, testing, and product development. You will work with senior technical staff to plan research programs, develop and evaluate connection concepts, coordinate internal and external testing, analyze results, and help turn technical findings into practical recommendations for MTC products and design resources.
What You'll Do
Applied research: Plan and execute engineering investigations related to structural connections, fasteners, timber systems, and product performance.
Product development support: Develop and evaluate new connection concepts and improvements to existing MTC products, working from early technical questions through prototype and validation stages.
Engineering analysis: Perform calculations, analytical modelling, literature reviews, and code-based evaluations to understand structural behaviour and support technical recommendations.
Testing and validation: Develop test plans, coordinate specimens and fixtures, support or execute internal testing, coordinate external laboratory programs, and analyze results.
Hands-on research support: Participate in physical testing work, including specimen preparation, prototype installation, test setup review, instrumentation support, and failure-mode observation.
Data analysis: Interpret experimental results, identify trends and limitations, develop design parameters, and document defensible engineering conclusions.
Prototype and fixture development: Work with engineers, technologists, suppliers, and fabricators to develop prototypes, fixtures, and test setups required for research and product validation.
Codes, standards, and approvals: Support technical work related to CSA O86, NDS, ICC-ES evaluation, CCMC, Eurocode 5, AS/NZS, and other relevant standards or approval pathways.
Project ownership: Take ownership of assigned R&D projects or workstreams, maintaining priorities, schedules, project records, and communication with relevant stakeholders.
Technical documentation: Prepare clear technical summaries, calculation packages, research reports, test documentation, and recommendations that can be reviewed and used by other engineering teams.
Cross-functional collaboration: Work closely with Product Application Engineering, Operations, Technical Service, Business Development, Marketing, suppliers, universities, and external laboratories.
Who You Are
You are a curious engineer who enjoys figuring out why things behave the way they do.
You like the combination of calculations and physical testing, and you are motivated by research that leads somewhere practical: a better product, a stronger design value, a clearer recommendation, or a new solution for the industry.
You are comfortable not knowing the answer immediately. You can gather information, develop a hypothesis or recommendation, test it, learn from the results, and adjust.
You are building confidence in your engineering judgment and want a role where you can take increasing ownership as your experience grows.
You are collaborative, organized, practical, and willing to work directly with physical products, specimens, prototypes, and test setups.
Preferred Qualifications
Bachelor's degree in Civil, Structural, Timber Engineering, or another relevant engineering discipline.
Professional Engineer (P.Eng.) designation, or EIT able to apply for P.Eng. in the near term.
Approximately 2-6 years of relevant structural engineering, applied research, testing, product-development, or building-products experience preferred;
exceptional candidates outside this range will also be considered.
Strong understanding of structural mechanics, load paths, material behaviour, and engineering fundamentals.
Experience with timber engineering, structural connections, fasteners, mass timber, or building products is considered a strong asset.
Experience with physical testing, laboratory research, structural testing, or experimental engineering is considered an asset.
Experience interpreting design codes and standards such as CSA O86, NDS, Eurocode 5, or similar is considered an asset.
Experience with engineering analysis tools, spreadsheets, CAD, or numerical modelling.
Ability to work through open-ended technical problems, form engineering recommendations, and communicate the reasoning behind them.
Strong project-management, organizational, technical writing, and communication skills.
Ability to work independently while seeking appropriate technical review and collaborating effectively with a multidisciplinary team.
Proficiency in English required.
Why This Role Matters
MTC's future products and technical leadership depend on strong applied research. This role helps answer the questions that determine how products are designed, tested, approved, and ultimately used in the field. Your work will help build the technical evidence behind MTC's next generation of mass timber connection solutions.
About MTC Solutions
MTC Solutions is a North American leader in mass timber connection technology. We design, test, and supply structural hardware that helps engineers and builders realize safe, efficient, and beautiful timber structures. Our competitive edge comes from technical credibility, practical problem solving, and our ability to translate complex research into usable design solutions.
We are a small, agile, and passionate team shaping the future of mass timber construction across North America. Your work will directly influence new products, technical approvals, design values, and engineering resources used on real projects.
Closing
We thank all candidates for their interest;
however, only those selected for an interview will be contacted.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the R&D Engineer - Mass Timber Connections in Winnipeg, MB vacancy
- MTC Solutions is seeking an R&D Engineer to advance mass timber connection technology in British Columbia. You will plan investigations, develop concepts, and coordinate testing with internal teams and external labs to build validated engineering solutions. The role blends...Suggested
- Product Development Engineer - Mass Timber HardwareMTC Solutions designs, tests, and supplies structural hardware for commercial timber and mass... ...Our products include screws, beam hangers, connectors, and connection systems that help engineers and builders connect large timber...Suggested
- ...on high rise residential projects.Red Seal Certification is an assetA relevant degree or certification in construction management, engineering, or a related field is preferred.OSHA certification and other relevant industry certifications are advantageous. Please note that...SuggestedHourly payContract workFor contractorsFor subcontractor
- Drive fabrication design quality for Mercer Mass Timber’s complex assemblies through 3D modeling, quality control, and team mentorship.The Senior DfMA Designer supports Mercer Mass Timber’s VDC/Engineering group and reports to the Fabrication Design Lead. You will oversee detailing...Suggested
- General Contractor in Vancouver seeks an experienced Project Manager to lead residential and mixed projects up to $70m+. You will direct multi-disciplinary teams, manage budgets and schedules, and ensure safety, quality, and profitability across the portfolio. The role reports...SuggestedFor contractors
- ITC Construction in Vancouver is seeking a Site Superintendent to oversee residential high-rise projects from start to finish. You will coordinate subcontractors, suppliers, and project teams to deliver on time, within budget and to ITC quality standards. You will implement ...For subcontractor
$140k per year
...development and operational functions.Completed post-secondary education in Construction, Engineering, or related discipline an asset.Eng., PMP, Passive House, LEED, GSC, Mass Timber or other technical certifications an asset.Training in project specific technical areas for...Long term contractPermanent employmentFull timeContract workTemporary workFor contractorsWork at officeLocal area$89.95k - $156.31k per year
At Capgemini Engineering, the world leader in engineering services, we bring together a global... ...think outside the box as they provide unique R&D and engineering services across all... ...ConsideringWe are seeking a highly skilled AWS Connect Engineer with strong hands-on experience...Full timeLocal areaRemote work$100k - $120k per year
...40 hours per weekShifts: Monday to FridayStatus: Permanent Full-TimeClosing Date: November 13, 2026Position Summary:The R&D Engineer is generally responsible for translating clinical needs from transplant surgeons into product ideas. They research new technologies...RemplacementPermanent employment- ...is recognized for the quality of its products, its technical expertise, and its human and collaborative corporate culture. As an R&D Engineer within our Engineering Research and Development Laboratory, you will be responsible for the design, commissioning and optimization...
$80k - $88k per year
...Date: Oct 1, 2026 (or earlier) Who We AreVelocity Bolting designs engineered products that solve the most complex bolting problems in the... ...over the next twelve months, and we're designing and building a new R&D lab to support them. You're joining early enough to shape how...Long term contractPart timeInternshipFlexible hours$90k - $130k per year
...create high-efficiency, low-loss optical connections for photonic integrated circuits. Our technology... ...funding programs, we are scaling from an R&D team into a product company. We move fast... ...Role We are looking for a Photonics Engineer, R&D, to support the optical design team...Internship- ...work both independently and as a part of a Research & Development (R&D) team. The work model for the role is: onsite This role is... ...in own competence area by performing a variety of technology/engineering assignments, mainly in research and development (R&D) Breaker, Switch...
- ...Synopsys, we drive the innovations that shape the way we live and connect. Our technology is central to the Era of Pervasive Intelligence,... ...innovation. You Are: You are a Staff-level web engineer and technical leader who thrives in a small, highly effective team...Long term contractFull time
- Lancesoft in Canada is seeking a Verification Specialist with mass spectrometry experience to plan and conduct verification across software products within an agile team. The role emphasizes ensuring exit criteria are met and adherence to development practices. You will use...
- ...innovative work part of your extraordinary career.Learn more about our AABG and AWS at Accenture here: Description As an AWS Connect Engineer, you will lead the design, implementation, and optimization of AWS Connect solutions to support enterprise cloud transformation and...Full timeWork at officeLocal area2 days per week3 days per week
- Lead mechanical R&D in Squamish, BC, using advanced 3D CAD and hands-on fabrication to... ...experienced builder with 7+ years of mechanical engineering experience. You will create detailed... ...assemblies, test materials, and connect creative design intent with production execution...Full time
- Bombardier is seeking a seasoned Mass Properties Engineer in Quebec, Canada, to support aircraft development projects and participate in weight, CG envelopes, and mass distribution analyses. You will develop Mass Properties tools, contribute to weight targets, and supervise...
- Superviseur de projet, Bioanalyses, R&D/Validation, Spectrométrie de Masse, Ville de Québec Syneos Health® est une organisation de premier plan, entièrement intégrée, spécialisée dans les services en sciences de la vie, conçue pour accélérer le succès de ses clients. Nous...Contract workWorldwide
- Design mass spectrometer technologies at SCIEX in Concord, Ontario, using systems engineering and analytical instrumentation expertise. This is an on-site opportunity.As a Senior Systems Engineer, you will support product development from concept through launch. The role combines...
- ...global repeatability. To know more about our Data Centers Infrastructure solutions please visit is seeking a highly motivated Connectivity Engineer to support the delivery of hyperscale data center projects across North America. This role serves as the technical authority...For contractorsWork at officeWorldwideRelocation
- Job Technical Expert, Engineering, Mass Properties Posting Start Date: 9/22/26 Requisition ID: 15625 Dorval, QC, CAN, H4S 1Y9 Primary Location Administrative Centre (CA) Organization Aerospace Canada Shift Day job Employee Status Regular Requisition...Work at officeShift work
- We AreSynopsys is the leader in engineering solutions from silicon to systems, enabling customers to rapidly innovate AI-powered products. We... ...customers across a wide range of industries to maximize their R&D capability and productivity, powering innovation today that ignites...
- ...work both independently and as a part of a Research & Development (R&D) team.The work model for the role is: onsiteThis role is... ...Mandatory) Bachelor's degree or above in Electronics, Electrical Engineering, Automation, or a related field.Strong skills in schematic design...
- ...Element5 as a Lumber Procurement Specialist, supporting innovative mass-timber construction. This hybrid position in Ontario is crucial for... ...build strong relationships with sawmills and collaborate with engineering and quality teams to enhance operational effectiveness. Your...Work at office
$70k - $90k per year
Ultrasound Transducer R&D EngineerRole Summary The Ultrasound Transducer Developer designs, simulates, prototypes, and characterizes... .../test, and design transfer in close collaboration with process engineering and electronics teams.Key Responsibilities Own acoustic/...Long term contract- Engineer/Scientist packaging - R&D Location: Vaudreuil-Dorion, Quebec, CA, J7V-8P7Job Function: Engineering R&DJob Country: CanadaJob Type: Regular Full TimeEnable your future through light.Excelitas is a global technology leader with more than 7,500 employees, focused on...
- ...reliable solutions in the metals and also through the well-known TAKRAF and DELKOR brands in the mining industries.Your role in Tenova: R&D Engineer- Data Scientist Description: Job SummaryThe R&D Engineer - Data Science, under the direction of the R&D Manager, is...InternshipWorldwide
- Advance your career with SepPure Technologies as a Research Engineer dedicated to developing innovative filtration technologies. Drive sustainability in chemical separation processes. As a Research Engineer, you will play a key role in advancing membrane separation technology...
$84.1k - $113.7k per year
Job Description Summary Are you looking to use your engineering experience in a purpose-driven role? At STEMCELL Technologies, Canada's largest biotechnology company, your work will have a direct and positive impact on advancing scientific research in fields such as cancer...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to R&D Engineer - Mass Timber Connections. Be the first to apply!
Related searches
- mechanical product design / development engineer Winnipeg, MB
- system development engineer Winnipeg, MB
- r&d engineer Winnipeg, MB
- product development engineer Winnipeg, MB
- mechanical product design / development engineer
- system development engineer
- r&d engineer
- r&d engineer entry level
- product development engineer

