Power Electronics Engineer
$95.68k per yearForeseeson Technology
Foreseeson Technology Inc. is a multifaceted, award-winning technology innovator providing electronic manufacturing, IT security distribution, electric vehicle charging equipment, and Intelligent software platforms for EV Charger and Energy Management System. Foreseeson has experienced over 25 years of continuous growth through innovation and we are also known for pioneering green technology to lower our carbon footprint through electric vehicle charging partnerships with municipalities and corporations.
About the Project
Foreseeson Technology Inc. is developing a modular Energy Storage System (ESS) using high-voltage battery packs. The system combines battery management, power conversion, embedded control, charging and discharging coordination, and local and cloud-connected monitoring.
The project includes the evaluation and integration of power conversion equipment, with an emphasis on safe operation, independent battery control, efficient energy flow, modularity, and future product certification.
Foreseeson is seeking a Power Electronics Engineer to develop, evaluate, integrate, and validate the power conversion architecture required for the ESS prototype and its future commercial configurations..
Core accountabilities and Responsibilities
Develop and evaluate the power electronics architecture connecting battery packs, DC-DC converters, charging and power distribution modules, inverter, and AC input/output interfaces.
Define electrical requirements for voltage ranges, current limits, power ratings, conversion efficiency, operating modes, and protection coordination.
Assess suitable unidirectional and bidirectional DC-DC converter topologies for interfacing individual battery packs with the system DC bus.
Investigate approaches to operating battery packs with different states of health, available capacity, and voltage characteristics.
Evaluate off-the-shelf power conversion equipment and assess its suitability for the intended electrical, control, communication, safety, and certification requirements.
Collaborate with the Senior Electrical Engineer and Embedded Systems Engineer to define converter interfaces, control signals, telemetry, and fault-handling requirements.
Battery Charging and Power Distribution
Develop and validate power conversion requirements for charging and discharging multiple battery packs.
Evaluate charger and power distribution modules, considering compatibility, efficiency, cost, and integration risks.
Evaluate charging and discharge power limits, current sharing, converter operating windows, and battery-specific constraints.
Develop test plans for converter performance, battery-side and DC-bus behaviour, transient response, protection functions, and thermal performance.
Investigate power-flow coordination strategies that support independent battery control and efficient system operation.
Inverter and AC Output Integration
Evaluate and integrate an appropriate inverter for converting battery-side DC power to regulated AC output.
Support bidirectional power conversion where required by the selected system architecture and equipment capabilities.
Develop requirements for three-phase 208 VAC and 480 VAC outputs, including rated power, voltage and frequency regulation, load characteristics, and interface protection.
Evaluate grid-connected and backup-power operating modes, including applicable transfer, synchronization, anti-islanding, and interconnection requirements.
Verify compatibility between the inverter, battery-side converters, system controller, AC inputs, and downstream loads.
Electrical Protection, Safety, and Thermal Performance
Define and evaluate power electronics protection requirements, including overcurrent, overvoltage, undervoltage, short-circuit, overtemperature, and abnormal operating conditions.
Coordinate isolation, grounding, pre-charge, contactor sequencing, emergency shutdown, and fault-response requirements with the electrical and embedded systems teams.
Evaluate semiconductor and converter thermal performance, cooling requirements, derating, and component operating limits.
Apply high-voltage laboratory safety procedures when conducting power conversion tests.
Support electrical hazard assessments, DFMEA, risk reduction, and system-level safety reviews.
Contribute to the technical preparation required for applicable CSA, UL, IEC, and utility-interconnection assessments.
Simulation, Prototype Testing, and Validation
Use circuit simulation and engineering analysis tools such as LTspice, PSpice, MATLAB/Simulink, or equivalent to assess converter performance and operating behaviour.
Conduct or support bench and system-level testing using oscilloscopes, power analyzers, electronic loads, current and voltage probes, and suitable high-voltage test equipment.
Measure and analyze conversion efficiency, voltage/current regulation, ripple, transient response, power quality, and thermal performance.
Troubleshoot integration problems involving battery packs, converters, charging equipment, inverter, and control interfaces.
Document test methods, measured results, technical risks, design changes, and recommendations.
Work with the multidisciplinary team to progress the UBESS from prototype integration toward a reliable, manufacturable, and certification-ready design.
Requirements and Qualifications
Bachelor's degree in Electrical Engineering, Power Electronics, or a closely related discipline. A master's degree is an asset.
At least three years of professional experience in power electronics engineering.
Demonstrated experience in low-voltage and/or high-voltage electrical system design and integration.
Strong understanding of DC power systems, power conversion topologies, and converter operating principles.
Experience with energy storage system design, integration, testing, or commissioning.
Working knowledge of battery safety considerations and product certification processes.
Familiarity with EV charging systems and relevant standards or communication protocols, such as CCS, CHAdeMO, or OCPP, as applicable to the selected equipment.
Proficiency with circuit simulation tools such as LTspice, PSpice, MATLAB/Simulink, or equivalent.
Ability to read and interpret electrical schematics, component datasheets, and technical standards.
Strong analytical, troubleshooting, and problem-solving skills.
Ability to prepare technical reports, test documentation, and engineering specifications.
Preferred Qualifications
Experience with bidirectional DC-DC converters, bidirectional AC-DC converters, battery inverters, or grid-connected energy storage systems.
Experience with high-voltage battery packs, battery-level power conversion, contactors, pre-charge circuits, and electrical isolation.
Experience with UL/IEC certification processes for battery systems, inverters, or power electronics equipment.
Hands-on laboratory testing experience using oscilloscopes, power analyzers, electronic loads, and high-voltage safety equipment.
Familiarity with thermal management, component derating, cooling design, and enclosure integration for power electronics.
Experience with three-phase AC systems, power quality, grid-interconnection requirements, and backup-power operation.
Experience working in a fast-paced, cross-functional hardware and product development environment.
Why join Foreseeson?
We offer a challenge-rich environment where you can leverage your business development background to make a tangible impact on the bottom line.
At Foreseeson, we value great work ethics and the ability to work well with diverse teams. If you are ready to build and scale an established EMS company through establishing meaningful relationships, we want to hear from you.
What We Offer
When you join our team, you are not just starting a job - you are becoming part of a community. We are committed to supporting your growth, celebrating your achievements, and helping you build a meaningful career.
Competitive pay
Paid time off
Opportunities for skill development and career advancement
A culture that values respect, teamwork, and diversity
Employee events and engagement initiatives
Recognition programs to appreciate your hard work
We are an equal opportunity employer committed to fostering an inclusive, diverse, and respectful workplace, and we welcome applications from all qualified individuals.
We are committed to providing reasonable accommodations throughout the recruitment, selection, and employment process. If you require accommodation at any stage of the hiring process, please contact View email address on ca.hrm.tc so that we can work with you to meet your needs.
Employment Type:
1-year contract, with the potential for extension or conversion to a permanent, full-time position.
Expected Salary:
CA$95,680 per year. The final salary will be determined based on the successful candidate’s qualifications, relevant experience, and overall fit for the role.
*We would like to thank all applicants in advance for your interest in this position. Only candidates selected for an interview will be contacted.
#J-18808-Ljbffr
About the Project
Foreseeson Technology Inc. is developing a modular Energy Storage System (ESS) using high-voltage battery packs. The system combines battery management, power conversion, embedded control, charging and discharging coordination, and local and cloud-connected monitoring.
The project includes the evaluation and integration of power conversion equipment, with an emphasis on safe operation, independent battery control, efficient energy flow, modularity, and future product certification.
Foreseeson is seeking a Power Electronics Engineer to develop, evaluate, integrate, and validate the power conversion architecture required for the ESS prototype and its future commercial configurations..
Core accountabilities and Responsibilities
Develop and evaluate the power electronics architecture connecting battery packs, DC-DC converters, charging and power distribution modules, inverter, and AC input/output interfaces.
Define electrical requirements for voltage ranges, current limits, power ratings, conversion efficiency, operating modes, and protection coordination.
Assess suitable unidirectional and bidirectional DC-DC converter topologies for interfacing individual battery packs with the system DC bus.
Investigate approaches to operating battery packs with different states of health, available capacity, and voltage characteristics.
Evaluate off-the-shelf power conversion equipment and assess its suitability for the intended electrical, control, communication, safety, and certification requirements.
Collaborate with the Senior Electrical Engineer and Embedded Systems Engineer to define converter interfaces, control signals, telemetry, and fault-handling requirements.
Battery Charging and Power Distribution
Develop and validate power conversion requirements for charging and discharging multiple battery packs.
Evaluate charger and power distribution modules, considering compatibility, efficiency, cost, and integration risks.
Evaluate charging and discharge power limits, current sharing, converter operating windows, and battery-specific constraints.
Develop test plans for converter performance, battery-side and DC-bus behaviour, transient response, protection functions, and thermal performance.
Investigate power-flow coordination strategies that support independent battery control and efficient system operation.
Inverter and AC Output Integration
Evaluate and integrate an appropriate inverter for converting battery-side DC power to regulated AC output.
Support bidirectional power conversion where required by the selected system architecture and equipment capabilities.
Develop requirements for three-phase 208 VAC and 480 VAC outputs, including rated power, voltage and frequency regulation, load characteristics, and interface protection.
Evaluate grid-connected and backup-power operating modes, including applicable transfer, synchronization, anti-islanding, and interconnection requirements.
Verify compatibility between the inverter, battery-side converters, system controller, AC inputs, and downstream loads.
Electrical Protection, Safety, and Thermal Performance
Define and evaluate power electronics protection requirements, including overcurrent, overvoltage, undervoltage, short-circuit, overtemperature, and abnormal operating conditions.
Coordinate isolation, grounding, pre-charge, contactor sequencing, emergency shutdown, and fault-response requirements with the electrical and embedded systems teams.
Evaluate semiconductor and converter thermal performance, cooling requirements, derating, and component operating limits.
Apply high-voltage laboratory safety procedures when conducting power conversion tests.
Support electrical hazard assessments, DFMEA, risk reduction, and system-level safety reviews.
Contribute to the technical preparation required for applicable CSA, UL, IEC, and utility-interconnection assessments.
Simulation, Prototype Testing, and Validation
Use circuit simulation and engineering analysis tools such as LTspice, PSpice, MATLAB/Simulink, or equivalent to assess converter performance and operating behaviour.
Conduct or support bench and system-level testing using oscilloscopes, power analyzers, electronic loads, current and voltage probes, and suitable high-voltage test equipment.
Measure and analyze conversion efficiency, voltage/current regulation, ripple, transient response, power quality, and thermal performance.
Troubleshoot integration problems involving battery packs, converters, charging equipment, inverter, and control interfaces.
Document test methods, measured results, technical risks, design changes, and recommendations.
Work with the multidisciplinary team to progress the UBESS from prototype integration toward a reliable, manufacturable, and certification-ready design.
Requirements and Qualifications
Bachelor's degree in Electrical Engineering, Power Electronics, or a closely related discipline. A master's degree is an asset.
At least three years of professional experience in power electronics engineering.
Demonstrated experience in low-voltage and/or high-voltage electrical system design and integration.
Strong understanding of DC power systems, power conversion topologies, and converter operating principles.
Experience with energy storage system design, integration, testing, or commissioning.
Working knowledge of battery safety considerations and product certification processes.
Familiarity with EV charging systems and relevant standards or communication protocols, such as CCS, CHAdeMO, or OCPP, as applicable to the selected equipment.
Proficiency with circuit simulation tools such as LTspice, PSpice, MATLAB/Simulink, or equivalent.
Ability to read and interpret electrical schematics, component datasheets, and technical standards.
Strong analytical, troubleshooting, and problem-solving skills.
Ability to prepare technical reports, test documentation, and engineering specifications.
Preferred Qualifications
Experience with bidirectional DC-DC converters, bidirectional AC-DC converters, battery inverters, or grid-connected energy storage systems.
Experience with high-voltage battery packs, battery-level power conversion, contactors, pre-charge circuits, and electrical isolation.
Experience with UL/IEC certification processes for battery systems, inverters, or power electronics equipment.
Hands-on laboratory testing experience using oscilloscopes, power analyzers, electronic loads, and high-voltage safety equipment.
Familiarity with thermal management, component derating, cooling design, and enclosure integration for power electronics.
Experience with three-phase AC systems, power quality, grid-interconnection requirements, and backup-power operation.
Experience working in a fast-paced, cross-functional hardware and product development environment.
Why join Foreseeson?
We offer a challenge-rich environment where you can leverage your business development background to make a tangible impact on the bottom line.
At Foreseeson, we value great work ethics and the ability to work well with diverse teams. If you are ready to build and scale an established EMS company through establishing meaningful relationships, we want to hear from you.
What We Offer
When you join our team, you are not just starting a job - you are becoming part of a community. We are committed to supporting your growth, celebrating your achievements, and helping you build a meaningful career.
Competitive pay
Paid time off
Opportunities for skill development and career advancement
A culture that values respect, teamwork, and diversity
Employee events and engagement initiatives
Recognition programs to appreciate your hard work
We are an equal opportunity employer committed to fostering an inclusive, diverse, and respectful workplace, and we welcome applications from all qualified individuals.
We are committed to providing reasonable accommodations throughout the recruitment, selection, and employment process. If you require accommodation at any stage of the hiring process, please contact View email address on ca.hrm.tc so that we can work with you to meet your needs.
Employment Type:
1-year contract, with the potential for extension or conversion to a permanent, full-time position.
Expected Salary:
CA$95,680 per year. The final salary will be determined based on the successful candidate’s qualifications, relevant experience, and overall fit for the role.
*We would like to thank all applicants in advance for your interest in this position. Only candidates selected for an interview will be contacted.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Power Electronics Engineer in Winnipeg, MB vacancy
- ...large staff of Mechanical, Acoustical, Software and Electrical engineers who utilize cutting edge tools and techniques to develop... ...work environment and very interesting products to work on. Power Electronics EngineerWe are seeking a Power Electronics Engineer to join a...SuggestedInternship
- We are seeking a Power Electronics Engineer to join our hardware development team and contribute to the design of next-generation power-conversion products. In this hands-on role, you will work on technologies such as DC-DC converters, AC-DC power supplies, DC-AC inverters...SuggestedWorldwide
- Design power electronics and electromechanical systems onsite in Cambridge, Ontario, using hands-on engineering across controls, hardware, and embedded systems.Smarter Alloys seeks an Electrical Engineer for Extract Energy heat-to-power technology and shape memory alloy products...Suggested
- Join Moment Energy as a Senior Electronics Engineer and lead the charge in advanced battery storage technology. This position emphasizes designing power systems that empower clean energy applications. As a Senior Power Electronics Engineer at Moment Energy, you will play...Suggested
- ...gives everyone ownership over their energy supply by using solar power to charge their EV and power their home, unlocking their EV's... ...opportunityWe are searching for a self-motivated Senior Power Electronics Engineer with a proven track record to design and develop power...SuggestedFlexible hours
$100k - $120k per year
...Group (Socomec) is a global leader in electrical equipment engineering and manufacturing, specialized in low voltage energy performance... .... About This RoleWe are looking for a highly skilled Power Electronics Design Engineer with expertise in simulation, hardware design...- ...software products, alongside our world‑class team of innovators and engineers! Responsibilities Lead the hardware development of 10kW... ...and system level design to ensure high performance of the power electronics systems. Demonstrate expertise in designing with MOSFETS,...Contract work
- ...Energy, we’re building a world where clean power is abundant, affordable, and... ...or scalable enough. We didn’t argue, we engineered the solution. Today, Moment Energy delivers... ...for an experienced and driven Senior Power Electronics Engineer to join our engineering team and...Permanent employmentFull timeLive outWork at office
$125k - $155k per year
...original equipment manufacturers (OEMs) of electric vehicles and industrial equipment. Delta-Q’s unique blend of engineering capability in high-efficiency power electronics and embedded software design delivers innovative battery charging solutions to meet the evolving needs of...Work at officeShift work- Lead power electronics simulation and hardware design for Socomec North America, specializing in high-power conversion systems and testing.As a Power Electronics Design Engineer, you will model and optimize converters, inverters, and power electronic components. The work includes...
- Design energy storage power conversion with Foreseeson Technology Inc. as a Power Electronics Engineer on a one-year contract. Apply converter expertise to high-voltage battery systems.This engineer develops, evaluates, integrates, and validates power conversion architecture...Contract work
- Lead component engineering and product safety for AC-DC and DC-DC power supplies at Toronto Design Centre, working mainly on-site with one weekly flex day.This... ...requires knowledge of analog and digital circuits, power electronics, and global safety standards.Key Responsibilities:...1 day per week
- DRS Pivotal Power Inc. in Nova Scotia seeks an Electrical Engineering Manager to lead a team of hardware designers focused on power electronics for multiple projects. You will report to the Naval Communication Electrical Engineering Manager and oversee estimation, planning,...
- Lead 10kW to 100kW power converter development at Pulsenics, using power electronics design and control expertise. Work spans hardware, simulation, and testing.As a Senior Power Electronics Engineer, you will develop converters, inverters, battery chargers, and variable frequency...Contract workWorldwide
$95k - $140k per year
...services, we're not just building products we're powering communities and making a difference worldwide.Position Title: Senior Power Electronics Control EngineerDepartment: Inverter... ...The Senior Power Electronics Control Engineer, specializes in Hardware-in-the-Loop simulation...InternshipManual laborWorldwide- Apply power electronics and control systems expertise to CPKC’s hydrogen locomotive platform, supporting testing, integration, and operational reliability.This Control Systems Engineer role advances next-generation rail technology through engineering design and hands-on field...
- OverviewTonal is looking for a Senior Power Electronics Firmware Engineer to develop the firmware for our motor drive and power systems. That drive generates up to 250 pounds of digital weight, so its firmware defines how Tonal feels to every member. You’ll contribute at every...InternshipLocal area
- Join Adamson Systems as a skilled Power Electronics Engineer in Port Perry. Play a pivotal role in developing advanced power electronic products, including high-efficiency power supplies and multi-channel systems. The ideal candidate will possess over seven years of dedicated...
- Axiomatic Technologies Corporation is seeking a Power Electronics Engineer to join its hardware development team in Mississauga, Ontario. You will design and prototype DC-DC converters, AC-DC supplies, DC-AC inverters, and motor controllers, contributing across the full product...
- Lead global power electronics engineering at Murata Power Solutions, guiding North American and Asian teams onsite with one weekly flex remote day.Reporting to the CEO, this Vice President leads multidisciplinary teams through complete power conversion product development....Remote work1 day per week
- Daanaa, a Vancouver-based power electronics company, seeks a Hardware Engineering Manager to lead the hardware team from concept to production. You will drive architecture, analog and digital design, and DFM/DFT while building a high-performing group in a fast-growth environment...
- About the Role Our client, a pioneer in advanced power solutions, is seeking a highly skilled Senior Electrical Design Engineer specializing in Power Electronics to join their fully remote engineering team. This critical role involves the design, development, and validation...Remote workFlexible hours
- ...Pioneer Transformers, part of ERMCO Group, in Mississauga, seeks a Mechanical Design Engineer to design, develop and optimize power electronics hardware and related components. You will work under senior engineers, apply growing expertise, and collaborate with cross-functional...Permanent employment
- ...Every day, our team takes pride in rolling up their sleeves to create products that are mindful of the environment. Join us as a Power Engineer 3rd class in Winnipeg and help bring materials to life in a workplace where health and safety always come first. What’s in...Hourly payFull timeMonday to fridayShift work
- Placements24 is seeking a Senior Electrical Design Engineer specializing in Power Electronics to join a fully remote engineering team. You will design, simulate, and validate power conversion systems for diverse applications, collaborating with firmware, mechanical, and product...Remote work
$92.3k - $112.8k per year
A leading cybersecurity company seeks a Hardware Developer focused on power supply design in Burnaby. This role involves designing regulators, optimizing circuits, and collaborating with engineering teams to deliver robust hardware for cybersecurity platforms. Candidates should...- e-STORAGE, part of the Canadian Solar family, seeks a Senior Power Electronics Control Engineer to lead HIL testing for PCS and inverter validation in an onsite role in Ontario. You will own real-time simulations, develop firmware, and ensure grid-code compliance across projects...
- ...Who We Are: Price Electronics ( a division of Price Industries, believes that Excellence matters, and continuous innovation offers benefits... ..., and you’re invited to be a part of that. Manufacturing Engineering Specialist The Manufacturing Engineering Specialist will...Contract workWork at office
$100k - $130k per year
dormakaba is seeking an Electronics Engineer based in Montreal. The role involves leading the design, development, and verification of electronic hardware for next-generation access control products, overseeing PCB development, and collaborating with various teams to ensure...- ...industry of electrical motor control with a next-generation Clean Power variable frequency drive built on wide-bandgap (SiC)... ...running in the field. We are looking for a Principal Power Electronics Architect — the technical authority who owns how our power conversion...Ongoing contractContract workInternshipWork at officeImmediate startWorldwideRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Power Electronics Engineer. Be the first to apply!
Related searches
- power engineer Winnipeg, MB
- 5th class power engineer Winnipeg, MB
- energy engineer Winnipeg, MB
- 3rd class power engineer Winnipeg, MB
- energy efficiency engineer Winnipeg, MB
- ingenieur energie Winnipeg, MB
- class power engineer Winnipeg, MB
- chief power engineer Winnipeg, MB
- power engineer and power systems operator Winnipeg, MB
- power generation engineer Winnipeg, MB

