Program Manager, Manufacturing & Npi
North Vector Dynamics Inc.
Who We AreNorth Vector Dynamics is a Canadian-owned and controlled defence technology company specializing in precision interception, autonomy, and advanced propulsion. NVD is building a full-spectrum missile capability, from counter-UAS solutions to hypersonics, designed to serve and defend NATO member states and their allies and partners.
About the RoleNorth Vector Dynamics is building next-generation defence systems, and the CM70 is moving from prototype builds to a controlled, repeatable production line in a new Calgary manufacturing facility. We’re looking for a Program Manager, Manufacturing & NPI to own the plan that gets our products from released design to delivered hardware, on time, at cost, and ready for rate.
What You’ll DoProgram & Schedule Management
Own the integrated manufacturing schedule for the CM70 and future products: build cycles, material readiness, test and demo articles, kinetic test units, and customer and government deliverables.
Translate customer commitments and engineering milestones into build plans with clear gates, owners, and dates, and keep them current as priorities shift.
Run the risk, issue, and hard-stops registers for manufacturing: surface the gating constraints across method, machine, material, and manpower early, and drive closure plans weekly.
Track program cost: unit build cost, bill-of-materials costing, budget versus actuals for manufacturing projects and capital, and the cost impact of design and supplier changes.
Set and run the manufacturing operating cadence: weekly build reviews, schedule and risk reporting to senior leadership, and clear status on what is on track, at risk, or blocked.
New Product Introduction (NPI)
Build and own a stage-gate NPI process that carries each product from prototype through pilot builds, low-rate initial production, and rate production, with defined entry and exit criteria at every gate.
Lead manufacturing readiness reviews against Manufacturing Readiness Levels (MRL), ensuring tooling, fixtures, work instructions, supply, quality plans, and training are ready before each gate.
Drive design-for-manufacturability (DFM) and design-for-test input into engineering reviews, and coordinate design freezes and baselines so production builds to a controlled configuration.
Coordinate engineering changes from design to the floor: impact assessment on schedule, cost, inventory, tooling, and work instructions, and orderly cut-in through the change control board.
Plan first article inspections and pilot builds with Quality and Manufacturing Engineering, and capture lessons learned into the next product’s NPI plan.
Support the planning for production transfer and expansion with allied partners, including future manufacturing in the EU.
Manufacturing Projects & Systems Deployments
Project-manage the stand-up of our new manufacturing facility: fit-out, equipment moves, commissioning, and the re-validation needed to restart production with minimal downtime.
Lead the project plan for our MES (Eyelit), ERP, and PLM/PDM rollouts with the Head of Manufacturing and IT: scope, vendor coordination, integration milestones, data migration, training, and go-live.
Coordinate the manufacturing workstreams of our AS9100 certification plan with the Quality lead, so compliance milestones are scheduled alongside production rather than competing with it.
Partner with Supply Chain on long-lead and critical parts, rolling purchase orders, second-source qualification, and shortage recovery plans that protect the build schedule.
Own manufacturing capital and equipment projects from business case through installation, including printer, automation, and test equipment decisions.
Stakeholders & Tools
Serve as the single point of coordination between Manufacturing, Systems Engineering, Supply Chain, Quality, Security, and the company-wide Project Manager, and keep everyone working from one plan.
Own our manufacturing planning and tracking tools, today in monday.Com and evolving into the ERP and MES, and build dashboards that make status obvious at a glance.
Prepare program updates and briefing material for senior leadership, customers, and government stakeholders.
Step into whatever the mission demands: this is a startup, no two weeks will look the same!
What You BringRequired
A bachelor’s degree (minimum) in engineering (manufacturing, mechanical, industrial, aerospace, or similar), or an equivalent technical discipline from an accredited program and institution.
5+ years of program or project management in a hardware manufacturing environment, with direct ownership of NPI, production ramps, or production programs from plan to delivery.
A track record building and running integrated schedules with real dependencies across engineering, supply chain, and production, and getting hardware out the door on time.
Experience running stage-gate or phase-gate product development or NPI processes, including readiness reviews and design-freeze discipline.
Working knowledge of engineering change control, bills of materials, and configuration management, and how changes ripple through cost, inventory, and the shop floor.
Strong command of planning tools (MS Project, Smartsheet, monday.Com, or similar) and of data: building and presenting schedule, cost, and risk metrics in Excel, Power BI, or similar tools to make an ambiguous problem clear.
Experience managing budgets and cost tracking for programs or capital projects.
Ability to read engineering drawings and bills of materials, and enough technical depth to challenge a plan with engineers and technicians.
Clear, direct communication with technicians, engineers, executives, suppliers, and customers, and the judgment to escalte early with options, not just problems.
Eligibility for a Government of Canada security clearance and registration under the Controlled Goods Program;
active clearance is a significant asset.
A builder’s mindset: you take ownership of the outcome, not just the schedule, and you’re as comfortable on the floor with a technician as you are in a leadership review.
Preferred
PMP, PgMP, or equivalent program management certification.
Experience in a UAS, aerospace, munitions, or defence manufacturing environment, ideally at a startup or scale-up moving from prototype to rate production.
Familiarity with Manufacturing Readiness Levels (MRL), APQP (AS9145), and AS9100 requirements for production planning, first article inspection, and configuration management.
Experience leading an ERP, MES, or PLM implementation, or a facility stand-up, relocation, or production line transfer.
Exposure to earned value management (EVM) and government or defence contract deliverables, including DND or allied program reporting.
Lean manufacturing or Six Sigma experience (Green Belt or higher), applied to production flow and line balancing.
Exposure to electromechanical assembly, additive manufacturing, PCBA, or energetics production.
P.Eng. or EIT designation, or eligibility for registration in Alberta or conversion from an eligible province.
Why North Vector Dynamics
Real ownership from day one: the systems and processes you help build will be foundational to how this company operates for years to come.
We’re working on technology that matters at a national and global level, and every person on the team feels that weight and that purpose.
A tight-knit, high-calibre team that moves fast, holds each other to a high standard, and doesn’t waste time on bureaucracy for its own sake.
Competitive compensation and meaningful upside from joining an early-stage company at the forefront of the defence technology sector.
On-site in Calgary, AB, a growing hub for tech and defence, with a culture built around resilience and getting things done.
#J-18808-Ljbffr
About the RoleNorth Vector Dynamics is building next-generation defence systems, and the CM70 is moving from prototype builds to a controlled, repeatable production line in a new Calgary manufacturing facility. We’re looking for a Program Manager, Manufacturing & NPI to own the plan that gets our products from released design to delivered hardware, on time, at cost, and ready for rate.
What You’ll DoProgram & Schedule Management
Own the integrated manufacturing schedule for the CM70 and future products: build cycles, material readiness, test and demo articles, kinetic test units, and customer and government deliverables.
Translate customer commitments and engineering milestones into build plans with clear gates, owners, and dates, and keep them current as priorities shift.
Run the risk, issue, and hard-stops registers for manufacturing: surface the gating constraints across method, machine, material, and manpower early, and drive closure plans weekly.
Track program cost: unit build cost, bill-of-materials costing, budget versus actuals for manufacturing projects and capital, and the cost impact of design and supplier changes.
Set and run the manufacturing operating cadence: weekly build reviews, schedule and risk reporting to senior leadership, and clear status on what is on track, at risk, or blocked.
New Product Introduction (NPI)
Build and own a stage-gate NPI process that carries each product from prototype through pilot builds, low-rate initial production, and rate production, with defined entry and exit criteria at every gate.
Lead manufacturing readiness reviews against Manufacturing Readiness Levels (MRL), ensuring tooling, fixtures, work instructions, supply, quality plans, and training are ready before each gate.
Drive design-for-manufacturability (DFM) and design-for-test input into engineering reviews, and coordinate design freezes and baselines so production builds to a controlled configuration.
Coordinate engineering changes from design to the floor: impact assessment on schedule, cost, inventory, tooling, and work instructions, and orderly cut-in through the change control board.
Plan first article inspections and pilot builds with Quality and Manufacturing Engineering, and capture lessons learned into the next product’s NPI plan.
Support the planning for production transfer and expansion with allied partners, including future manufacturing in the EU.
Manufacturing Projects & Systems Deployments
Project-manage the stand-up of our new manufacturing facility: fit-out, equipment moves, commissioning, and the re-validation needed to restart production with minimal downtime.
Lead the project plan for our MES (Eyelit), ERP, and PLM/PDM rollouts with the Head of Manufacturing and IT: scope, vendor coordination, integration milestones, data migration, training, and go-live.
Coordinate the manufacturing workstreams of our AS9100 certification plan with the Quality lead, so compliance milestones are scheduled alongside production rather than competing with it.
Partner with Supply Chain on long-lead and critical parts, rolling purchase orders, second-source qualification, and shortage recovery plans that protect the build schedule.
Own manufacturing capital and equipment projects from business case through installation, including printer, automation, and test equipment decisions.
Stakeholders & Tools
Serve as the single point of coordination between Manufacturing, Systems Engineering, Supply Chain, Quality, Security, and the company-wide Project Manager, and keep everyone working from one plan.
Own our manufacturing planning and tracking tools, today in monday.Com and evolving into the ERP and MES, and build dashboards that make status obvious at a glance.
Prepare program updates and briefing material for senior leadership, customers, and government stakeholders.
Step into whatever the mission demands: this is a startup, no two weeks will look the same!
What You BringRequired
A bachelor’s degree (minimum) in engineering (manufacturing, mechanical, industrial, aerospace, or similar), or an equivalent technical discipline from an accredited program and institution.
5+ years of program or project management in a hardware manufacturing environment, with direct ownership of NPI, production ramps, or production programs from plan to delivery.
A track record building and running integrated schedules with real dependencies across engineering, supply chain, and production, and getting hardware out the door on time.
Experience running stage-gate or phase-gate product development or NPI processes, including readiness reviews and design-freeze discipline.
Working knowledge of engineering change control, bills of materials, and configuration management, and how changes ripple through cost, inventory, and the shop floor.
Strong command of planning tools (MS Project, Smartsheet, monday.Com, or similar) and of data: building and presenting schedule, cost, and risk metrics in Excel, Power BI, or similar tools to make an ambiguous problem clear.
Experience managing budgets and cost tracking for programs or capital projects.
Ability to read engineering drawings and bills of materials, and enough technical depth to challenge a plan with engineers and technicians.
Clear, direct communication with technicians, engineers, executives, suppliers, and customers, and the judgment to escalte early with options, not just problems.
Eligibility for a Government of Canada security clearance and registration under the Controlled Goods Program;
active clearance is a significant asset.
A builder’s mindset: you take ownership of the outcome, not just the schedule, and you’re as comfortable on the floor with a technician as you are in a leadership review.
Preferred
PMP, PgMP, or equivalent program management certification.
Experience in a UAS, aerospace, munitions, or defence manufacturing environment, ideally at a startup or scale-up moving from prototype to rate production.
Familiarity with Manufacturing Readiness Levels (MRL), APQP (AS9145), and AS9100 requirements for production planning, first article inspection, and configuration management.
Experience leading an ERP, MES, or PLM implementation, or a facility stand-up, relocation, or production line transfer.
Exposure to earned value management (EVM) and government or defence contract deliverables, including DND or allied program reporting.
Lean manufacturing or Six Sigma experience (Green Belt or higher), applied to production flow and line balancing.
Exposure to electromechanical assembly, additive manufacturing, PCBA, or energetics production.
P.Eng. or EIT designation, or eligibility for registration in Alberta or conversion from an eligible province.
Why North Vector Dynamics
Real ownership from day one: the systems and processes you help build will be foundational to how this company operates for years to come.
We’re working on technology that matters at a national and global level, and every person on the team feels that weight and that purpose.
A tight-knit, high-calibre team that moves fast, holds each other to a high standard, and doesn’t waste time on bureaucracy for its own sake.
Competitive compensation and meaningful upside from joining an early-stage company at the forefront of the defence technology sector.
On-site in Calgary, AB, a growing hub for tech and defence, with a culture built around resilience and getting things done.
#J-18808-Ljbffr
Vacancy posted 33 minutes ago
Similar jobs that could be interesting for youBased on the Program Manager, Manufacturing & Npi in Winnipeg, MB vacancy
- North Vector Dynamics Inc. in Calgary, AB is seeking a Program Manager, Manufacturing & NPI to own the plan from released design to delivered hardware on time and at cost. You will lead integrated schedules across engineering, supply chain, and production, drive stage-gate NPI...Suggested
- Coordinate hardware NPI programs from design through manufacturing while aligning software releases, QA validation, and production readiness.This Program Manager leads complex hardware programs involving design, manufacturing, BOM management, image readiness, production ramp...Suggested
- DarkVision in Vancouver is seeking a Manufacturing Manager to lead and scale the production of advanced ILI and downhole imaging technologies. You will own end-to-end manufacturing and repair scope, directing a team of technicians and collaborating with Field Ops, Supply Chain...Suggested
- Senex Recruitment Ltd is seeking an experienced Project Manager to own and steer complex new product development projects from development through to manufacture and launch. You will coordinate internal engineering teams and external partners, ensuring schedules, costs and...Suggested
- Current Lighting Employee Co Llc, basé à Montréal, Québec, recherche un gestionnaire de programme pour piloter l’introduction de nouveaux luminaires LED et des contrôles intelligents à l’échelle Nord-Américaine. Vous dirigerez des équipes transversales, assurerez le respect ...Suggested
- ...DART Aerospace, we design, manufacture, and certify mission-critical... ...Senior New Product Introduction (NPI) Engineer to lead the... ...Contribute to certification programs involving TCCA, FAA, EASA,... ...Chain, Procurement, and Program Management. Provide hands-on engineering...Permanent employmentFull time
- GCR Professional Services is seeking a Manufacturing Engineer to own and optimize manufacturing processes for assigned products in the Burlington... ..., and cost while providing technical leadership for NPI programs and automation initiatives. You will collaborate closely with...
- Lead hardware manufacturing readiness at Tenstorrent in a hybrid Toronto role, using NPI, failure analysis, and process engineering expertise.As a Staff Manufacturing Engineer, you will build in-house capabilities for prototype, EVT, DVT, and volume production. You will translate...Contract work
- ...assembly process engineering and Lean expertise across manufacturing operations.This Manufacturing Process Engineer leads NPI launches and continuous improvement for existing... ...assembly preferredComplex product structure management experience in SAP and MESIPC-A-610/620 standards...
- ...scaling electric vehicle tech company in Montreal, seeks a Vehicle Program Manager to steer new vehicle development from concept to SOP,... ...teams across engineering, tooling, supplier, certification, manufacturing and commercial milestones. You will own the New Product Introduction...
- Take on the role of Manufacturing Program Manager at BRP, where you'll lead project initiatives and ensure successful deliverables that meet business goals. Your leadership will enhance program excellence and team efficiency. As a key player at BRP, you will leverage your...
- Strengthen manufacturing operations through safety management systems, audit readiness, and practical floor guidance at VoltaGrid Manufacturing in Calgary.This Health and Safety Manager leads the facility program while maintaining a visible presence across manufacturing operations...
- Kaseya is seeking a Senior Staff Program Manager to lead a portfolio of cross-functional initiatives spanning New Product Introduction, process transformation, and go-to-market rollouts. You will independently scope ambiguous initiatives and manage a broad executive stakeholder...
- ...WhiteWater West in Richmond, BC, is seeking an experienced Manufacturing Engineer to provide technical manufacturing support across our global supply base. You will ensure safe, consistent production aligned with design and quality requirements across composites, steel, theming...
$80k - $95k per year
We are seeking a Program Manager to lead automotive tooling and manufacturing programs from launch through production. This role manages cross-functional automotive projects including tooling, engineering coordination, supplier management, and customer delivery. Salary:...- ...Technologies is seeking a Sr. Associate, Manufacturing Engineering, Systems - Projects (L2) in Waterdown... ..., and process validation. You will lead NPI and sustaining activities, collaborate... ...automation design. Strong Lean, project management, and cross-functional collaboration are...
- Shape aerospace manufacturing capabilities through project governance, cell design, and plant layout development. Apply technical knowledge to coordinated industrialization programs and business cases.The Project Manager, Industrialization coordinates projects connected to company...
$75k - $110k per year
Salary Range: $75,000.00 To $110,000.00 AnnuallyPosition summary The Manufacturing Engineer / Program Manager owns each job from quote handoff to shipment, working with CNC programming, tooling, customers and the shop floor to launch complex, low-volume parts successfully...Work at officeMonday to friday- ...MANUFACTURING ENGINEERING MANAGER Winnipeg, MB Full-Time and Onsite Carfair Composites is a leader in fibre-reinforced plastic design and... ..., AL, Wausaukee, WI, and Gillett, WI. As a comprehensive manufacturer of engineered composite products, Carfair Composites supplies...Long term contractFull timeInternshipWork at officeImmediate startMonday to friday
- ...Burloak Technologies is seeking a Manufacturing Engineering Specialist II to support machining, assembly and deburring operations, translating engineering requirements into practical manufacturing solutions. You will develop fixtures, CAD models and process documentation to...
- ...SUMMARY We are seeking a Customer Programs Manager who will act as the liaison for the... ...with 5+ years of work experience in a manufacturing or customer-oriented environment.... ...Group is a leading independent global bus manufacturer providing a comprehensive suite of mass...Long term contractFull timeContract workSummer holiday
- ...Malach Metal & Machining in Canada seeks a Manufacturing Engineer to translate customer requirements into efficient, reproducible manufacturing processes. You will design tooling and fixtures, support new product introductions, and work closely with Engineering, Production...
- ...The New Era Group in North York, Ontario seeks a Manufacturing Engineer / Program Manager to own each job from quote handoff to shipment. You will work with CNC programming, tooling, customers and the shop floor to launch complex, low-volume parts on time and at or below quoted...Part time
- Senior Program Manager: Manufacturing Transformation (PLM/MES) Montreal, QCLe candidat doit posséder les qualifications suivantes pour être retenu dans le cadre d’un processus interne :The candidate must have the following qualifications to be retained for an internal process...
- Cerebras Systems is seeking a Staff Technical Program Manager to lead Data Center New Product Introduction (NPI), connecting hardware and systems engineering with facility design, supply chain, networking, and operations to deploy at scale. You will own the integrated readiness...
- ...Lead avionics project portfolios as an Engineering Program Management Analyst in Dorval, with flexible and hybrid work policies when applicable. Use analytical planning and leadership skills. Bombardier’s Avionics Program Management team seeks a results-driven analyst for...Flexible hours
- ...City plans, designs, operates and renews the mobility network.Reporting to the Director, Safe Mobility, the General Supervisor, Program Management leads two critical section-wide functions: Program Management and Planning & Monitoring. Together, these teams form a vital link...Permanent employmentSeasonal work
- ...Limited, North America’s leading manufacturer and distributor of air... ...counselling, consultations, and guided programs all in one place. Life and... ...operators, supervisors, managers, and design engineers •... ...improvements • Coordinate and manage manufacturing support...Work at office
$52.5k per year
...commercial, and infrastructure projects across the country. About the Program If you’re a new grad who wants more than a desk job — someone... ...your chance to build a real career from the ground up. Our Management Development Program is a hands-on, accelerated path that teaches...Full timeTraineeshipWork at officeRelocationRelocation package- ...Industries Limited, North America’s leading manufacturer and distributor of air distribution... ...book counselling, consultations, and guided programs all in one place. Life and Disability... ...finishing requirements. • Coordinate and manage manufacturing support projects, ensuring...For contractorsWork at officeRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Program Manager, Manufacturing & Npi. Be the first to apply!
Related searches
- mental health program manager Winnipeg, MB
- educational program director Winnipeg, MB
- directeur de projet Winnipeg, MB
- non profit program coordinator Winnipeg, MB
- technical program manager Winnipeg, MB
- program supervisor Winnipeg, MB
- recreation program coordinator Winnipeg, MB
- chargé de projets électriques Winnipeg, MB
- chargé de projet environnement Winnipeg, MB
- coordonnateur de projet Winnipeg, MB

