Reliability Engineering
Natus Sensory Inc.
About the OpportunityLocation: Hybrid: Oakville, Canada
At Natus Medical, product reliability is essential to delivering medical technology that healthcare professionals can depend on.
We are seeking an experienced
Reliability Engineer
to lead product reliability activities and help ensure our neurology medical devices and applications consistently deliver their intended performance throughout their expected service life.
This is a highly collaborative, technically influential role spanning mechanical, electrical, firmware, software, and integrated systems. You'll partner closely with Engineering, Verification Test, Quality, Service, and Manufacturing teams to transform product requirements, potential failure modes, and real-world field feedback into measurable reliability objectives, effective testing strategies, and long-term product service-life strategies.
From early prototype development through formal Reliability Verification, Design Transfer, and commercialization, you'll take ownership of the methodologies, planning, analysis, and technical evidence that support product reliability.
If you're passionate about solving complex engineering challenges, improving product performance, and building reliability into every stage of product development, this is an opportunity to make a meaningful impact.
What You'll DoLead Reliability Strategy & Cross-Functional Collaboration
Lead cross-functional product reliability planning across Hardware, Firmware, Software, Systems Engineering, Quality, Manufacturing, and Service teams.
Translate expected use cases and corner cases, product requirements, Design Failure Mode and Effects Analysis (dFMEA), expected product service life, and historical data (lessons learned, manufacturing, service, and field complaints) into measurable reliability objectives for New Product Introductions (NPI).
Develop and maintain product reliability test strategies, equipment requirements, acceptance criteria, and sample sizes aligned with prototype build plans, supported by corresponding statistical confidence and reliability targets.
Develop Advanced Reliability Testing & Validation Methods
Lead the development of standardized and automated reliability test methods and systems to evaluate hardware durability (environmental, mechanical, and electrical stresses), signal quality and data integrity, interface reliability, long-duration and endurance performance, fault injection and recovery, and system-level robustness across hardware, firmware, software applications, and cloud infrastructure.
Develop and apply appropriate accelerated testing models for electro-mechanical systems and strategies to demonstrate expected product service life.
Turn Reliability Insights Into Product Improvements
Support failure analysis and root-cause investigations, ensuring findings are translated into DfX process improvements across requirements, procurement, design, testing, or manufacturing.
Partner with Service teams to develop and maintain product Service Plans based on reliability outcomes, including expected failure modes, maintenance and inspection requirements, service intervals, repair/replacement strategies, and service-life considerations.
Lead formal, program-level Reliability and Service Technical Reviews.
Shape Reliability Excellence Across the Organization
Provide technical leadership in developing and advancing organization-wide reliability programs, establishing standardized methodologies, processes, and best practices while driving cross-functional adoption throughout the product lifecycle.
What You'll BringRequired QualificationsEducation & Professional Experience
Bachelor’s degree in Mechatronics Engineering, Reliability Engineering, Electrical Engineering, Computer Science, Systems Engineering, or a related engineering discipline.
7+ years of experience in product reliability engineering
for complex, multidisciplinary products incorporating hardware, firmware, software, and system-level interfaces in industries such as medical devices, automotive, aerospace, or consumer electronics.
Reliability Engineering Expertise
Strong knowledge and practical application of reliability standards, including IEC 62308 and IEC 61078, and reliability engineering principles and methodologies, including:
Bathtub curve, failure-rate characteristics and metrics (FIT, operating hours, MTTF, and MTBF).
Probability distributions and reliability functions.
Weibull analysis and life-data analysis.
Reliability block diagrams and reliability allocation.
Reliability prediction and expected service-life estimation.
Confidence and reliability (C/R) intervals determination.
Experience selecting and applying accelerated testing models, such as Arrhenius, Eyring, Coffin-Manson, inverse power law, or other physics-of-failure models appropriate to the identified failure mechanisms.
Strong multidisciplinary engineering background with the ability to understand, challenge, and guide reliability engineering and test activities.
Demonstrated experience developing and executing product Reliability Plans and risk-based reliability strategies throughout the product development lifecycle.
Testing, Automation & Technical Investigation
Experience defining and leading long-duration, stress, endurance, environmental, fault-injection, robustness, and system-level reliability testing.
Hands-on experience using hardware laboratory instruments, including function generators, oscilloscopes, logic analyzers, data acquisition systems, and spectrum/signal analyzers.
Experience developing automated test systems, including test scripts for embedded firmware and software applications, to support stress testing, long-duration testing, corner-case evaluation, and failure recovery.
Demonstrated experience leading failure analysis and root-cause investigations involving multidisciplinary and intermittent product failures.
Technical Leadership & Problem-Solving
Ability to interpret complex technical and statistical results and translate them into engineering decisions, risk assessments, and actionable recommendations.
Strong hands-on technical capabilities and demonstrated ability to lead cross-functional technical investigations and influence Design for Reliability (DfR) engineering decisions and service strategies without direct authority.
What Will Set You ApartPreferred Qualifications
Experience applying advanced firmware/software reliability methods, including automated regression testing, resource and stress testing, fault injection, error handling and recovery, and hardware/firmware/software (HW/FW/SW) integration testing. Familiarity with development and test management tools such as Jama, Jira, Git, and GitHub.
Experience testing the reliability and resilience of software applications (e.G., Android) or cloud infrastructure (e.G., Microsoft Azure), including network interruption, service restart and recovery, data synchronization, storage/database failures, backup and rollback, or similar resilience testing.
Make an Impact With Natus MedicalThis is an opportunity to bring your technical expertise, problem-solving skills, and leadership to complex medical technology that needs to perform reliably throughout its service life.
You'll have the opportunity to influence product design, strengthen testing methodologies, collaborate with multidisciplinary engineering teams, and help establish reliability practices that support both current and future products.
#J-18808-Ljbffr
At Natus Medical, product reliability is essential to delivering medical technology that healthcare professionals can depend on.
We are seeking an experienced
Reliability Engineer
to lead product reliability activities and help ensure our neurology medical devices and applications consistently deliver their intended performance throughout their expected service life.
This is a highly collaborative, technically influential role spanning mechanical, electrical, firmware, software, and integrated systems. You'll partner closely with Engineering, Verification Test, Quality, Service, and Manufacturing teams to transform product requirements, potential failure modes, and real-world field feedback into measurable reliability objectives, effective testing strategies, and long-term product service-life strategies.
From early prototype development through formal Reliability Verification, Design Transfer, and commercialization, you'll take ownership of the methodologies, planning, analysis, and technical evidence that support product reliability.
If you're passionate about solving complex engineering challenges, improving product performance, and building reliability into every stage of product development, this is an opportunity to make a meaningful impact.
What You'll DoLead Reliability Strategy & Cross-Functional Collaboration
Lead cross-functional product reliability planning across Hardware, Firmware, Software, Systems Engineering, Quality, Manufacturing, and Service teams.
Translate expected use cases and corner cases, product requirements, Design Failure Mode and Effects Analysis (dFMEA), expected product service life, and historical data (lessons learned, manufacturing, service, and field complaints) into measurable reliability objectives for New Product Introductions (NPI).
Develop and maintain product reliability test strategies, equipment requirements, acceptance criteria, and sample sizes aligned with prototype build plans, supported by corresponding statistical confidence and reliability targets.
Develop Advanced Reliability Testing & Validation Methods
Lead the development of standardized and automated reliability test methods and systems to evaluate hardware durability (environmental, mechanical, and electrical stresses), signal quality and data integrity, interface reliability, long-duration and endurance performance, fault injection and recovery, and system-level robustness across hardware, firmware, software applications, and cloud infrastructure.
Develop and apply appropriate accelerated testing models for electro-mechanical systems and strategies to demonstrate expected product service life.
Turn Reliability Insights Into Product Improvements
Support failure analysis and root-cause investigations, ensuring findings are translated into DfX process improvements across requirements, procurement, design, testing, or manufacturing.
Partner with Service teams to develop and maintain product Service Plans based on reliability outcomes, including expected failure modes, maintenance and inspection requirements, service intervals, repair/replacement strategies, and service-life considerations.
Lead formal, program-level Reliability and Service Technical Reviews.
Shape Reliability Excellence Across the Organization
Provide technical leadership in developing and advancing organization-wide reliability programs, establishing standardized methodologies, processes, and best practices while driving cross-functional adoption throughout the product lifecycle.
What You'll BringRequired QualificationsEducation & Professional Experience
Bachelor’s degree in Mechatronics Engineering, Reliability Engineering, Electrical Engineering, Computer Science, Systems Engineering, or a related engineering discipline.
7+ years of experience in product reliability engineering
for complex, multidisciplinary products incorporating hardware, firmware, software, and system-level interfaces in industries such as medical devices, automotive, aerospace, or consumer electronics.
Reliability Engineering Expertise
Strong knowledge and practical application of reliability standards, including IEC 62308 and IEC 61078, and reliability engineering principles and methodologies, including:
Bathtub curve, failure-rate characteristics and metrics (FIT, operating hours, MTTF, and MTBF).
Probability distributions and reliability functions.
Weibull analysis and life-data analysis.
Reliability block diagrams and reliability allocation.
Reliability prediction and expected service-life estimation.
Confidence and reliability (C/R) intervals determination.
Experience selecting and applying accelerated testing models, such as Arrhenius, Eyring, Coffin-Manson, inverse power law, or other physics-of-failure models appropriate to the identified failure mechanisms.
Strong multidisciplinary engineering background with the ability to understand, challenge, and guide reliability engineering and test activities.
Demonstrated experience developing and executing product Reliability Plans and risk-based reliability strategies throughout the product development lifecycle.
Testing, Automation & Technical Investigation
Experience defining and leading long-duration, stress, endurance, environmental, fault-injection, robustness, and system-level reliability testing.
Hands-on experience using hardware laboratory instruments, including function generators, oscilloscopes, logic analyzers, data acquisition systems, and spectrum/signal analyzers.
Experience developing automated test systems, including test scripts for embedded firmware and software applications, to support stress testing, long-duration testing, corner-case evaluation, and failure recovery.
Demonstrated experience leading failure analysis and root-cause investigations involving multidisciplinary and intermittent product failures.
Technical Leadership & Problem-Solving
Ability to interpret complex technical and statistical results and translate them into engineering decisions, risk assessments, and actionable recommendations.
Strong hands-on technical capabilities and demonstrated ability to lead cross-functional technical investigations and influence Design for Reliability (DfR) engineering decisions and service strategies without direct authority.
What Will Set You ApartPreferred Qualifications
Experience applying advanced firmware/software reliability methods, including automated regression testing, resource and stress testing, fault injection, error handling and recovery, and hardware/firmware/software (HW/FW/SW) integration testing. Familiarity with development and test management tools such as Jama, Jira, Git, and GitHub.
Experience testing the reliability and resilience of software applications (e.G., Android) or cloud infrastructure (e.G., Microsoft Azure), including network interruption, service restart and recovery, data synchronization, storage/database failures, backup and rollback, or similar resilience testing.
Make an Impact With Natus MedicalThis is an opportunity to bring your technical expertise, problem-solving skills, and leadership to complex medical technology that needs to perform reliably throughout its service life.
You'll have the opportunity to influence product design, strengthen testing methodologies, collaborate with multidisciplinary engineering teams, and help establish reliability practices that support both current and future products.
#J-18808-Ljbffr
Vacancy posted 37 minutes ago
Similar jobs that could be interesting for youBased on the Reliability Engineering in Winnipeg, MB vacancy
$95k per year
...recruitment process. YOUR NEXT CHALLENGE:Reporting to the Planning & Reliability Supervisor you will be part of the Mobile Maintenance... ...maintenance, and upgrade of mobile equipment; Ensure that engineering work is completed and adequately reviewed by the relevant stakeholders...SuggestedRemplacementFull timeFor contractorsSummer workWork at officeLocal areaShift work- ...this success, and we have built this company by hiring people who hold these values. People like you!We are seeking a dedicated Reliability Engineer to focus on long-term monthly and quarterly issues. This role involves analyzing historical data from the CMMS and Production...SuggestedLong term contractWorldwide
$130k - $150k per year
...help providers more easily make sense of the body’s signals. Engineered with input from those who have lived the care experience, our... ...OpportunityLocation: Hybrid: Oakville, Canada At Natus Medical, product reliability is essential to delivering medical technology that healthcare...SuggestedRemplacementLong term contractInternship- ...-Class services, including ESG, Security Consulting, Workplace Strategy, and Workplace Experience.About the Role: As a CBRE Reliability Engineer, you will monitor, analyze, and resolve system and infrastructure problems of mission-critical operational systems.This job is...SuggestedRemplacementLocal area
$83.5k - $104k per year
...effective, affordable treatments that promote better health and well-being. Reaching People. Touching Lives Job PurposeThe Reliability Engineer plays a critical leadership role in advancing asset reliability, equipment performance, and maintenance excellence across...SuggestedRemplacementInternshipWork at officeWeekend work- ...for an accommodation or an alternative application process. Reliability EngineerMONTREAL R & M 1ST SHIFT Full Time Tucker, Tucker, GA,... ...Qualifications (Education/Experience) Bachelor’s degree in Engineering, Mechanical or Electrical Engineering preferred 5+ years of...RemplacementFull timeContract workFor contractorsDay shift
- ...the global marketplace. Our team of passionate and innovative engineers, designers, and product managers architect tools that empower businesses... ...What you will Bring 3 to 5 years of software engineering or reliability engineering experience using Python in a web or API context (we...Permanent employmentWorldwide
- ...maximizing the operational performance, reliability, and availability of production equipment... ...and supports operations, maintenance, engineering, and production teams in troubleshooting... ...logic.Ensure automation systems remain reliable, secure, and maintainable.Continuous ImprovementLead...Permanent employment
$108k - $120k per year
...complexity, skills, experience, and internal equity.Initial Posting Close Date – November 20, 2026About This Opportunity The Reliability & Process Engineer is the plant technical owner for asset health, chronic-loss elimination and sustained line performance. Working closely...Permanent employmentLocal areaShift work$82.95k - $135.3k per year
...Durham, NC ; Boston, MA ; Merrimack, MA.About The Job You're ConsideringWe are seeking a highly motivated Site Reliability Engineer to help build and operate reliable, scalable, and secure services across our platform. This role is designed for someone who combines strong...Full timeLocal area- Job Title: Site Reliability Engineer – Azure / DatabricksLocation: Toronto, ON (Hybrid – 4 days onsite per week)Contract: 1 Year (Extension and Conversion Possible)Job Overview: Looking for a Site Reliability Engineer to join Corporate Technology team and support...Contract work
- ...all stages of growth. Our services include Budget Development, Reliability Support, Planning & Scheduling, Project Management, and more. We... ...Description This contract role is for a Mill - Reliability Engineer based on-site in Kamloops, BC. The primary responsibilities include...Contract workInternship
- ...innovative, high-quality IT solutions is looking for a Database Reliability Engineer.They are looking for a motivated Database Reliability... ...business stakeholders to understand requirements and deliver reliable database services.Qualifications 5+ years of experience in...Long term contract
- Strengthen manufacturing reliability through maintenance strategy, failure analysis, and asset-health planning at Coke Canada Bottling’s Weston Manufacturing Facility.This Reliability and Process Engineer serves as the plant technical owner for equipment health and sustained...
- Site Reliability Engineer (SRE) - Java, Spring Boot, REST APIs & Automation Key Responsibilities Automation and Reducing Toil: SREs write... ...to design resilient architectures and make applications more reliable by design. Required Skills Primary Qualifications Demonstrated...
$122k - $150k per year
...environment, where speaking up and driving positive change are not just encouraged but expected. Reporting to the Lead, Mill Reliability, the Senior Engineer is responsible for leading reliability improvement and asset health strategies primarily for HVC’s Grinding Circuit,...RemplacementFor contractorsWork at office- The SRE will focus on ensuring reliable, resilient systems through task automation, observability, incident response, and problem elimination, while also participating in production-side operations and on-call rotations. KEY RESPONSIBILITIES Deliver improvements to maximize...
- ...would never be safe enough or scalable enough. We didn’t argue, we engineered the solution. Today, Moment Energy delivers 5x the energy... ...the moment. Join us.The OpportunityWe are seeking a Senior Reliability Engineer to help ensure the long-term reliability, durability...Long term contractImmediate start
- ...APIs, and microservices while applying Java or Python, observability, and automation skills.This Chaos Engineering and SRE/DevOps role focuses on validating reliability across distributed environments. You will use AWS FIS, AWS CDK, cloud platforms, and cloud-native tools....
$78.83k - $97.02k per year
Career Opportunities: Student, Reliability Engineering (42541) At Cameco we understand the value of a diverse workforce and we embrace, encourage... ...world rely on our nuclear fuel products to generate safe, reliable, emissions-free nuclear power. Cameco's corporate office is...Full timeTemporary workWork at officeRemote work- Department: Customer Experience / Engineering Travel Requirement: Significant (Greater than 50%) Customer Facing: Yes About UserfulUserful... ...is seeking a highly skilled and customer-oriented Site Reliability Engineer to join our team. In this role, you will be the...
$180k - $240k per year
...Develocity encodes a decade of build and test expertise into a context engineering layer: the ground truth AI agents need to change code safely,... ...to help shape how we operate. You'll be responsible for the reliability, performance, and availability of Develocity instances serving...Remote workWork from homeShift work$120k - $140k per year
...opportunity for an existing vacancy as a Manager of Reliability. This role is responsible for leading plant reliability engineering, preventative maintenance, and associated capital project activities to ensure reliable manufacturing operations.Daily responsibilities may include...For contractors- ...position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a Site Reliability Engineer based in Canada. As a Site Reliability Engineer, you will play a key role in maintaining, scaling, and continuously...Remote workWorldwideFlexible hoursShift workWeekday work
$125k - $250k per year
...Application Infrastructure (Al) department is seeking a Site Reliability Engineer (SRE) to help drive the reliabilityengineering, operations and... ...other SREs.This means teaming up with colleagues to deliver reliable, resilient systems without wasteful operational effort.SRE practices...$100k - $120k per year
...in 1968, TCS has upheld the highest standards of innovation, engineering excellence and customer service. It has set an aspiration to... ...today. Required skill set"Skills and Responsibilities"Site Reliability Engineer (SRE)Role Summary: Seeking a Site Reliability Engineer...Long term contractPermanent employmentWorldwide- ...Information technologyLocation(s): MontrealA career as a Site Reliability Developer in the IT Delivery, Wealth Management team at National... ...Hold a bachelor’s degree in information technology, engineering, or a related field combined with relevant experience, or an equivalent...Long term contractFlexible hours
- ...Hands-on experience with OpenTelemetry (SDKs, collectors, exporters) and distributed tracing6+ years in SRE, platform reliability or observability engineering, with strong hands-on AWS experienceExperience defining and running SLOs, error budgets and alerting...
$90k - $110k per year
...including the TCS Toronto Waterfront Marathon, reflecting its commitment to health, sustainability, and community empowerment. Site Reliability Engineer (SRE) Key Responsibilities Own end-to-end monitoring of CDN and edge configurations, DNS, certificates, cache health,...Long term contract- ...new category: the most advanced and engaging social gaming platform in the world. Role OverviewWe’re seeking a Senior Site Reliability Engineer to join Production Engineering, the team that help advance our infrastructure, security, reliability, and platform maturity....Internship
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Reliability Engineering. Be the first to apply!

