Maintenance Mechanic/Relief Engineer
AB Mauri NA
Maintenance Mechanic/Relief Engineer# Maintenance Mechanic/Relief EngineerCalgary - Calgary, AB T2G 3M3## OverviewPosition TypeFull TimeJob ShiftAny Shift## DescriptionPOSITION OBJECTIVE:
Repair and maintain machinery and mechanical equipment such as pumps, motors, pneumatic tools, conveyors systems, and production machines and equipment. Relieves in the boiler room in the absence of a power engineer.
KEY RESULT AREAS: PERFORMANCE STANDARDS: CORE VALES Continuously exhibit and set the example for others in display of Company values: Customer Centric, Ambitious, Proactive, Innovative, Collaborative and Accountable.
Maintenance
Relief for boiler room during illness vacation or other short falls.
Maintain packaging equipment.
Observe mechanical devices in operation and troubleshoot packaging equipment failures.
Dismantle devices to gain access to and remove defective parts.
Inspect used parts to determine change in dimensional requirements.
Adjust functional parts of devices and control instruments.
Repair or replace defective parts. Install special functional and structural parts in devices. Lubricate and clean parts.
Start devices to test their performance.
Set up and operate drill press, grinder, mill and other metalworking tools to make and repair parts.
Request parts (stock and equipment) for purchase and implementation.
Receives work orders from Maintenance Supervisor or Chief Engineer and performs duties as assigned.
Relieve mechanic for vacation relief.
Maintenance and repairs to key equipment.
Human Resources
Comply with corporate HR policies and procedures.
Comply with Union Contract policy and procedures.
Comply with relevant employment laws.
Comply with all company policies and procedures.
Other:
Other duties as assigned.
Comply with GMP and SQF standards.
Perform HACCP CCP monitoring checks for cream shipments (relief engineer) as per HACCP plan.
Regularly communicate with other employees.## QualificationsA COMBINATION OF THE LISTED SKILLS AND KNOWLEDGE IS PREFERRED
High school diploma or general education degree (GED).
One to three months related experience and/or training, or equivalent combination of education and experience.
Journeyman millwright ticket.
Fourth class steam ticket is a must.
H2S, confined space entry, WHIMIS, GMP, fork truck certification, HACCP, SQF, TDG, safe work permits and safety training.
First Class Steam license.
Experience in food processing.
OTHER FACTORS
Ability to work rotating shifts.
Occasional overtime may be required.WORKING CONDITIONS
While performing the duties of this job, the employee is regularly required to walk, talk, and listen at the same time within a noisy manufacturing environment.
The employee is regularly required to stand or sit for long periods of time, climb stairs, use a ladder, balance;
and stoop, kneel, crouch, or crawl
Employee may use hands or fingers to handle or feel objects, use tools, or manipulate equipment controls;
reach with hands and arms.
While performing the duties of this job, the employee frequently works with moving mechanical parts;
work in high places;
in outside weather conditions;
and with hazardous chemicals and vibration.
The employee is occasionally exposed to wet and /or humid conditions, fumes or airborne particles, extreme cold, and extreme heat. The ability to perform in a noisy, humid, hot, cold and high-volume machine production environment.
The employee may frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close, distance, color, and peripheral vision. Visual depth perception and the ability to adjust focus is required.#J-18808-Ljbffr
Repair and maintain machinery and mechanical equipment such as pumps, motors, pneumatic tools, conveyors systems, and production machines and equipment. Relieves in the boiler room in the absence of a power engineer.
KEY RESULT AREAS: PERFORMANCE STANDARDS: CORE VALES Continuously exhibit and set the example for others in display of Company values: Customer Centric, Ambitious, Proactive, Innovative, Collaborative and Accountable.
Maintenance
Relief for boiler room during illness vacation or other short falls.
Maintain packaging equipment.
Observe mechanical devices in operation and troubleshoot packaging equipment failures.
Dismantle devices to gain access to and remove defective parts.
Inspect used parts to determine change in dimensional requirements.
Adjust functional parts of devices and control instruments.
Repair or replace defective parts. Install special functional and structural parts in devices. Lubricate and clean parts.
Start devices to test their performance.
Set up and operate drill press, grinder, mill and other metalworking tools to make and repair parts.
Request parts (stock and equipment) for purchase and implementation.
Receives work orders from Maintenance Supervisor or Chief Engineer and performs duties as assigned.
Relieve mechanic for vacation relief.
Maintenance and repairs to key equipment.
Human Resources
Comply with corporate HR policies and procedures.
Comply with Union Contract policy and procedures.
Comply with relevant employment laws.
Comply with all company policies and procedures.
Other:
Other duties as assigned.
Comply with GMP and SQF standards.
Perform HACCP CCP monitoring checks for cream shipments (relief engineer) as per HACCP plan.
Regularly communicate with other employees.## QualificationsA COMBINATION OF THE LISTED SKILLS AND KNOWLEDGE IS PREFERRED
High school diploma or general education degree (GED).
One to three months related experience and/or training, or equivalent combination of education and experience.
Journeyman millwright ticket.
Fourth class steam ticket is a must.
H2S, confined space entry, WHIMIS, GMP, fork truck certification, HACCP, SQF, TDG, safe work permits and safety training.
First Class Steam license.
Experience in food processing.
OTHER FACTORS
Ability to work rotating shifts.
Occasional overtime may be required.WORKING CONDITIONS
While performing the duties of this job, the employee is regularly required to walk, talk, and listen at the same time within a noisy manufacturing environment.
The employee is regularly required to stand or sit for long periods of time, climb stairs, use a ladder, balance;
and stoop, kneel, crouch, or crawl
Employee may use hands or fingers to handle or feel objects, use tools, or manipulate equipment controls;
reach with hands and arms.
While performing the duties of this job, the employee frequently works with moving mechanical parts;
work in high places;
in outside weather conditions;
and with hazardous chemicals and vibration.
The employee is occasionally exposed to wet and /or humid conditions, fumes or airborne particles, extreme cold, and extreme heat. The ability to perform in a noisy, humid, hot, cold and high-volume machine production environment.
The employee may frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close, distance, color, and peripheral vision. Visual depth perception and the ability to adjust focus is required.#J-18808-Ljbffr
Vacancy posted 2 hours ago
Similar jobs that could be interesting for youBased on the Maintenance Mechanic/Relief Engineer in Winnipeg, MB vacancy
$39.44 per hour
Overview Languages English Education ~ Other trades certificate or diploma Experience 1 year to less than 2 years On site Work must be completed at the physical location. There is no option to work remotely. Work site environment Outdoors...SuggestedPermanent employmentFull timeRemote work- Education: Other trades certificate or diploma. Work site environment: Outdoors. Noisy. Dusty. Hot. Tasks: Prepare production and other reports. Recommend measures to improve productivity . Resolve work problems, provide technical advice and recommend measures to improve productivity...SuggestedHourly payPermanent employmentImmediate startFlexible hoursDay shiftAfternoon shift
$114.8k - $157.85k per year
...Job Description Senior Mechanical Engineer Are you looking for a company that works on major engineering projects all over the world? Do... ...experience should include training centers, vehicle and fleet maintenance, research laboratories, operational headquarters, personnel...SuggestedFull timeWork at officeWorldwideFlexible hours$39.25 per hour
...extent of repair required Order parts and maintain inventory Adjust equipment and repair or replace defective parts Keep maintenance reports and documentation Test repaired equipment for proper performance and to ensure that work meets manufacturers' specifications...SuggestedPermanent employmentFull timeRemote work- ...AtkinsRéalis. AtkinsRéalis is dedicated in engineering a better future for our planet and its... ...of the program as it relates to mechanical systems design and construction including... ...all proposed renovations, alterations, maintenance work and new construction. Providing...SuggestedFor contractorsInternshipWork at officeFlexible hours
$38 - $42 per hour
...First Student is now hiring a Truck & Transport (Red Seal) Mechanic – Fleet Maintenance Location: Winnipeg, MB Full-Time, Permanent Join the... ...: Brakes, suspensions, steering, and driveline Engine performance and tune-ups Transmissions and clutches Electrical...Hourly payPermanent employmentFull timeShift work- ..., commercial and industrial construction marketplace is looking for a Small Engine and Equipment Mechanic to work from our Winnipeg location. A Day In The Life Performing scheduled maintenance service, such as oil changes, lubrications and tune ups Adjust, repair or...Full timeFor contractors
- ...GFL Environmental is looking for a Maintenance Mechani c to join our team in Winnipeg, MB! This is a 2:30-11:00pm shift. The Maintenance Mechanic is responsible for the day-to-day preventive maintenance, breakdown repairs, daily equipment cleaning tasks and building...Hourly payLong term contractShift work
- ...As our Intermediate Mechanical Engineer , you'll turn ideas into practical, production-ready designs. You'll take a hands-on role in designing and developing mechanical products, building and evaluating prototypes, and supporting testing from concept through production....Long term contract
- ...division of Pattison Food Group Ltd., Save-On-Foods is B.C.’s Most Loved Brand and certified a Great Place to Work®. We are hiring for a Relief Pharmacist to support our stores in Winnipeg, MB . You will be responsible for: Managing day-to-day pharmacy operations...Flexible hoursAfternoon shift
- ...Winnipeg Employer: Winnipeg Regional Health Authority Site: Deer Lodge Centre - 2109 Portage Ave Department / Unit: Resource & Relief Team Job Stream: Clinical Union: MNU Anticipated Start Date: ASAP FTE: 0.50 Anticipated Shift: Days;Non-Conforming;Non-...Immediate startShift work
- ...Aerospace Engine Mechanic Training Program (GTRO) Winnipeg, Manitoba Build an Aviation Career You’re Proud Of At StandardAero, we use... ..., and technical skills required to support turbine engine maintenance and repair operations. Upon successful completion of the program...Long term contractTemporary workTraineeshipSecond job
- ...Description The Opportunity: The Maintenance Supervisor reports directly to... ...condition of the equipment Liaise with Engineering and Operations on matters relating to equipment... ...are a College graduate from an electro-mechanical program or a licensed tradesperson with...For contractorsFlexible hoursShift workNight shift
$68.81k - $114.71k per year
...Maintain, adjust, modify, test, diagnose, and repair an aircraft’s mechanical or structural systems. Work with specialized aviation and... ..., computers, and diagnostic equipment Conduct scheduled maintenance tasks. Mentor AME apprentices Keep timely and accurate records...ApprenticeshipInternshipShift workDay shift- ...As our Junior Mechanical Engineer , you'll build your engineering career by working hands-on with mechanical products from design and prototyping through testing and production. You'll support mechanical design assignments, create and refine designs, build and evaluate...Long term contractFull timeInternship
- ...primary duties of this position include installations, rebuilds, maintenance and repair of various types of production equipment for the... ...position will have: • A designation as an Industrial Maintenance Mechanic (Millwright), Red Seal or other. • A strong industrial...Hourly payShift workAfternoon shift
- ...Job Details Mechanic on site required for vehicle repairs and maintenance. 1 Vacancy, start date as soon as possible. Day shifts, Evening, weekends can be... ...including fuel system, brakes, steering and suspension, engine and drive train, emission control and exhaust,...Immediate startWeekend workDay shiftAfternoon shift
- ...Job Closing Date (YYYY-MM-DD): 2026-11-04 Job Description Imagine that you could make the open road your office. As an on-call relief Rural and Suburban Mail Carrier with Canada Post, you can. We’re recruiting for dependable, organized individuals to deliver mail on an...Permanent employmentTemporary workWork at officeLocal area
- ...Wausaukee, WI, and Gillett, WI. As a comprehensive manufacturer of engineered composite products, Carfair Composites supplies quality... ...processing, and medical industries. POSITION SUMMARY: The Mold Maintenance Specialist will restore and maintain proper mold geometry for...Permanent employmentFull timeMonday to friday
- ...WI. As a comprehensive manufacturer of engineered composite products, Carfair Composites supplies... ...industries. POSITION SUMMARY: The Maintenance Technician will be responsible for... ...Manufacturing environment. ~ Industrial Mechanic Certification will be considered an...Full timeContract workTemporary workWork at officeMonday to friday
$90k - $112k per year
...Aircraft Mechanic (CH147F) Company: Boeing Canada Operations Ltd Boeing Canada Operations... ...Aircraft Mechanic, reporting to the Maintenance Operations Manager working out of the Petawawa... ...Aviation (TCCA), Aircraft Maintenance Engineer (AME), Avionics Technician (AME-E)...Full timeLive InImmediate startRelocationRelocation packageShift work$50 - $55 per hour
...Description SGS is looking to hire Mechanical / API Inspectors as independent... ...systems, piping components, and pressure relief devices, welded steel atmospheric storage... ...to communicate effectively with welders, engineers, and other personnel. Qualifications...Hourly payLong term contractFull timeContract workTemporary workFor contractorsWork at officeNight shift$17 - $38 per hour
...the physical location. There is no option to work remotely. Work site environment Dirty Noisy Responsibilities Tasks Review work orders Estimate parts and labour cost to perform vehicle maintenance and repairs Perform scheduled maintenance service...Remote work- Overview Languages English Education College/CEGEP Experience Experience an asset Tasks Review work orders Estimate parts and labour cost to perform vehicle maintenance and repairs Perform scheduled maintenance service To Apply Send Your CV:
$31.5 per hour
...components of commercial transport truck systems Inspect and test mechanical units to locate faults and malfunctions Inspect mechanical... ...Estimate parts and labour cost to perform vehicle maintenance and repairs Perform scheduled maintenance service Test and...Permanent employmentFull timeRemote work- ...components of commercial transport truck systems. Inspect and test mechanical units to locate faults and malfunctions. Inspect motor in... ...Repair or replace mechanical units or components. Perform scheduled maintenance service. Complete reports to record problems and work performed...Hourly payPermanent employmentImmediate startWeekend workDay shiftAfternoon shift
- ...throughout the workplace. Collaboration & Continuous Improvement • Work closely with employees, supervisors, managers, maintenance, engineering, human resources, training teams, and workplace committees. • Support implementation of safety initiatives and continuous...Work at office
- ...Winnipeg Shift: Monday to Friday, 11am-7:30pm The Class "A" Mechanic inspects, diagnoses, repairs, and/or installs parts on delivery... ..., operational, and productivity goals and standards Conduct maintenance and repairs, order parts, document and update work orders,...Monday to fridayShift work
- ...corporate career advancement. If you are looking for a future career in hospitality, then the Sandman Hotel Group is for you. The Maintenance Person will be responsible for performing general building and property maintenance. The duties will include Routine Maintenance of...Permanent employmentFull timeInternshipSeasonal workLocal area
- ...opportunities is our passion, and you’re invited to be a part of that. • Our convenient Price Café offers free Tea and Coffee. Maintenance - Custodian Price Industries Limited is looking for an experienced Custodian to support the cleanliness, safety, and upkeep of...Work at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Maintenance Mechanic/Relief Engineer. Be the first to apply!
Related searches
- technicien en réparation Winnipeg, MB
- entry level maintenance technician Winnipeg, MB
- installation and repair technician Winnipeg, MB
- technicien de maintenance bâtiment Winnipeg, MB
- highway maintainer Winnipeg, MB
- mécanicien d'entretien industriel Winnipeg, MB
- industrial maintenance technician Winnipeg, MB
- agent de maintenance Winnipeg, MB
- maintenance mechanic Winnipeg, MB
- maintenance mechanic millwright Winnipeg, MB

