Intermediate Rf Engineer
$80k - $140k per yearEvertz Microsystems Limited
We're hiring an Intermediate RF Engineer to support the design, integration, and verification of advanced RF systems — including RF routers, fiber extenders, DIFI-based RF-over-IP, and transceiver front-end systems — for mission-critical applications. You'll work under the guidance of senior engineering staff, taking ownership of defined design tasks and bench verification, while growing into broader systems-level responsibility over time.This is a hands-on role: you'll be at the bench with a VNA, spectrum analyzer, and signal generator regularly, not just reviewing others' data.
What You'll DoRF System & Subsystem Design
Design and support RF receiver chain elements from antenna port to ADC (LNAs, filters, mixers, amplifiers, switching networks), under senior engineer guidance for system-level architecture
Contribute to RF link budget analysis across HF–Ka-band, including path loss, atmospheric effects, and interference margin
Support noise figure budgets and cascade analyses;
help verify NF, IP3, P1dB, spurious, and dynamic range requirements
Design RF analog circuit elements (matching networks, bias circuits, AGC loops) with support from senior staff on system integration
Apply RF propagation models (free-space, two-ray, terrain-diffraction) to support system validation
Verification & Lab Work
Execute test and verification of assigned designs at the bench (VNA, spectrum analyzer, signal generator, oscilloscope)
Perform NF measurements (Y-factor/cold-source), IMD/IP3 two-tone tests, and spurious emission sweeps under established test plans
Support root-cause analysis of design failures and assist in implementing corrective actions
Support qualification testing (MIL-STD-810 environmental, MIL-STD-461 EMI/EMC) as directed
Systems Engineering
Contribute to requirements review and schematic generation for assigned subsystems
Support documentation: test plans, test conformance forms, and RMA failure analysis input
Participate in design reviews and provide technical input
Collaborate with signal processing, firmware, and mechanical engineering teams on integration
What You Bring — Required
Bachelor's degree in Electrical Engineering or closely related discipline
4–7 years of professional RF hardware design experience (adjust range as needed for your internal leveling)
Solid RF analog design fundamentals: experience with LNA, filter, mixer, or amplifier design (does not need to span all of these at expert level)
Working understanding of radio wave propagation (free-space loss, multipath, terrain effects)
Some exposure to RF link budget modeling
Hands‑on experience with core RF test equipment: VNA, spectrum analyzer, signal generator (noise figure measurement experience a plus, not required)
Familiarity with at least one RF/EDA toolset (Keysight ADS, Microwave Office, PADS, Xpedition, or similar)
Eligible for Government of Canada Reliability Status or Security Clearance
Preferred (Not Required)
Master's degree in EE, RF/Microwave specialization
Exposure to RF digital design concepts: FPGA-based DSP, digital down‑conversion, SDR architectures, JESD204B or similar
Familiarity with DIFI (VITA 49.2) RF‑over‑IP standards
Experience in defence‑standard procurement environments (PWGSC/DND, ITAR, Controlled Goods)
Exposure to RFSoC platforms (Xilinx/AMD Zynq UltraScale+)
MIL-STD-461/810 testing exposure
Background in EW, SIGINT, or spectrum monitoring receiver design
What we Offer:
Employer funded benefits program
Competitive total compensation package
Work-Life Balance
Employee assistance plan
Employee Discount Platform
Career Progression
Casual Work Environment
Social Events and Sports Teams
Onsite Counsellor
Location: Burlington, OntarioHours: Monday to Friday, 40 hours per weekVacancy: This is a newly created positionSalary Range: $80,000 to $140,000 per year, based on experience
About Evertz Microsystems (TSX: ET)
Evertz is a global leader in broadcast technology, delivering cutting‑edge hardware and software solutions that deliver content to television sets, on‑demand services, WebTV, IPTV, and mobile devices (like phones and tablets) worldwide. Trusted by major broadcast facilities, telcos, and satellite providers on every continent, we're known for end‑to‑end innovation that sets the industry standard.
Canadian‑headquartered with offices around the world, Evertz has 2,000+ employees and has been recognized as one of Canada's 50 Best Managed Companies — a testament to our commitment to excellence and global impact.
Join a team where your work shapes the future of broadcast and new media industries.
Evertz is committed to equal opportunity employment. Accommodations are available throughout the recruitment process for applicants with disabilities — please notify HR when scheduling your interview.Artificial intelligence (AI) technology may be used in our recruitment process to assist with resume screening and interview note‑taking. All hiring decisions are made by our team without AI involvement.
Please note, this email address will only respond to requests regarding privacy concerns. This inbox will not respond to job applications, resumes, or questions regarding an application.
When you apply to a job on this site, the personal data contained in your application will be collected by Evertz Microsystems Ltd (“Controller”), which is located at 5292 John Lucas Drive, Burlington, Ontario, Canada and can be contacted by emailing View email address on ca.hrm.tc. Controller’s data protection officer is Nadiera Toolsieram, who can be contacted at View email address on ca.hrm.tc. Your personal data will be processed for the purposes of managing Controller’s and its' subsidiaries’ and affiliates' recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results thereto, and as is otherwise needed in the recruitment and hiring processes. Such processing is legally permissible under Art. 6(1)(f) of Regulation (EU) 2016/679 (General Data Protection Regulation) as necessary for the purposes of the legitimate interests pursued by the Controller, which is the solicitation, evaluation, and selection of applicants for employment.
A complete privacy policy can be found at
Your personal data will be retained by Controller as long as Controller determines it is necessary to evaluate your application for employment. Under the GDPR, you have the right to request access to your personal data, to request that your personal data be rectified or erased, and to request that processing of your personal data be restricted. You also have to right to data portability. In addition, you may lodge a complaint with an EU supervisory authority.
#J-18808-Ljbffr
What You'll DoRF System & Subsystem Design
Design and support RF receiver chain elements from antenna port to ADC (LNAs, filters, mixers, amplifiers, switching networks), under senior engineer guidance for system-level architecture
Contribute to RF link budget analysis across HF–Ka-band, including path loss, atmospheric effects, and interference margin
Support noise figure budgets and cascade analyses;
help verify NF, IP3, P1dB, spurious, and dynamic range requirements
Design RF analog circuit elements (matching networks, bias circuits, AGC loops) with support from senior staff on system integration
Apply RF propagation models (free-space, two-ray, terrain-diffraction) to support system validation
Verification & Lab Work
Execute test and verification of assigned designs at the bench (VNA, spectrum analyzer, signal generator, oscilloscope)
Perform NF measurements (Y-factor/cold-source), IMD/IP3 two-tone tests, and spurious emission sweeps under established test plans
Support root-cause analysis of design failures and assist in implementing corrective actions
Support qualification testing (MIL-STD-810 environmental, MIL-STD-461 EMI/EMC) as directed
Systems Engineering
Contribute to requirements review and schematic generation for assigned subsystems
Support documentation: test plans, test conformance forms, and RMA failure analysis input
Participate in design reviews and provide technical input
Collaborate with signal processing, firmware, and mechanical engineering teams on integration
What You Bring — Required
Bachelor's degree in Electrical Engineering or closely related discipline
4–7 years of professional RF hardware design experience (adjust range as needed for your internal leveling)
Solid RF analog design fundamentals: experience with LNA, filter, mixer, or amplifier design (does not need to span all of these at expert level)
Working understanding of radio wave propagation (free-space loss, multipath, terrain effects)
Some exposure to RF link budget modeling
Hands‑on experience with core RF test equipment: VNA, spectrum analyzer, signal generator (noise figure measurement experience a plus, not required)
Familiarity with at least one RF/EDA toolset (Keysight ADS, Microwave Office, PADS, Xpedition, or similar)
Eligible for Government of Canada Reliability Status or Security Clearance
Preferred (Not Required)
Master's degree in EE, RF/Microwave specialization
Exposure to RF digital design concepts: FPGA-based DSP, digital down‑conversion, SDR architectures, JESD204B or similar
Familiarity with DIFI (VITA 49.2) RF‑over‑IP standards
Experience in defence‑standard procurement environments (PWGSC/DND, ITAR, Controlled Goods)
Exposure to RFSoC platforms (Xilinx/AMD Zynq UltraScale+)
MIL-STD-461/810 testing exposure
Background in EW, SIGINT, or spectrum monitoring receiver design
What we Offer:
Employer funded benefits program
Competitive total compensation package
Work-Life Balance
Employee assistance plan
Employee Discount Platform
Career Progression
Casual Work Environment
Social Events and Sports Teams
Onsite Counsellor
Location: Burlington, OntarioHours: Monday to Friday, 40 hours per weekVacancy: This is a newly created positionSalary Range: $80,000 to $140,000 per year, based on experience
About Evertz Microsystems (TSX: ET)
Evertz is a global leader in broadcast technology, delivering cutting‑edge hardware and software solutions that deliver content to television sets, on‑demand services, WebTV, IPTV, and mobile devices (like phones and tablets) worldwide. Trusted by major broadcast facilities, telcos, and satellite providers on every continent, we're known for end‑to‑end innovation that sets the industry standard.
Canadian‑headquartered with offices around the world, Evertz has 2,000+ employees and has been recognized as one of Canada's 50 Best Managed Companies — a testament to our commitment to excellence and global impact.
Join a team where your work shapes the future of broadcast and new media industries.
Evertz is committed to equal opportunity employment. Accommodations are available throughout the recruitment process for applicants with disabilities — please notify HR when scheduling your interview.Artificial intelligence (AI) technology may be used in our recruitment process to assist with resume screening and interview note‑taking. All hiring decisions are made by our team without AI involvement.
Please note, this email address will only respond to requests regarding privacy concerns. This inbox will not respond to job applications, resumes, or questions regarding an application.
When you apply to a job on this site, the personal data contained in your application will be collected by Evertz Microsystems Ltd (“Controller”), which is located at 5292 John Lucas Drive, Burlington, Ontario, Canada and can be contacted by emailing View email address on ca.hrm.tc. Controller’s data protection officer is Nadiera Toolsieram, who can be contacted at View email address on ca.hrm.tc. Your personal data will be processed for the purposes of managing Controller’s and its' subsidiaries’ and affiliates' recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results thereto, and as is otherwise needed in the recruitment and hiring processes. Such processing is legally permissible under Art. 6(1)(f) of Regulation (EU) 2016/679 (General Data Protection Regulation) as necessary for the purposes of the legitimate interests pursued by the Controller, which is the solicitation, evaluation, and selection of applicants for employment.
A complete privacy policy can be found at
Your personal data will be retained by Controller as long as Controller determines it is necessary to evaluate your application for employment. Under the GDPR, you have the right to request access to your personal data, to request that your personal data be rectified or erased, and to request that processing of your personal data be restricted. You also have to right to data portability. In addition, you may lodge a complaint with an EU supervisory authority.
#J-18808-Ljbffr
Vacancy posted 1 hour ago
Similar jobs that could be interesting for youBased on the Intermediate Rf Engineer in Winnipeg, MB vacancy
- ...Job Description Overview Come join us in reshaping the future with AtkinsRéalis. AtkinsRéalis is dedicated in engineering a better future for our planet and its people. Your role Provides advice, guidance and subject matter expertise throughout the planning, design...SuggestedFor contractorsInternshipWork at officeFlexible hours
- ...to be a part of that. • Our convenient Price Café offers free Tea and Coffee. Position Summary Join our AI team as an Intermediate AI Engineer, where you'll build and deploy AI applications, agents, and automation solutions that solve real business problems. You'll...Suggested
- ...in Hamilton, Ontario, supporting foundations, retaining structures, and major Canadian infrastructure projects. As an Intermediate Foundations Engineer at Egis, you will support geotechnical engineering design and delivery. Your work includes site investigations, soil,...SuggestedInternship
- ...Job Description Overview Our Engineering Services team in Winnipeg is dynamic and tight-knit, servicing local projects while contributing... ...for growth in the Manitoba marketplace, we are looking for an Intermediate Electrical Engineer to join our team in our Winnipeg office....SuggestedFull timeFor contractorsInternshipWork at officeLocal areaFlexible hours
- Calgary Office LocationCalgary, AB T2E, CAN Develop RF engineering design projects by developing project concepts and objectives including demand criteria, coverage, and number of channels; preparing a project plan, including required resources, development timetables,...SuggestedLong term contractTemporary workFor contractorsWork at office
- ...a great team that responds with humility and takes pride in what we deliver. About This OpportunityELITS is looking for an RF Compliance Engineer to support our operations in Mississauga, Ontario. We are seeking an experienced engineer to prepare, independently review...Long term contractFor subcontractorFlexible hours
- ...to Earth and to each other. This role spans link budget analysis, RF hardware design, antenna development, and communications system... ...includingEarth orbit,lunar and other extraterrestrial programs. The RF Engineer will also support the Launch Program on vehicle telemetry,...Full timeWork at office
- Summary As a RF Electrical Engineer within the versatile engineering team, you will act as a technical champion for our products. You will play an integral role in designing new products/solutions and enhancing/maintaining our existing products, especially in the following...Permanent employmentSummer workWork at officeRemote workRelocationFlexible hours
- ...education: Bachelor's or technical degreeRequired specialty: Electrical engineering, telecommunicationsExperience: 3–6 yearsTASKS AND... ...specifications and performance estimates; Selection and design of RF transmission sites ; Development of interconnection specifications...
- Elevate your technical career as an RF Engineer with our Calgary office. This role focuses on developing RF design projects, coverage planning, and analyzing technical practices. The RF Engineer will report to the Manager, Engineer and collaborate with service, inventory...For contractorsWork at office
- Build RF hardware for quantum computing platforms at Nord Quantique in Sherbrooke, using microwave design and signal integrity expertise... ...and experimental systemsRequirements: Degree in electrical engineering, engineering physics, or related disciplineKnowledge of controlled...
- I am hiring for a Billingual (French/ English) RF SC6 Engineer for a client in Canada. It is a one year extendable contract with remote work allowed from within Canada only. Please find below the details and reach out if you have the following MUST haves:Active Professional...Contract workRemote workRelocation
- Shape Sonova’s hearing solutions through RF antenna design, PCB development, and laboratory measurement within a team-customized hybrid... .... A Master’s degree and proven R&D experience support this engineering assignment.Key Responsibilities: Develop PCB antennas from concept...
$60 - $65 per hour
Senior RF Engineer- Job Stage5- ERCSJP00074594Senior RF EngineerRate Range: 60-65$/hr We are seeking an experienced Senior RF Engineer to support the planning, design, compliance, quality review, and delivery of Radio Access Network solutions. Experience with Canadian...Temporary workFor subcontractorRelocation- Innovate in aerospace as an RF Systems Engineer with NordSpace, designing advanced communication systems for satellites and robots. Join a passionate team focused on remarkable space missions. In this in-person Markham role, you'll take significant ownership of RF development...
$102.6k - $163.8k per year
...that matters.Ingénieur(e) principal(e) en conception de circuits RF et analogiquesRelevant du directeur de l’ingénierie optique, l’ingénieur... ...RF/Analog Design EngineerReporting to the Director of Optical Engineering, the Senior RF/Analog Design Engineer will join a...- Lead RF engineering and wireless system design for AtkinsRéalis projects across Canada, supporting transit, public safety, and critical infrastructure programs.This Radio Systems Designer role requires seven-plus years of progressively responsible RF, wireless, telecommunications...
- Lead RF simulation and validation for quantum hardware at Photonic Inc, working hybrid in British Columbia with multidisciplinary engineering teams.This senior hardware engineering position owns the electromagnetic development of RF structures that deliver control signals to...
- About the RoleOur client is seeking a highly motivated and experienced Senior RF Design Engineer to join their innovative team on a fully remote basis. This role is critical for designing, optimizing, and validating radio frequency (RF) systems and components for cutting-edge...Remote workHome office
- Step into the role of Expert Analog and RF Layout Engineer, leveraging your extensive layout design experience. Focus on block-level and full-chip designs using advanced EDA tools in an innovative environment. This position requires over 6 years of experience in Analog and...
- ...to our requirements, we’ll follow up with an exploratory conversation. Job DescriptionWe are looking for an experienced RF and Digital design engineer to contribute to our development efforts on our next generation digital repeater products. The successful individual will...Immediate startRelocationFlexible hours
- A telecommunications company is seeking a 5G RF Performance & Optimization Specialist located in Canada. This role involves analyzing network performance and recommending optimizations, with responsibilities including design activities in customer projects and organizing field...
$96 per hour
The workYou will create expert engineering scenarios and review AI-generated technical responses. Your work will test whether the answers are... ...about firmware architecture, real-time systems, signal analysis, RF design, communications, and hardware/software integration. Check...Hourly payContract workPart timeFor contractorsRemote workFlexible hours- ...? We’d love to hear from you! We are looking for a Power Test Engineer to join our satellite systems team at our Montreal office. Role... ...reports Develop software applications and automated test and RF measurement procedures Code and validate test sequences...Work at officeFlexible hours
- Apply microwave theory, electromagnetics, and antenna design expertise as a fully remote Senior RF Design Engineer for telecommunications products.This experienced engineer develops RF solutions for wireless communication systems and components. The position requires a Master...Remote work
- Design next generation digital repeaters at Motorola Solutions using RF engineering and digital design expertise. This is an experienced pipeline role without an immediate opening.You will contribute to development efforts with engineers and software developers, architecting...Immediate startFlexible hours
$130k - $150k per year
...We are seeking a highly experienced Intermediate or Senior Civil Engineer to serve as the Professional of Record for civil engineering deliverables supporting electrical distribution projects. This... The pay range for this position is $130000.00 - $150000.00/yr. Individual...Permanent employmentFor contractorsWork at office$85k - $115k per year
...for technical excellence, client satisfaction, and industry leadership. Key Responsibilities:Technical Leadership Serve as the Engineer of Record (EoR)for company projects. Lead or support building envelope investigations, assessments, and design projects. Oversee...Full time- Job Description Overview We are currently seeking a dynamic, growth‑focused Geotechnical Engineer (P.Eng.) to join our Geotechnical Practice in British Columbia. This role is based out of Vancouver, BC. Our current workload includes a portfolio of diverse projects across...InternshipFlexible hours
- Senior RF Engineer – Electromagnetic Design & Simulation at Photonic Inc, British Columbia, Canada (Hybrid). A senior-level full time position in the Engineering team, listed under hardware engineering. We are looking for a Senior RF Engineer to join our hardware team and own...Full time
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Intermediate Rf Engineer. Be the first to apply!
Related searches
- solid waste engineer Winnipeg, MB
- voip engineer Winnipeg, MB
- resident engineer Winnipeg, MB
- ingenieur Winnipeg, MB
- certification engineer Winnipeg, MB
- failure analysis engineer Winnipeg, MB
- engineering summer student Winnipeg, MB
- graduate engineer Winnipeg, MB
- junior engineer Winnipeg, MB
- forklift engineer Winnipeg, MB

